Brigham City Water System
EPA ID: UTAH02004 · 20,540 people served · 3 ZIP codes
ZipCheckup's reading of EPA SDWIS for Brigham City Water System (UTAH02004): 4 EPA violations in the last five years. Over the past five years, Brigham City Water System recorded 4 violations, all subsequently resolved through the EPA enforcement process - the supplier currently operates in good standing, with no active actions on file for its 20,540 residents.
Data: EPA SDWIS
Service Area Map
Coverage area for Brigham City Water System Source: EPA SDWIS service area boundaries.
Service area boundary - Grade C
Service Area Demographics
The Brigham City Water System serves a community with a median household income of $103,194 and an estimated 31,739 residents across its service area. Approximately 50% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
💧 Where Does Your Water Come From?
Brigham City Water System's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
Infrastructure Risk
Detected Contaminants
How Brigham City Water System compares to EPA limits
What This Means For You
Gross Alpha at 1 pCi/L exceeds the EPA maximum of pCi/L. Increased cancer risk from radioactive particles. Consider reverse osmosis filtration.
Radium-226 at 1 pCi/L (combined Radium-226 & 228 ≤ 5 pCi/L) exceeds the EPA maximum of pCi/L (combined Radium-226 & 228 ≤ 5 pCi/L). Bone cancer and leukemia (known carcinogen). Consider ion exchange (water softener) filtration.
Radium-228 at 1 pCi/L (combined Radium-226 & 228 ≤ 5 pCi/L) exceeds the EPA maximum of pCi/L (combined Radium-226 & 228 ≤ 5 pCi/L). Bone cancer and leukemia (known carcinogen). Consider ion exchange (water softener) filtration.
Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.
PFAS Detected in Service Area
PFAS ("forever chemicals") have been detected in water serving this system's area. 1 detection recorded.
Gross Alpha was detected in this water system. reverse osmosis filtration can reduce exposure.
Find a certified water filter →Comparable Water Systems
Similar-sized systems in Utah
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Brigham City Water System (EPA ID: UTAH02004) is a community water system in Utah that serves approximately 20,540 people from groundwater sources.
This system provides water to 3 ZIP codes across 3 communities.
ZIP-Area Home Safety Context: C (67/100)
This is the average Home Safety Score for 1 of 3 service-area ZIP codes with all required score domains observed. It is not a grade for the water utility.
Model 4.0.0 uses SDWIS identity plus accepted ECHO SDWA lifecycle-based water compliance, the UCMR 5 PFAS MCL screen, EPA radon zone, and annual EPA AirData AQI across three equally weighted domains. Missing required evidence suppresses the score.
Violation History
Status breakdown for accepted records with record years 2021-2026: 4 resolved, 0 archived, 0 addressed, and 0 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| July 1, 2025 | Gross Alpha | Non-health-based | Resolved |
| July 1, 2025 | Radium-226 | Non-health-based | Resolved |
| July 1, 2025 | Radium-228 | Non-health-based | Resolved |
| May 1, 2023 | Consumer Confidence Report Rule | Non-health-based | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Gross Alpha | Radionuclides | 1 | No |
| Radium-226 | Radionuclides | 1 | No |
| Radium-228 | Radionuclides | 1 | No |
| Consumer Confidence Report Rule | Reporting Failure | 1 | No |
Lead & Copper
EPA Lead and Copper Rule evidence attributed directly to this water system:
| Lead Level | Exceeds Action Level | Sample Date |
|---|---|---|
| 0.0008 mg/L | No | N/A |
No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by UT or modeled from parcel and building-footprint data.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Brigham City Water System (UTAH02004) on EPA.gov.
Frequently Asked Questions
Is Brigham City Water System water safe to drink?
The accepted 2026Q2 ECHO snapshot shows no current noncompliance for Brigham City Water System; its 4 accepted 2021-2026 records are resolved or archived. Historical compliance status does not establish conditions at a specific tap.
How many people does Brigham City Water System serve?
Brigham City Water System serves approximately 20,540 people across 3 ZIP codes in Utah.
Where does Brigham City Water System get its water?
The primary water source is groundwater.
Federal UCMR5 PFAS Monitoring: Detected
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Frequently Asked Questions
How to cite this page
ZipCheckup. (n.d.). Brigham City Water System (UT): 4 EPA Violations. https://zipcheckup.com/water-system/utah02004/
@misc{zipcheckup-water-system-utah02004,
author = {{ZipCheckup}},
title = {{Brigham City Water System (UT): 4 EPA Violations}},
year = {n.d.},
url = {https://zipcheckup.com/water-system/utah02004/}
}
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Brigham City Water System (EPA ID: UTAH02004) - request the latest Consumer Confidence Report or ask about specific contaminants.