WATER QUALITY NJ

Water Quality in Dayton, NJ: No Violations — Grade D

Grade D · Score 52/100 · 1 water system · Updated 2026-05-03

Dayton's water has significant violations. Water testing and filtration are recommended.

Data: EPA Safe Drinking Water Information System (SDWIS) Last verified: 2026-05-03

Not one violation appears in NJ's EPA file for Dayton — 1 monitored system, all clear.

D
Water Grade
0
Total Violations
1
Water Systems
0
ZIPs with Violations
1
ZIP Codes Monitored

Water Quality by ZIP Code in Dayton

Water quality varies across Dayton's 1 ZIP codes. Check your specific ZIP for detailed contaminant data.

ZIP Code Grade Score Violations Health
08810 D 52 0 0 View report →

Water Quality Overview

Dayton, New Jersey receives a water quality grade of D with an overall score of 52 out of 100, based on EPA compliance data from the Safe Drinking Water Information System (SDWIS).

No EPA violations have been recorded for the 1 water system serving Dayton. This is a positive indicator, though it does not guarantee the absence of all contaminants — some substances (like PFAS) are not yet fully regulated.

What Grade D Means

A grade of D indicates significant compliance issues. Dayton's water systems have accumulated violations that suggest ongoing water quality challenges. Residents should check their specific ZIP code report and consider water testing or filtration.

Lead Levels

Lead testing data for Dayton is currently being collected. The EPA requires all community water systems to test for lead under the Lead and Copper Rule.

With 42% of homes built before 1986, Dayton has a higher-than-average risk of lead from older plumbing. Lead solder was banned in 1986, and homes built before this date may have lead in pipes, solder joints, or fixtures.

Radon Risk

Dayton is in EPA Radon Zone 1 (High risk). The EPA recommends all homes in Zone 1 areas be tested for radon. Radon is the second leading cause of lung cancer after smoking.

Water Systems Serving Dayton

Dayton is served by 1 community water system regulated under the Safe Drinking Water Act. These systems collectively serve approximately 45,450 people across 1 ZIP codes.

Each water system is identified by a Public Water System ID (PWSID) and is required to:

  • Test for over 90 regulated contaminants on a regular schedule
  • Report results to the EPA and state regulators
  • Issue an annual Consumer Confidence Report (CCR) to all customers
  • Take corrective action when violations occur

How to Check Your Water in Dayton

  1. Enter your ZIP code on ZipCheckup to see your specific water system data, including contaminant levels, violation history, and safety scores

  2. Request your CCR — your water utility must provide an annual Consumer Confidence Report with detailed test results for all monitored contaminants

  3. Get a home test — certified kits cost $20–$50 and test for lead, bacteria, and common contaminants. Professional lab tests ($150–$400) cover a broader panel

  4. Consider filtration — NSF-certified filters can remove specific contaminants. Reverse osmosis removes the broadest range; activated carbon is effective for chlorine and many organics

  5. Check for advisories — monitor your local utility website and local news for boil water advisories or system alerts

Dayton vs. Nearby New Jersey Cities

How Dayton's water quality compares to similar cities in New Jersey:

City Grade Violations Systems Population
Dayton D 0 1 45,450
Belle Mead D 0 1 45,450
Kendall Park D 0 1 45,450
Kingston D 0 1 45,450

Common Questions About Dayton Water

These are the most common questions residents search for about water quality in Dayton, New Jersey:

Is Dayton water hard or soft? Water hardness varies by source. Dayton's 1 water system uses a single source. Check your ZIP code report for specific hardness data.

Can I drink Dayton tap water? Dayton's water receives a grade of D (52/100). No health-based violations have been recorded, but home testing is always recommended.

What is the best water filter for Dayton? A NSF/ANSI 53-certified filter for lead removal is a good general choice. See our Water Filter Matcher for personalized recommendations.

Dayton vs. New Jersey Average

Understanding how Dayton compares to the broader New Jersey average helps contextualize your local water quality. Factors like water source, treatment methods, and infrastructure age all contribute to differences between cities in the same state.

To see how individual neighborhoods compare, check the ZIP code reports below — water quality can vary significantly even within Dayton.

ZIP Codes in Dayton

Dayton spans 1 ZIP code. Each ZIP code has its own water quality profile based on the specific water system serving that area. Check each ZIP code for detailed contaminant data, violation history, and system information.

Data Sources

Updated daily.

Frequently Asked Questions

Is Dayton tap water safe to drink?
Dayton's water receives a grade of D (52/100). 0 health-based violations have been recorded. Independent water testing and filtration are recommended.
What contaminants are found in Dayton water?
Dayton water systems have zero recorded violations. While this is excellent, the EPA recommends annual testing as contaminants can enter your water through home plumbing.
How many water violations does Dayton have?
Dayton has 0 total EPA violations across 1 water system. 0 of 1 ZIP codes have at least one violation.
How many water systems serve Dayton?
Dayton is served by 1 public water system supplying drinking water across 1 ZIP codes. Water quality can vary between systems — check your specific ZIP code for localized data.
HomeCitiesNew JerseyDayton, NJ → Water Quality

Get safety alerts for Dayton, New Jersey

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool — no phone call required.