Monitoring Violations SC

Sandy Springs Water Company Inc. (sc0420003)

EPA ID: SC0420003 · 17,311 people served · 10 ZIP codes

In the five-year tracking period, Sandy Springs Water Company Inc. (sc0420003) filed 1 violation — each has been cleared, and the utility now meets all federal standards for its 17,311 residents.

Data: EPA SDWIS Last verified: 2026-04-02

A · 89
Avg Safety Score
17,311
People Served
10
ZIP Codes Served
1
Violations (5yr)
Surface Water
Water Source
0.00086 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
1
Contaminants Flagged
$215K
Median Home Value in Service Area

Service Area Map

Coverage area for Sandy Springs Water Company Inc. (sc0420003) Source: EPA SDWIS service area boundaries.

Service area boundary — Grade A

Service Area Demographics

$64,388
Median Household Income
181,477
Service Area Population
38%
Disadvantaged Population
58th
Poverty Percentile
59th
Energy Burden Percentile
46%
Pre-1986 Housing

The Sandy Springs Water Company Inc. (sc0420003) serves a community with a median household income of $64,388 and an estimated 181,477 residents across its service area. Approximately 46% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 38% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

Sandy Springs Water Company Inc. (sc0420003)'s water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
42th
Wastewater Discharge Proximity
37th
Superfund Site Proximity

About 1% of homes in Anderson County, South Carolina rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

41 yr
Avg Pipe Age
Copper
Pipe Material
28 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 59% of expected lifespan used End of life

Detected Contaminants

How Sandy Springs Water Company Inc. (sc0420003) compares to EPA limits

What This Means For You

Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 10 detections recorded. 1 exceeds federal EPA limits (4 ppt for PFOA/PFOS).

State limits: PFOA: 0.004 ppt, PFOS: 0.004 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in South Carolina

D 0 violations
Cayce City of (3210003)
17,460 people
A 0 violations
0 violations
C 2 violations
B 0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation PFAS Treatment Lead Pipe Replacement Water Filtration
Flood Insurance $1,210
Radon Mitigation $400
PFAS Treatment $360
Lead Pipe Replacement $270
Water Filtration $60
Total Estimated Cost $2,300

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $2,300 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Sandy Springs Water Company Inc. (sc0420003) (EPA ID: SC0420003) is a community water system in South Carolina that serves approximately 17,311 people from surface water sources.

This system provides water to 10 ZIP codes across 9 communities.

Average Home Safety Score: A (89/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

1 monitoring/reporting violation recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
August 23, 2023 Consumer Confidence Report Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Consumer Confidence Report Rule Reporting Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
29656 0.00086 mg/L No N/A
29677 0.00086 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 8 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 2 additional ZIPs inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Sandy Springs Water Company Inc. (sc0420003) (SC0420003) on EPA.gov.

Frequently Asked Questions

Is Sandy Springs Water Company Inc. (sc0420003) water safe to drink?

Sandy Springs Water Company Inc. (sc0420003) has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Sandy Springs Water Company Inc. (sc0420003) serve?

Sandy Springs Water Company Inc. (sc0420003) serves approximately 17,311 people across 10 ZIP codes in South Carolina.

Where does Sandy Springs Water Company Inc. (sc0420003) get its water?

The primary water source is surface water.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Surface water
Drawn from rivers, lakes, or reservoirs.
Disinfectant used
Chlorine
Treatment chemicals reported
chlorine

Source: Sandy Springs Water Company Inc. (sc0420003) Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine

Treatment classification and chemical list sourced from Sandy Springs Water Company Inc. (sc0420003) Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
232
Detections
8
Latest sample
8/11/2025
Highest analyte
PFBS: 4 ppt
Analyte Max detected Current MCL Status
PFBS 4 ppt

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
6,386
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2023-01-01 did not exceed the federal lead action level.
Population served: 17,311
Reported to South Carolina

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

How Water Systems Appear in Rankings

Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.

Frequently Asked Questions

Is water from Sandy Springs Water Company Inc. (sc0420003) safe to drink?
Sandy Springs Water Company Inc. (sc0420003) earns a A safety grade with 1 violation in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Sandy Springs Water Company Inc. (sc0420003)'s water?
Detected contaminants include Consumer Confidence Report Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Sandy Springs Water Company Inc. (sc0420003) serve?
Sandy Springs Water Company Inc. (sc0420003) serves approximately 17,311 people with drinking water across 10 ZIP codes.
What is Sandy Springs Water Company Inc. (sc0420003)'s water source?
Sandy Springs Water Company Inc. (sc0420003) draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Sandy Springs Water Company Inc. (sc0420003)'s water?
The maximum detected lead level is 0.00086 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Sandy Springs Water Company Inc. (sc0420003)'s service area?
The Sandy Springs Water Company Inc. (sc0420003) service area has a median household income of $64,388. EPA EJScreen data classifies 38% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Sandy Springs Water Company Inc. (sc0420003) get its water?
Sandy Springs Water Company Inc. (sc0420003)'s water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Sandy Springs Water Company Inc. (sc0420003) (EPA ID: SC0420003) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems South Carolina Sandy Springs Water Company Inc. (sc0420003)

Get safety alerts for Sandy Springs Water Company Inc. (sc0420003), South Carolina

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.