Health Violations Found WI 1 HEALTH VIOLATION

Glenwood City Waterworks

EPA ID: WI6560120 · 1,102 people served · 3 ZIP codes

Based on the latest federal compliance data, Glenwood City Waterworks has 2 violations that the EPA has not yet closed — those outstanding findings are part of the enforcement record for a utility that delivers water to approximately 1,102 people throughout its service territory.

Data: EPA SDWIS Last verified: 2026-04-02

C · 63
Avg Safety Score
1,102
People Served
3
ZIP Codes Served
6
Violations (5yr)
Groundwater
Water Source
0.0035 mg/L
Max Lead Level
Zone 1
Radon Risk · High
3
Contaminants Flagged
$269K
Median Home Value in Service Area

Service Area Map

Coverage area for Glenwood City Waterworks Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$86,488
Median Household Income
5,264
Service Area Population
0%
Disadvantaged Population
23th
Poverty Percentile
43th
Energy Burden Percentile
63%
Pre-1986 Housing

The Glenwood City Waterworks serves a community with a median household income of $86,488 and an estimated 5,264 residents across its service area. Approximately 63% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

💧 Where Does Your Water Come From?

Groundwater

Glenwood City Waterworks's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Elevated Risk
Source Contamination Risk
10th
Wastewater Discharge Proximity
43th
Superfund Site Proximity

About 0% of homes in St. Croix County, Wisconsin rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

59 yr
Avg Pipe Age
Copper
Pipe Material
11 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 84% of expected lifespan used End of life

Detected Contaminants

How Glenwood City Waterworks compares to EPA limits

What This Means For You

Stage 2 DBP Rule at 3 mg/L exceeds the EPA maximum of mg/L.

Surface Water Treatment Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Lead and Copper Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Comparable Water Systems

Similar-sized systems in Wisconsin

Colfax Waterworks
1,102 people
B 6 violations
Strum Waterworks
1,100 people
0 violations
0 violations
Rio Waterworks
1,095 people
0 violations
Dane Waterworks
1,117 people
B 1 violation

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Flood Insurance Water Filtration
Radon Mitigation $1,200
Flood Insurance $1,200
Water Filtration $100
Total Estimated Cost $2,500

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,000

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$5,000
10 years
$10,000
20 years
$20,000

Compare: Estimated remediation cost is $2,500 (one-time) vs. $10,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Glenwood City Waterworks (EPA ID: WI6560120) is a community water system in Wisconsin that serves approximately 1,102 people from groundwater sources.

This system provides water to 3 ZIP codes across 3 communities.

Average Home Safety Score: C (63/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

1 health-based violation recorded in the past 5 years. 2 remain unresolved.

Recent Violations

Date Contaminant Type Status
July 2, 2025 Stage 2 DBP Rule Monitoring Unresolved
October 17, 2024 Stage 2 DBP Rule Monitoring Resolved
October 17, 2024 Stage 2 DBP Rule Health-based Resolved
October 17, 2024 Lead and Copper Rule Monitoring Unresolved
July 1, 2024 Surface Water Treatment Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Stage 2 DBP Rule Treatment Failure 3 Yes
Surface Water Treatment Rule Treatment Failure 2 No
Lead and Copper Rule Treatment Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
54027 0.0035 mg/L No N/A
54013 0.0017 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 2 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Glenwood City Waterworks (WI6560120) on EPA.gov.

Frequently Asked Questions

Is Glenwood City Waterworks water safe to drink?

Glenwood City Waterworks has recorded 1 health-based violation in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.

How many people does Glenwood City Waterworks serve?

Glenwood City Waterworks serves approximately 1,102 people across 3 ZIP codes in Wisconsin.

Where does Glenwood City Waterworks get its water?

The primary water source is groundwater.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
7
Galvanized — Replacement Required
294
Unknown Material
132
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2023-06-01 did not exceed the federal lead action level.
Population served: 1,102
Reported to Wisconsin

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Glenwood City Waterworks safe to drink?
Glenwood City Waterworks has a C safety grade based on 6 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Glenwood City Waterworks's water?
Detected contaminants include Stage 2 DBP Rule, Surface Water Treatment Rule, Lead and Copper Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 3 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Glenwood City Waterworks serve?
Glenwood City Waterworks serves approximately 1,102 people with drinking water across 3 ZIP codes.
What is Glenwood City Waterworks's water source?
Glenwood City Waterworks draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Glenwood City Waterworks's water?
The maximum detected lead level is 0.0035 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Glenwood City Waterworks's service area?
The Glenwood City Waterworks service area has a median household income of $86,488. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Glenwood City Waterworks get its water?
Glenwood City Waterworks's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Glenwood City Waterworks (EPA ID: WI6560120) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Wisconsin Glenwood City Waterworks

Get safety alerts for Glenwood City Waterworks, Wisconsin

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.