CITY REPORT NC 1 HEALTH VIOLATIONS

Marble, NC: 1 Health Violation — 68/100 (2026)

1 ZIP code · 3 water systems · Updated 2026-06-03

Although much of Marble meets baseline drinking water standards, some NC-tracked service areas show violations that merit a closer look — particularly for older housing stock.

How Marble Compares

Marble68/100
North Carolina avg73/100
National avg67/100

Data: EPA SDWIS Last verified: 2026-06-03

1
ZIP Codes
3
Water Systems
1
ZIPs with Violations
C · 68
Avg Safety Score
Zone 1
Radon Risk (High)
$214K
Median Home Value
$3,300
Est. Remediation (1.5% of home value)

What You Should Know About Marble Water

  • Your city's water systems recorded 9 violations in the past 5 years.
  • Average lead level: 0.0055 mg/L.
  • Homes built before 1986: 27% — older plumbing may contain lead solder.
  • Estimated remediation: $3,300 per household.
  • CDC health risk index: 15.84 — above typical levels.

Who Supplies Your Water in Marble

In Marble, NC, residential water supply is distributed across multiple utilities rather than concentrated in one. The 3 leading providers out of 3 tracked systems each control their own infrastructure, file separate EPA compliance reports, and set independent rate schedules.

MURPHY, TOWN OF
Serves ~4,498 people · 9 violations
68
/100
ANDREWS, TOWN OF
Serves ~3,284 people · 9 violations
68
/100
Marble Community Wtr System
Serves ~999 people · 9 violations
68
/100

Overview

We track water quality and home safety data for 1 ZIP code in Marble, North Carolina (population ~3,316), covering 3 community water systems serving approximately 8,781 people region-wide.

1 of 1 ZIP code (100%) have recorded EPA violations. 1 health-based violation documented.

Home Safety Score

Average Home Safety Score for Marble: C (68/100)

The score combines three factors:

Factor What It Measures
Water Quality EPA violations and compliance history
Lead Levels 90th percentile lead concentration vs EPA action level
Radon Risk EPA radon zone classification

Water Sources

Marble water systems draw from: Groundwater.

Lead & Copper

  • Average lead level (90th percentile): 0.0055 mg/L (EPA action level: 0.015 mg/L)
  • 0 ZIP codes exceed the EPA lead action level

Radon Risk

Dominant radon zone: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Top Contaminants

Contaminant Category Violations ZIPs Affected
Surface Water Treatment Rule Treatment Technique 6 1
Stage 2 DBP Rule Treatment Technique 4 1
Contaminant 2040 Other 2 1
Total Trihalomethanes (TTHM) Disinfection Byproducts 2 1
Stage 1 DBP Rule Treatment Technique 2 1

Areas with Most Violations

ZIP Code Safety Score Violations Health-Based System
28905 C 9 1 Marble Community Wtr System

All ZIP Codes in Marble

  • 28905 [C] — 9 violations ⚠

Data Sources

Updated daily.

Health Outcomes in Marble

10.7%
Asthma (US: 9.8%)
15.2%
Diabetes (US: 10.4%)
15.7%
Poor Mental Health (US: 14.8%)

Source: CDC PLACES (County-level estimates). Water contamination can correlate with respiratory and chronic health conditions.

Compared to National Average

Asthma 10.7% ↑
Diabetes 15.2% ↑
Mental Health 15.7% ↑

Vertical line = national average. Above national · Below national

Top Contaminants in Marble Water

Surface Water Treatment Rule 6 violations
Treatment Technique
Pathogens may not be adequately removed
Stage 2 DBP Rule 4 violations
Treatment Technique
Disinfection byproduct exposure risk
Contaminant 2040 2 violations
Other

Based on EPA violation records. Check your ZIP code report for system-specific contaminant data.

Housing & Infrastructure in Marble

1991
Median Build Year
27%
Built Before 1986
11%
Built Before 1970
Copper
Likely Pipe Material

Housing age data helps assess potential lead pipe and infrastructure risks. Newer housing stock generally means lower plumbing-related contamination risk.

Source: U.S. Census Bureau American Community Survey (ACS).

Housing Age Profile

Marble's housing stock skews relatively recent, with a median build year of 1991. Homes constructed after 1986 avoid the lead-soldered copper joints that were standard before the federal ban — reducing aggregate risk from plumbing as a contamination pathway.

1991
Median Year Built
27%
Pre-1986 (Lead Paint Risk)
11%
Pre-1970 (Lead Pipes Risk)
Pre-1970 (11%) 1970–1986 (16%) Post-1986 (73%)

Most homes in Marble were built after 1986, reducing the risk of lead contamination from plumbing. Older homes should still be tested.

Source: U.S. Census Bureau ACS B25034.

Cost Context: What Remediation Means for Marble Homeowners

Across the Marble housing market, the estimated remediation share lands in a middle tier — not a minor footnote, but not a prohibitive burden either; the cost-to-value ratio reflects a moderate equity commitment, one that sits above routine maintenance territory and warrants a dedicated line in the household budget.

Median Home Value
$213,800
Est. Remediation
$3,300
Remediation as % of home value 1.5%

Remediation costs are moderate relative to home values in Marble. The estimated $2,150–$4,600 range is manageable for most homeowners but still worth budgeting for. Home values are 9% below the North Carolina average.

Lead Exposure Risk for Children in Marble

27%
Homes Built Before 1986
0.0055
mg/L Avg Lead (Limit: 0.015)

Why children are most at risk: The CDC states there is no safe level of lead exposure for children. Children under 6 absorb lead more readily than adults, and even low levels can cause developmental delays, learning difficulties, and behavioral problems.

Generally, the structural picture for Marble runs in a quiet direction. Aggregate sampling rests under the federal action benchmark, and 27% of housing comes from the pre-rule era — a contained local footprint. That dual signal keeps lead in the background of local concerns, while a one-faucet measurement still answers a different question than any system average can: what is actually flowing from one specific tap on a given morning.

Sources: EPA Lead and Copper Rule, U.S. Census Bureau ACS, CDC childhood lead poisoning prevention guidelines.

Flood & Climate Risk in Marble

Flood activity in Marble is neither negligible nor at the level of the highest-exposure areas in the NFIP dataset. The 2-claim record and 100% flood zone coverage suggest a community that has experienced recurrent events but has not faced the kind of sustained, severe exposure where water-supply contamination becomes a primary public health concern. It sits in a middle range where flood history merits inclusion in any complete local water quality picture.

2
Total FEMA Flood Claims
100%
ZIPs in FEMA Flood Zones

Marble has a moderate flood history with 2 FEMA claims. 100% of ZIP codes fall within FEMA flood zones. Flood events can contaminate drinking water and overwhelm treatment systems.

How flooding affects water quality: Flood events can introduce sewage, agricultural runoff, and industrial chemicals into water supplies. Even after floodwaters recede, contamination can persist in wells and aging infrastructure. Flood damage can add significantly to the estimated <strong>$3,300</strong> remediation cost per household.

Residents in flood-prone areas should consider flood insurance even outside FEMA zones — over 25% of flood claims come from low-to-moderate risk areas. After any flood event, test your water before drinking.

Source: FEMA National Flood Insurance Program (NFIP) claims data, FEMA flood zone designations.

What You Can Do in Marble

  1. Test your water at home. City-level data shows averages — your tap may differ. NSF-certified test kits cost $20-40 and give results in days.
  2. Install a certified water filter. Filters rated for Surface Water Treatment Rule can reduce the most common contaminant found in Marble's water.
  3. Check your home's plumbing. Homes built before 1986 may have lead solder in pipes. A licensed plumber can assess your risk.

Frequently Asked Questions

Is the water safe to drink in Marble, NC?
Marble has an average water safety score of 68/100 (Grade C). 9 EPA violations have been recorded. Check individual ZIP code reports for details specific to your neighborhood.
How many water violations does Marble have?
Marble water systems have a total of 9 EPA violations, including 1 health-based violation. Violations are tracked across 1 ZIP code.
Does Marble water have lead?
The average 90th-percentile lead level in Marble is 0.0055 mg/L. This is below the EPA action level of 0.015 mg/L. Lead levels can vary by home — testing is recommended especially in older properties.
How does Marble compare to North Carolina average?
Marble has an average water safety score of 68/100, which is below the North Carolina state average of 73/100.
How many water systems serve Marble?
Marble is served by 3 public water systems across 1 ZIP code, serving approximately 3,316 people.
How much does it cost to fix water issues in Marble?
Estimated remediation costs in Marble average $3,300 per household, ranging from $2,150 to $4,600. Costs include filtration, pipe replacement, radon mitigation, and flood protection.
HomeCitiesNorth Carolina → Marble, NC

Get safety alerts for Marble, North Carolina

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.