CITY REPORT MA 2 HEALTH VIOLATIONS

Milford, MA: 2 Health Violations — 57/100 (2026)

1 ZIP code · 5 water systems · Updated 2026-06-03

Recent monitoring in Milford shows middle-tier safety for MA — some systems are clean; others have logged EPA violations.

How Milford Compares

Milford57/100
Massachusetts avg66/100
National avg67/100

Data: EPA SDWIS Last verified: 2026-06-03

1
ZIP Codes
5
Water Systems
1
ZIPs with Violations
C · 57
Avg Safety Score
Zone 1
Radon Risk (High)
$444K
Median Home Value
$3,300
Est. Remediation (0.7% of home value)

Milford Water: The Quick Version

  • Your city's water systems recorded 3 violations in the past 5 years.
  • Average lead level: 0.001 mg/L.
  • Homes built before 1986: 76% — older plumbing may contain lead solder.
  • Estimated remediation: $3,300 per household.
  • CDC health risk index: 12.17 — above typical levels.

Water Systems Serving Milford

Federal records list 5 water systems tied to Milford, MA. Of those, 3 are the primary providers, meaning service conditions, rate structures, and compliance histories can differ depending on where a property sits.

Milford Water Department
Serves ~30,379 people · 3 violations
57
/100
Mci Shirley
Serves ~3,500 people · 3 violations
57
/100
Mci Bridgewater
Serves ~2,802 people · 3 violations
57
/100

Overview

We track water quality and home safety data for 1 ZIP code in Milford, Massachusetts, covering 5 community water systems serving approximately 30,473 people.

1 of 1 ZIP code (100%) have recorded EPA violations. 2 health-based violations documented.

Home Safety Score

Average Home Safety Score for Milford: C (57/100)

The score combines three factors:

Factor What It Measures
Water Quality EPA violations and compliance history
Lead Levels 90th percentile lead concentration vs EPA action level
Radon Risk EPA radon zone classification

Water Sources

Milford water systems draw from: Groundwater, Surface water.

Lead & Copper

  • Average lead level (90th percentile): 0.0010 mg/L (EPA action level: 0.015 mg/L)
  • 0 ZIP codes exceed the EPA lead action level

Radon Risk

Dominant radon zone: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Top Contaminants

Contaminant Category Violations ZIPs Affected
Haloacetic Acids (HAA5) Disinfection Byproducts 4 1
Stage 1 DBP Rule Treatment Technique 2 1

Areas with Most Violations

ZIP Code Safety Score Violations Health-Based System
01757 C 3 2 Milford Water Department

All ZIP Codes in Milford

  • 01757 [C] — 3 violations ⚠

Data Sources

Updated daily.

CDC Health Data for Milford

12.1%
Asthma (US: 9.8%)
10.4%
Diabetes (US: 10.4%)
17.2%
Poor Mental Health (US: 14.8%)

Source: CDC PLACES (County-level estimates). Water contamination can correlate with respiratory and chronic health conditions.

Compared to National Average

Asthma 12.1% ↑
Diabetes 10.4% ↓
Mental Health 17.2% ↑

Vertical line = national average. Above national · Below national

Key Contaminants Detected in Milford

Haloacetic Acids (HAA5) 4 violations
Disinfection Byproducts · EPA limit: 0.06 mg/L
Increased cancer risk with long-term exposure
Stage 1 DBP Rule 2 violations
Treatment Technique
Disinfection byproduct exposure risk

Based on EPA violation records. Check your ZIP code report for system-specific contaminant data.

How Old Is Milford's Housing Stock?

1979
Median Build Year
76%
Built Before 1986
39%
Built Before 1970
Copper
Likely Pipe Material

With 76% of homes built before 1986, lead solder in plumbing is a potential concern. The EPA banned lead solder in 1986, but many older homes retain original plumbing.

Source: U.S. Census Bureau American Community Survey (ACS).

Housing Age Profile

Housing age is one of the most reliable proxies for plumbing-era lead risk, because two federal milestones — the widespread use of lead pipes before 1970 and the continued use of lead solder until 1986 — define the highest-risk tiers of the residential housing stock. With a median build year of 1979, Milford falls squarely within the older range — meaning a large fraction of the housing was built under the plumbing standards of those earlier eras. The distribution above captures where that risk concentrates, and why older neighborhoods warrant particular attention from residents concerned about tap water quality.

1979
Median Year Built
76%
Pre-1986 (Lead Paint Risk)
39%
Pre-1970 (Lead Pipes Risk)
Pre-1970 (39%) 1970–1986 (37%) Post-1986 (24%)

Over half of homes in Milford were built before 1986, when lead solder was banned. Older plumbing may leach lead into drinking water, especially with corrosive water chemistry.

Source: U.S. Census Bureau ACS B25034.

Milford: Remediation Cost in Perspective

What does remediation cost in financial context for Milford homeowners? Proportionally very little — the equity share here is low, and addressing documented issues is a manageable planning question rather than a material financial burden.

Median Home Value
$444,100
Est. Remediation
$3,300
Remediation as % of home value 0.7%

Remediation costs in Milford are relatively low compared to home values. The $2,150–$4,700 estimated range is a small fraction of median property value. Home values are 21% below the Massachusetts average.

Protecting Children from Lead in Milford

76%
Homes Built Before 1986
0.001
mg/L Avg Lead (Limit: 0.015)

Why children are most at risk: The CDC states there is no safe level of lead exposure for children. Children under 6 absorb lead more readily than adults, and even low levels can cause developmental delays, learning difficulties, and behavioral problems.

76% — that captures the slice of Milford housing dating from before the federal ban on solder containing lead. It pairs with aggregate utility readings that either approach or cross 0.015 mg/L, the benchmark set under the EPA Lead and Copper Rule. Together, the two figures shift one-home reads into a standard household-level confirmation, particularly for families with kids. A certified lead-removal filter is available through retailer-verified channels if a kit returns results that warrant additional measures.

Sources: EPA Lead and Copper Rule, U.S. Census Bureau ACS, CDC childhood lead poisoning prevention guidelines.

Climate-Related Water Risk for Milford

100% of ZIP codes in Milford are mapped into FEMA-designated flood zones, and the NFIP records 25 claims reflecting a multi-event flood history. That combination places local flood exposure in the range where water-quality implications deserve at least periodic attention.

25
Total FEMA Flood Claims
$2,684
Avg Claim Payout
100%
ZIPs in FEMA Flood Zones
~1
Est. Claims/Year

Milford has a moderate flood history with 25 FEMA claims averaging $2,684 per payout. 100% of ZIP codes fall within FEMA flood zones. Flood events can contaminate drinking water and overwhelm treatment systems.

How flooding affects water quality: Flood events can introduce sewage, agricultural runoff, and industrial chemicals into water supplies. Even after floodwaters recede, contamination can persist in wells and aging infrastructure. Flood damage can add significantly to the estimated <strong>$3,300</strong> remediation cost per household.

Residents in flood-prone areas should consider flood insurance even outside FEMA zones — over 25% of flood claims come from low-to-moderate risk areas. After any flood event, test your water before drinking.

Source: FEMA National Flood Insurance Program (NFIP) claims data, FEMA flood zone designations.

What You Can Do in Milford

  1. Test your water at home. City-level data shows averages — your tap may differ. NSF-certified test kits cost $20-40 and give results in days.
  2. Install a certified water filter. Filters rated for Haloacetic Acids (HAA5) can reduce the most common contaminant found in Milford's water.
  3. Check your home's plumbing. With 76% of homes built before 1986, lead solder is a real possibility.

Frequently Asked Questions

Is the water safe to drink in Milford, MA?
Milford has an average water safety score of 57/100 (Grade C). 3 EPA violations have been recorded. Check individual ZIP code reports for details specific to your neighborhood.
How many water violations does Milford have?
Milford water systems have a total of 3 EPA violations, including 2 health-based violations. Violations are tracked across 1 ZIP code.
Does Milford water have lead?
The average 90th-percentile lead level in Milford is 0.001 mg/L. This is below the EPA action level of 0.015 mg/L. Lead levels can vary by home — testing is recommended especially in older properties.
How does Milford compare to Massachusetts average?
Milford has an average water safety score of 57/100, which is below the Massachusetts state average of 66/100.
How many water systems serve Milford?
Milford is served by 5 public water systems across 1 ZIP code, serving approximately 30,473 people.
How much does it cost to fix water issues in Milford?
Estimated remediation costs in Milford average $3,300 per household, ranging from $2,150 to $4,700. Costs include filtration, pipe replacement, radon mitigation, and flood protection.
HomeCitiesMassachusetts → Milford, MA

Get safety alerts for Milford, Massachusetts

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.