CITY REPORT MN

Canby, MN: High Radon Risk — 62/100 (2026)

1 ZIP code · 2 water systems · Updated 2026-06-03

Water monitoring across Canby paints a mid-range picture within MN — solid compliance in some service zones, documented concerns in others. Most violations on record are concentrated in specific areas, and the overall grade has held in the middle tier without major shifts in recent monitoring cycles.

How Canby Compares

Canby62/100
Minnesota avg62/100
National avg67/100

Data: EPA SDWIS Last verified: 2026-06-03

1
ZIP Codes
2
Water Systems
0
ZIPs with Violations
C · 62
Avg Safety Score
Zone 1
Radon Risk (High)
$163K
Median Home Value
$2,400
Est. Remediation (1.5% of home value)

What You Should Know About Canby Water

  • Homes built before 1986: 81% — older plumbing may contain lead solder.
  • Estimated remediation: $2,400 per household.
  • CDC health risk index: 13.89 — above typical levels.

Who Supplies Your Water in Canby

Residential addresses in Canby, MN are served by 2 primary water providers out of 2 systems in federal records. Each system maintains separate infrastructure and files its own EPA compliance reports, so service conditions are not uniform across the city.

Lincoln-Pipestone Rural Water System
Serves ~13,644 people
62
/100
Canby
Serves ~1,769 people
62
/100

Overview

We track water quality and home safety data for 1 ZIP code in Canby, Minnesota (population ~2,705), covering 2 community water systems serving approximately 15,413 people region-wide.

No EPA violations recorded across any ZIP codes in Canby — an excellent indicator of water quality.

Home Safety Score

Average Home Safety Score for Canby: C (62/100)

The score combines three factors:

Factor What It Measures
Water Quality EPA violations and compliance history
Lead Levels 90th percentile lead concentration vs EPA action level
Radon Risk EPA radon zone classification

Water Sources

Canby water systems draw from: Groundwater.

Lead & Copper

  • Lead data: not yet available for Canby
  • 0 ZIP codes exceed the EPA lead action level

Radon Risk

Dominant radon zone: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Areas with No Violations

ZIP Code Safety Score System Population
56220 C Lincoln-Pipestone Rural Water System 13,644

All ZIP Codes in Canby

Data Sources

Updated daily.

Health Outcomes in Canby

10.2%
Asthma (US: 9.8%)
12.4%
Diabetes (US: 10.4%)
15.7%
Poor Mental Health (US: 14.8%)

Source: CDC PLACES (County-level estimates). Water contamination can correlate with respiratory and chronic health conditions.

Compared to National Average

Asthma 10.2% ↑
Diabetes 12.4% ↑
Mental Health 15.7% ↑

Vertical line = national average. Above national · Below national

Housing & Infrastructure in Canby

1953
Median Build Year
81%
Built Before 1986
52%
Built Before 1970
Galvanized Steel or Copper
Likely Pipe Material

With 81% of homes built before 1986, lead solder in plumbing is a potential concern. The EPA banned lead solder in 1986, but many older homes retain original plumbing.

Source: U.S. Census Bureau American Community Survey (ACS).

Housing Age Profile

For residents trying to assess tap water risk in Canby, the median build year of 1953 is the starting context. It signals that a majority of homes were constructed before 1986 — the year federal rules prohibited lead solder in new plumbing — and that a significant share likely predates 1970, when lead pipes were still a common choice for residential service connections. Neither risk tier is rare in this housing inventory.

1953
Median Year Built
81%
Pre-1986 (Lead Paint Risk)
52%
Pre-1970 (Lead Pipes Risk)
Pre-1970 (52%) 1970–1986 (29%) Post-1986 (19%)

Over half of homes in Canby were built before 1986, when lead solder was banned. Older plumbing may leach lead into drinking water, especially with corrosive water chemistry.

Source: U.S. Census Bureau ACS B25034.

Cost Context: What Remediation Means for Canby Homeowners

Although the Canby remediation share is moderate, it remains reachable for most homeowners who plan for the expense in advance.

Median Home Value
$162,500
Est. Remediation
$2,400
Remediation as % of home value 1.5%

Remediation costs are moderate relative to home values in Canby. The estimated $1,600–$3,300 range is manageable for most homeowners but still worth budgeting for. Home values are 32% below the Minnesota average.

Lead Exposure Risk for Children in Canby

81%
Homes Built Before 1986

Why children are most at risk: The CDC states there is no safe level of lead exposure for children. Children under 6 absorb lead more readily than adults, and even low levels can cause developmental delays, learning difficulties, and behavioral problems.

Before the federal solder ban, lead solder was a routine plumbing material, and 81% of the Canby inventory was built in that earlier era — a share large enough to move household-level reads onto the standard list.

Sources: EPA Lead and Copper Rule, U.S. Census Bureau ACS, CDC childhood lead poisoning prevention guidelines.

Flood & Climate Risk in Canby

FEMA data shows 100% of Canby's ZIP codes mapped into designated flood zones, paired with an NFIP record of 3 claims. That footprint places local flood exposure in the range where it warrants attention without rising to high-severity planning territory.

3
Total FEMA Flood Claims
$976
Avg Claim Payout
100%
ZIPs in FEMA Flood Zones

Canby has a moderate flood history with 3 FEMA claims averaging $976 per payout. 100% of ZIP codes fall within FEMA flood zones. Flood events can contaminate drinking water and overwhelm treatment systems.

How flooding affects water quality: Flood events can introduce sewage, agricultural runoff, and industrial chemicals into water supplies. Even after floodwaters recede, contamination can persist in wells and aging infrastructure. Flood damage can add significantly to the estimated <strong>$2,400</strong> remediation cost per household.

Residents in flood-prone areas should consider flood insurance even outside FEMA zones — over 25% of flood claims come from low-to-moderate risk areas. After any flood event, test your water before drinking.

Source: FEMA National Flood Insurance Program (NFIP) claims data, FEMA flood zone designations.

What You Can Do in Canby

  1. Test your water at home. City-level data shows averages — your tap may differ. NSF-certified test kits cost $20-40 and give results in days.
  2. Install a certified water filter. An NSF-certified pitcher or under-sink filter removes most common contaminants.
  3. Check your home's plumbing. With 81% of homes built before 1986, lead solder is a real possibility.

Frequently Asked Questions

Is the water safe to drink in Canby, MN?
Canby has an average water safety score of 62/100 (Grade C). No EPA violations on record. Check individual ZIP code reports for details specific to your neighborhood.
How does Canby compare to Minnesota average?
Canby has an average water safety score of 62/100, which is above the Minnesota state average of 62/100.
How many water systems serve Canby?
Canby is served by 2 public water systems across 1 ZIP code, serving approximately 2,705 people.
How much does it cost to fix water issues in Canby?
Estimated remediation costs in Canby average $2,400 per household, ranging from $1,600 to $3,300. Costs include filtration, pipe replacement, radon mitigation, and flood protection.
HomeCitiesMinnesota → Canby, MN

Get safety alerts for Canby, Minnesota

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool — no phone call required.