Historical Compliance Records WI

Butler Waterworks

EPA ID: WI2680191 ยท 2,181 people served ยท 2 ZIP codes

ZipCheckup's reading of EPA SDWIS for Butler Waterworks (WI2680191): 2 EPA violations in the last five years. Butler Waterworks's record shows 2 remedied violations - all cleared, currently compliant, 2,181 residents.

Data: EPA SDWIS

2,181
People Served
2
ZIP Codes Served
2
Violations (5yr)
Surface Water
Water Source
Zone 1
Radon Risk ยท High
1
Contaminants Flagged
$301K
Median Home Value in Service Area

Service Area Map

Coverage area for Butler Waterworks Source: EPA SDWIS service area boundaries.

Service area boundary

Service Area Demographics

$89,532
Median Household Income
24,128
Service Area Population
2%
Disadvantaged Population
20th
Poverty Percentile
20th
Energy Burden Percentile
79%
Pre-1986 Housing

The Butler Waterworks serves a community with a median household income of $89,532 and an estimated 24,128 residents across its service area. Approximately 79% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

๐ŸŒŠ Where Does Your Water Come From?

Surface Water

Butler Waterworks's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
30th
Wastewater Discharge Proximity
70th
Superfund Site Proximity

Superfund Proximity Note: This service area ranks in the 70th percentile nationally for proximity to Superfund (NPL) sites.

Infrastructure Risk

61 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
4 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 94% of expected lifespan used End of life

Detected Contaminants

How Butler Waterworks compares to EPA limits

What This Means For You

Surface Water Treatment Rule at 2 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 4 detections recorded.

State limits: PFOA: 0.02 ppt, PFOS: 0.02 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter โ†’

Comparable Water Systems

Similar-sized systems in Wisconsin

Schofield Waterworks
2,205 people
1 violation
Pardeeville Waterworks
2,151 people
1 violation
Cedar Grove Waterworks
2,213 people
0 violations
Cuba City Waterworks
2,141 people
2 violations
Darlington Waterworks
2,235 people
2 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation PFAS Treatment Water Filtration
Flood Insurance $1,500
Radon Mitigation $800
PFAS Treatment $250
Water Filtration $150
Total Estimated Cost $2,700

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure - Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $2,700 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Butler Waterworks (EPA ID: WI2680191) is a community water system in Wisconsin that serves approximately 2,181 people from surface water sources.

This system provides water to 2 ZIP codes across 2 communities.

Violation History

No current noncompliance in the accepted 2026Q2 snapshot. The 2 records in the 2021-2026 window are classified as resolved or archived, not current.

Status breakdown for accepted records with record years 2021-2026: 2 resolved, 0 archived, 0 addressed, and 0 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.

Recent Violations

Date Contaminant Type Status
July 1, 2022 Surface Water Treatment Rule Non-health-based Resolved
July 1, 2022 Surface Water Treatment Rule Non-health-based Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Surface Water Treatment Rule Treatment Failure 2 No

Lead & Copper

EPA Lead and Copper Rule evidence attributed directly to this water system:

Lead Level Exceeds Action Level Sample Date
0 mg/L No N/A

No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20โ€“$50 (DIY kit) ยท Professional inspection: $150โ€“$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking โ€” this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by WI or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Butler Waterworks (WI2680191) on EPA.gov.

Frequently Asked Questions

Is Butler Waterworks water safe to drink?

The accepted 2026Q2 ECHO snapshot shows no current noncompliance for Butler Waterworks; its 2 accepted 2021-2026 records are resolved or archived. Historical compliance status does not establish conditions at a specific tap.

How many people does Butler Waterworks serve?

Butler Waterworks serves approximately 2,181 people across 2 ZIP codes in Wisconsin.

Where does Butler Waterworks get its water?

The primary water source is surface water.

Frequently Asked Questions

What contaminants are in Butler Waterworks's water?
Detected contaminants include Surface Water Treatment Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Butler Waterworks serve?
Butler Waterworks serves approximately 2,181 people with drinking water across 2 ZIP codes.
What is Butler Waterworks's water source?
Butler Waterworks draws water from surface water sources. Source type affects which contaminants are most likely to be present.
What is the demographic profile of Butler Waterworks's service area?
The Butler Waterworks service area has a median household income of $89,532. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Butler Waterworks get its water?
Butler Waterworks's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

How to cite this page

APA ZipCheckup. (n.d.). Butler Waterworks (WI): 2 EPA Violations. https://zipcheckup.com/water-system/wi2680191/
BibTeX
@misc{zipcheckup-water-system-wi2680191,
  author = {{ZipCheckup}},
  title  = {{Butler Waterworks (WI): 2 EPA Violations}},
  year   = {n.d.},
  url    = {https://zipcheckup.com/water-system/wi2680191/}
}

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter โ†’

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report โ†’

3

Contact your utility

Butler Waterworks (EPA ID: WI2680191) - request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Wisconsin Butler Waterworks

Get safety alerts for Butler Waterworks, Wisconsin

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found - check filter options Free tool - no phone call required.