Dayton, NJ: 1 Health Violation - Home Safety 66/100
1 ZIP code · 1 water system · Updated
ZipCheckup grade for Dayton: C.
A mixed picture - some signals here are worth your attention.
Compliance figures for Dayton indicate average water quality in NJ overall - some service areas have recorded health-based violations in recent monitoring cycles, while others operate cleanly, making system-level data the most actionable reference point for residents.
How Dayton Compares
Data: EPA SDWIS
Key Facts for Dayton Residents
- Your city's water systems recorded 6 violations in the past 5 years.
- Homes built before 1986: 42% - older plumbing may contain lead solder.
- Estimated remediation: $1,800 per household.
- CDC health risk index: 10.8.
Dayton's Water Providers
Water service in Dayton, NJ is organized around a single utility - one of 1 tracked by regulator, and the one that manages the local distribution network while holding primary responsibility for EPA compliance reporting.
- C
Overview
We track home safety data for 1 ZIP code in Dayton, New Jersey (population ~8,241), covering 1 community water system serving approximately 45,450 people region-wide. The EPA snapshots used for this build directly map water systems to 1 of 1 ZIP codes.
1 of 1 ZIP code with a reported violation count in the available EPA record (100%) have recorded EPA violations. 1 health-based violation appear in the available health breakdown.
Home Safety Score
Average Home Safety Score for Dayton: C (66/100)
Model 4.0.0 uses four measured components across three equally weighted domains. If a required domain is unavailable, no score is published:
| Factor | What It Measures |
|---|---|
| Water Quality | EPA violations and compliance history |
| PFAS MCL Screen | UCMR 5 testing against the covered federal MCLs |
| Radon Risk | EPA radon zone classification |
| Annual AQI | EPA AirData county-year median with at least 90 observed days |
Water Sources
Dayton water systems draw from: Surface water.
Lead & Copper
- Average lead level (90th percentile): 0.0000 mg/L (EPA action level: 0.015 mg/L)
- 0 of 1 ZIP code with known status exceed the EPA lead action level
Top Contaminants
| Contaminant | Category | Violations | ZIPs Affected |
|---|---|---|---|
| Stage 1 DBP Rule | Treatment Technique | 6 | 1 |
| Haloacetic Acids (HAA5) | Disinfection Byproducts | 4 | 1 |
| Total Trihalomethanes (TTHM) | Disinfection Byproducts | 2 | 1 |
Areas with Most Violations
| ZIP Code | Safety Score | Violations | Health-Based | System |
|---|---|---|---|---|
| 08810 | C | 6 | 1 | South Brunswick Twp W Di |
All ZIP Codes in Dayton
- 08810 [C] - 6 violations ⚠
Data Sources
- Water quality: EPA Safe Drinking Water Information System (SDWIS)
- Lead/copper: EPA Lead and Copper Rule sampling data
- Radon: EPA Map of Radon Zones
Reporting periods vary by source. Missing data is shown as unavailable, not as zero.
Dayton Community Health Snapshot
Source: CDC PLACES (County-level estimates). Water contamination can correlate with respiratory and chronic health conditions.
Compared to National Average
Vertical line = national average. ■ Above national · ■ Below national
What's in Dayton's Water?
Based on EPA violation records. Check your ZIP code report for system-specific contaminant data.
Dayton Infrastructure Age
With 42% of homes built before 1986, lead solder in plumbing is a potential concern. The EPA banned lead solder in 1986, but many older homes retain original plumbing.
Source: U.S. Census Bureau American Community Survey (ACS).
Housing Age Profile
When trying to understand water quality at the household level, the year a home was built often matters more than any city-wide water report. That's because the 1986 federal ban on lead solder in plumbing, and the earlier phase-out of lead pipes before 1970, created sharp discontinuities in residential plumbing risk by construction era. Dayton's median build year of 1982 puts the city in the transition zone: a substantial share of the housing stock postdates the solder ban, but a comparable fraction predates it - with the oldest homes carrying both the solder risk and the pipe risk simultaneously. Whether any individual household sits on the safer or riskier side of these thresholds is the key question, and it's one the city-wide median alone can't answer.
Most homes in Dayton were built after 1986, reducing the risk of lead contamination from plumbing. Older homes should still be tested.
Source: U.S. Census Bureau ACS B25034.
How Remediation Costs Compare in Dayton
The household financial picture for Dayton homeowners is proportionally favorable - addressing documented issues claims a small slice of equity, and the cost-to-value ratio puts this area well within the manageable tier.
Remediation costs in Dayton are relatively low compared to home values. The $1,200–$2,600 estimated range is a small fraction of median property value. Home values are 2% below the New Jersey average.
Dayton: Lead Risk & Vulnerable Populations
Why children are most at risk: The CDC states there is no safe level of lead exposure for children. Children under 6 absorb lead more readily than adults, and even low levels can cause developmental delays, learning difficulties, and behavioral problems.
Confirming what arrives at a specific faucet is something utility-side averages cannot do. With 42% of Dayton stock built before the lead-solder ban and citywide monitoring at or beyond the regulatory mark, a tap-level kit fits the standard diligence picture.
Sources: EPA Lead and Copper Rule, U.S. Census Bureau ACS, CDC childhood lead poisoning prevention guidelines.
Dayton: NFIP Claim Records and Water-Quality Context
Historical NFIP data for Dayton contains 16 flood insurance claims. Among claims with payment data, the average reported building, contents, and ICC component sum is $6,127. Among ZIP codes with claim records, 100% have an A- or V-family dominant rated zone recorded in those historical claims. This is not a complete current FEMA property-map inventory.
How flooding affects water quality: Flood events can introduce sewage, agricultural runoff, and industrial chemicals into water supplies. Even after floodwaters recede, contamination can persist in wells and aging infrastructure. The <strong>$1,800</strong> remediation estimate shown here excludes flood insurance and is not derived from NFIP claim count.
Claim count does not establish current property risk. Check the exact address in FEMA's current map and obtain a property-specific insurance quote when relevant.
Source: historical FEMA National Flood Insurance Program (NFIP) claim records. No current FEMA property-map designation is asserted.
What You Can Do in Dayton
- Test your water at home. City-level data shows averages - your tap may differ. NSF-certified test kits cost $20-40 and give results in days.
- Install a certified water filter. Filters rated for Stage 1 DBP Rule can reduce the most common contaminant found in Dayton's water.
- Check your home's plumbing. With 42% of homes built before 1986, lead solder is a real possibility.
Deep Dive Reports
Detailed analysis for Dayton, NJ