Monitoring Violations UT

Park City Water System

EPA ID: UTAH22011 · 8,875 people served · 3 ZIP codes

Even though Park City Water System accumulated 3 violations over five years, all have been formally resolved — the provider currently meets EPA standards for 8,875 people.

Data: EPA SDWIS Last verified: 2026-04-02

B · 80
Avg Safety Score
8,875
People Served
3
ZIP Codes Served
3
Violations (5yr)
Surface Water
Water Source
0.0025 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
2
Contaminants Flagged
$1.4M
Median Home Value in Service Area

Service Area Map

Coverage area for Park City Water System Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$151,782
Median Household Income
28,886
Service Area Population
0%
Disadvantaged Population
20th
Poverty Percentile
20th
Energy Burden Percentile
30%
Pre-1986 Housing

The Park City Water System serves a community with a median household income of $151,782 and an estimated 28,886 residents across its service area.

🌊 Where Does Your Water Come From?

Surface Water

Park City Water System's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
90th
Wastewater Discharge Proximity
70th
Superfund Site Proximity

About 1% of homes in Summit County, Utah rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Wastewater Proximity Note: This service area ranks in the 90th percentile nationally for proximity to wastewater discharge points. Surface water sources near wastewater outfalls may face additional treatment challenges.

Superfund Proximity Note: This service area ranks in the 70th percentile nationally for proximity to Superfund (NPL) sites.

Infrastructure Risk

42 yr
Avg Pipe Age
Copper
Pipe Material
26 yr
Est. Remaining Life
Stable
Decay Status
Installed 62% of expected lifespan used End of life

Detected Contaminants

How Park City Water System compares to EPA limits

What This Means For You

Total Organic Carbon at 1 mg/L exceeds the EPA maximum of mg/L.

Stage 2 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 13 detections recorded. 4 exceed federal EPA limits (4 ppt for PFOA/PFOS).

Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Utah

C 1 violation
0 violations
Moab City
9,000 people
D 9 violations
Santa Clara City
9,000 people
B 3 violations
North Logan City
8,500 people
D 0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance PFAS Treatment Radon Mitigation
Flood Insurance $800
PFAS Treatment $567
Radon Mitigation $400
Total Estimated Cost $1,767

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $1,767 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Park City Water System (EPA ID: UTAH22011) is a community water system in Utah that serves approximately 8,875 people from surface water sources.

This system provides water to 3 ZIP codes across 1 community.

Average Home Safety Score: B (80/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

3 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
July 2, 2025 Stage 2 DBP Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Total Organic Carbon Disinfection Byproducts 1 No
Stage 2 DBP Rule Treatment Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
84060 0.0025 mg/L No N/A
84068 0.0025 mg/L No N/A
84098 0.0025 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 2 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Park City Water System (UTAH22011) on EPA.gov.

Frequently Asked Questions

Is Park City Water System water safe to drink?

Park City Water System has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Park City Water System serve?

Park City Water System serves approximately 8,875 people across 3 ZIP codes in Utah.

Where does Park City Water System get its water?

The primary water source is surface water.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
522
Detections
25
Latest sample
12/17/2024
Highest analyte
PFOS: 6.7 ppt
Analyte Max detected Current MCL Status
PFOS 6.7 ppt 10 ppt Above 2029 federal MCL
PFPeA 5.8 ppt
PFOA 4.8 ppt 10 ppt Above 2029 federal MCL
PFBS 4.3 ppt
PFHxA 4.2 ppt

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
5,436
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-01-01 did not exceed the federal lead action level.
Population served: 8,875
Reported to Utah

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

How Water Systems Appear in Rankings

Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.

Frequently Asked Questions

Is water from Park City Water System safe to drink?
Park City Water System earns a B safety grade with 3 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Park City Water System's water?
Detected contaminants include Total Organic Carbon, Stage 2 DBP Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 2 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Park City Water System serve?
Park City Water System serves approximately 8,875 people with drinking water across 3 ZIP codes.
What is Park City Water System's water source?
Park City Water System draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Park City Water System's water?
The maximum detected lead level is 0.0025 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Park City Water System's service area?
The Park City Water System service area has a median household income of $151,782. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Park City Water System get its water?
Park City Water System's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Park City Water System (EPA ID: UTAH22011) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Utah Park City Water System

Get safety alerts for Park City Water System, Utah

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.