Health Violations Found WI 1 HEALTH VIOLATION

Bloomer Waterworks

EPA ID: WI6090448 · 3,680 people served · 3 ZIP codes

Right now, Bloomer Waterworks shows 1 EPA violation marked active and unresolved — the provider continues to supply approximately 3,680 residents while each finding awaits closure.

Data: EPA SDWIS Last verified: 2026-04-02

C · 57
Avg Safety Score
3,680
People Served
3
ZIP Codes Served
4
Violations (5yr)
Groundwater
Water Source
0.02 mg/L
Max Lead Level — Exceeds Limit
Zone 2
Radon Risk · Moderate
4
Contaminants Flagged
$231K
Median Home Value in Service Area

Service Area Map

Coverage area for Bloomer Waterworks Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$76,603
Median Household Income
47,927
Service Area Population
6%
Disadvantaged Population
43th
Poverty Percentile
70th
Energy Burden Percentile
60%
Pre-1986 Housing

The Bloomer Waterworks serves a community with a median household income of $76,603 and an estimated 47,927 residents across its service area. Approximately 60% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

💧 Where Does Your Water Come From?

Groundwater

Bloomer Waterworks's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Elevated Risk
Source Contamination Risk
23th
Wastewater Discharge Proximity
43th
Superfund Site Proximity

About 1% of homes in Chippewa County, Wisconsin rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

47 yr
Avg Pipe Age
Copper
Pipe Material
23 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 67% of expected lifespan used End of life

Detected Contaminants

How Bloomer Waterworks compares to EPA limits

What This Means For You

Stage 1 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Stage 2 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Lead and Copper Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 1 detection recorded.

State limits: PFOA: 0.02 ppt, PFOS: 0.02 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Wisconsin

Horicon Waterworks
3,682 people
C 3 violations
0 violations
Omro Waterworks
3,629 people
C 2 violations
Arcadia Waterworks
3,737 people
B 0 violations
B 4 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Lead Pipe Replacement Flood Insurance Radon Mitigation Water Filtration PFAS Treatment
Lead Pipe Replacement $1,320
Flood Insurance $800
Radon Mitigation $667
Water Filtration $200
PFAS Treatment $167
Total Estimated Cost $3,153

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

Lead Exposure — Child Lifetime Cost $10,000

Per affected child (EPA est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$5,445
10 years
$10,890
20 years
$21,780

Compare: Estimated remediation cost is $3,153 (one-time) vs. $10,890 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Bloomer Waterworks (EPA ID: WI6090448) is a community water system in Wisconsin that serves approximately 3,680 people from groundwater sources.

This system provides water to 3 ZIP codes across 3 communities.

Average Home Safety Score: C (57/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

1 health-based violation recorded in the past 5 years. 1 remains unresolved.

Recent Violations

Date Contaminant Type Status
October 17, 2024 Stage 2 DBP Rule Health-based Resolved
October 17, 2024 Lead and Copper Rule Monitoring Unresolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Stage 1 DBP Rule Treatment Failure 1 No
Stage 2 DBP Rule Treatment Failure 1 Yes
Lead and Copper Rule Treatment Failure 1 No
Consumer Confidence Report Rule Reporting Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
54724 0.02 mg/L Yes N/A
Lead exceeds EPA action level in at least one sampling location. Consider using a certified NSF/ANSI 53 or NSF/ANSI 58 filter rated for lead removal.

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by WI or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Bloomer Waterworks (WI6090448) on EPA.gov.

Frequently Asked Questions

Is Bloomer Waterworks water safe to drink?

Bloomer Waterworks has recorded 1 health-based violation in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.

How many people does Bloomer Waterworks serve?

Bloomer Waterworks serves approximately 3,680 people across 3 ZIP codes in Wisconsin.

Where does Bloomer Waterworks get its water?

The primary water source is groundwater.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
116

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
1,843
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2023-06-01 did not exceed the federal lead action level.
Reporting compliance issue flagged by EPA under Rule 2E.
Population served: 3,680
Reported to Wisconsin

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Bloomer Waterworks safe to drink?
Bloomer Waterworks has a C safety grade based on 4 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Bloomer Waterworks's water?
Detected contaminants include Stage 1 DBP Rule, Stage 2 DBP Rule, Lead and Copper Rule, Consumer Confidence Report Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 4 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Bloomer Waterworks serve?
Bloomer Waterworks serves approximately 3,680 people with drinking water across 3 ZIP codes.
What is Bloomer Waterworks's water source?
Bloomer Waterworks draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Bloomer Waterworks's water?
The maximum detected lead level is 0.02 mg/L. This exceeds the EPA action level of 0.015 mg/L. A lead-certified filter is recommended, especially for homes with young children.
What is the demographic profile of Bloomer Waterworks's service area?
The Bloomer Waterworks service area has a median household income of $76,603. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Bloomer Waterworks get its water?
Bloomer Waterworks's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Bloomer Waterworks (EPA ID: WI6090448) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Wisconsin Bloomer Waterworks

Get safety alerts for Bloomer Waterworks, Wisconsin

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Concerned about lead? Check your risk Free tool — no phone call required.