Health Violations Found WI 2 HEALTH VIOLATIONS

Clyman Waterworks

EPA ID: WI1140140 · 422 people served · 1 ZIP code

Clyman Waterworks carries 1 open EPA violation that remain unresolved in the federal system — approximately 422 people fall within its service area.

Data: EPA SDWIS Last verified: 2026-04-02

C · 64
Avg Safety Score
422
People Served
1
ZIP Code Served
3
Violations (5yr)
Groundwater
Water Source
0.003325 mg/L
Max Lead Level
Zone 1
Radon Risk · High
3
Contaminants Flagged
$164K
Median Home Value in Service Area

Compliance Trajectory

Stable · Risk tier: High · 57% chance of violation in next 12 months

Violations went from 1 (2021) to 1 (2024). Violation counts have remained relatively steady.

Service Area Map

Coverage area for Clyman Waterworks Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$71,071
Median Household Income
386
Service Area Population
10%
Disadvantaged Population
50th
Poverty Percentile
50th
Energy Burden Percentile
82%
Pre-1986 Housing

The Clyman Waterworks serves a community with a median household income of $71,071 and an estimated 386 residents across its service area. Approximately 82% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

💧 Where Does Your Water Come From?

Groundwater

Clyman Waterworks's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Elevated Risk
Source Contamination Risk
50th
Wastewater Discharge Proximity
50th
Superfund Site Proximity

About 2% of homes in Dodge County, Wisconsin rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

70 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
0 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 100% of expected lifespan used End of life

Detected Contaminants

How Clyman Waterworks compares to EPA limits

Chlorine residual 1 mg/L (MRDL — Maximum Residual Disinfectant Level) (25% of limit)
0 EPA Limit: 4 mg/L (MRDL — Maximum Residual Disinfectant Level)
Irritation & DBP formation at high levels; protective at normal treatment levels

What This Means For You

Stage 2 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Lead and Copper Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Chlorine residual was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Wisconsin

0 violations
North Hills Mhp
420 people
0 violations
Villa Diann Mhp
420 people
0 violations
C 3 violations
Hancock Waterworks
419 people
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Water Filtration
Radon Mitigation $1,200
Water Filtration $300
Total Estimated Cost $1,500

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$2,500
10 years
$5,000
20 years
$10,000

Compare: Estimated remediation cost is $1,500 (one-time) vs. $5,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Clyman Waterworks (EPA ID: WI1140140) is a community water system in Wisconsin that serves approximately 422 people from groundwater sources.

This system serves ZIP code 53016 in Clyman.

Average Home Safety Score: C (64/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

2 health-based violations recorded in the past 5 years. 1 remains unresolved.

Recent Violations

Date Contaminant Type Status
October 17, 2024 Stage 2 DBP Rule Health-based Resolved
October 17, 2024 Lead and Copper Rule Monitoring Unresolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Stage 2 DBP Rule Treatment Failure 1 Yes
Lead and Copper Rule Treatment Failure 1 No
Chlorine residual Disinfectant 1 Yes

Health Risk Details

Chlorine (Residual Disinfectant) (EPA limit: 4 mg/L (MRDL — Maximum Residual Disinfectant Level))

Irritation & DBP formation at high levels; protective at normal treatment levels At-risk groups: people with asthma or chemical sensitivities, kidney dialysis patients (water must be dechlorinated).

Removal methods: granular activated carbon (GAC), KDF media filter, carbon block filter. Find the right filter →

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
53016 0.003325 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Clyman Waterworks (WI1140140) on EPA.gov.

Frequently Asked Questions

Is Clyman Waterworks water safe to drink?

Clyman Waterworks has recorded 2 health-based violations in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.

How many people does Clyman Waterworks serve?

Clyman Waterworks serves approximately 422 people across 1 ZIP code in Wisconsin.

Where does Clyman Waterworks get its water?

The primary water source is groundwater.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

1
Confirmed Lead
2
Galvanized — Replacement Required
94
Unknown Material
83
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2023-06-01 did not exceed the federal lead action level.
Reporting compliance issue flagged by EPA under Rule 2E.
Population served: 422
Reported to Wisconsin

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Clyman Waterworks safe to drink?
Clyman Waterworks has a C safety grade based on 3 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Clyman Waterworks's water?
Detected contaminants include Stage 2 DBP Rule, Lead and Copper Rule, Chlorine residual. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 2 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Clyman Waterworks serve?
Clyman Waterworks serves approximately 422 people with drinking water across 1 ZIP code.
What is Clyman Waterworks's water source?
Clyman Waterworks draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Clyman Waterworks's water?
The maximum detected lead level is 0.003325 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Clyman Waterworks's service area?
The Clyman Waterworks service area has a median household income of $71,071. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Clyman Waterworks get its water?
Clyman Waterworks's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Clyman Waterworks (EPA ID: WI1140140) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Wisconsin Clyman Waterworks

Get safety alerts for Clyman Waterworks, Wisconsin

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.