Millville City
EPA ID: UTAH03012 · 1,900 people served · 2 ZIP codes
ZipCheckup's reading of EPA SDWIS for Millville City (UTAH03012): 6 EPA violations in the last five years. Dating back across the full five-year EPA tracking window, Millville City encountered 6 violations, each subsequently remedied and closed - today the utility meets all federal drinking water requirements for the 1,900 residents in its service area and holds no open enforcement actions.
Data: EPA SDWIS
Service Area Map
Coverage area for Millville City Source: EPA SDWIS service area boundaries.
Service area boundary
Service Area Demographics
The Millville City serves a community with a median household income of $93,875 and an estimated 10,721 residents across its service area. Approximately 43% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
💧 Where Does Your Water Come From?
Millville City's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
Infrastructure Risk
Detected Contaminants
How Millville City compares to EPA limits
What This Means For You
Gross Alpha at 2 pCi/L exceeds the EPA maximum of pCi/L. Increased cancer risk from radioactive particles. Consider reverse osmosis filtration.
Radium-226 at 2 pCi/L (combined Radium-226 & 228 ≤ 5 pCi/L) exceeds the EPA maximum of pCi/L (combined Radium-226 & 228 ≤ 5 pCi/L). Bone cancer and leukemia (known carcinogen). Consider ion exchange (water softener) filtration.
Radium-228 at 2 pCi/L (combined Radium-226 & 228 ≤ 5 pCi/L) exceeds the EPA maximum of pCi/L (combined Radium-226 & 228 ≤ 5 pCi/L). Bone cancer and leukemia (known carcinogen). Consider ion exchange (water softener) filtration.
Gross Alpha was detected in this water system. reverse osmosis filtration can reduce exposure.
Find a certified water filter →Comparable Water Systems
Similar-sized systems in Utah
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Millville City (EPA ID: UTAH03012) is a community water system in Utah that serves approximately 1,900 people from groundwater sources.
This system provides water to 2 ZIP codes across 2 communities.
Violation History
Status breakdown for accepted records with record years 2021-2026: 6 resolved, 0 archived, 0 addressed, and 0 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| April 1, 2023 | Gross Alpha | Non-health-based | Resolved |
| April 1, 2023 | Radium-226 | Non-health-based | Resolved |
| April 1, 2023 | Radium-228 | Non-health-based | Resolved |
| October 1, 2022 | Gross Alpha | Non-health-based | Resolved |
| October 1, 2022 | Radium-226 | Non-health-based | Resolved |
| October 1, 2022 | Radium-228 | Non-health-based | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Gross Alpha | Radionuclides | 2 | No |
| Radium-226 | Radionuclides | 2 | No |
| Radium-228 | Radionuclides | 2 | No |
Lead & Copper
EPA Lead and Copper Rule evidence attributed directly to this water system:
| Lead Level | Exceeds Action Level | Sample Date |
|---|---|---|
| 0.004 mg/L | No | N/A |
No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by UT or modeled from parcel and building-footprint data.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Millville City (UTAH03012) on EPA.gov.
Frequently Asked Questions
Is Millville City water safe to drink?
The accepted 2026Q2 ECHO snapshot shows no current noncompliance for Millville City; its 6 accepted 2021-2026 records are resolved or archived. Historical compliance status does not establish conditions at a specific tap.
How many people does Millville City serve?
Millville City serves approximately 1,900 people across 2 ZIP codes in Utah.
Where does Millville City get its water?
The primary water source is groundwater.
Frequently Asked Questions
How to cite this page
ZipCheckup. (n.d.). Millville City (UT): 6 EPA Violations. https://zipcheckup.com/water-system/utah03012/
@misc{zipcheckup-water-system-utah03012,
author = {{ZipCheckup}},
title = {{Millville City (UT): 6 EPA Violations}},
year = {n.d.},
url = {https://zipcheckup.com/water-system/utah03012/}
}
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Millville City (EPA ID: UTAH03012) - request the latest Consumer Confidence Report or ask about specific contaminants.