Health Violations Found OK 1 HEALTH VIOLATION

Bixby Public Works Authority

EPA ID: OK3007243 · 18,750 people served · 5 ZIP codes

Tallying the federal enforcement file for Bixby Public Works Authority yields 2 open violations that have not been formally closed — each finding sits in the EPA database while the utility continues to deliver water to approximately 18,750 residents and works through the required corrective action process.

Data: EPA SDWIS Last verified: 2026-04-02

B · 76
Avg Safety Score
18,750
People Served
5
ZIP Codes Served
5
Violations (5yr)
Surface Water
Water Source
0.0014 mg/L
Max Lead Level
Zone 3
Radon Risk · Low
3
Contaminants Flagged
$250K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 2 (2022) to 31 (2025). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for Bixby Public Works Authority Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$90,134
Median Household Income
121,761
Service Area Population
100%
Disadvantaged Population
54th
Poverty Percentile
48th
Energy Burden Percentile
37%
Pre-1986 Housing

The Bixby Public Works Authority serves a community with a median household income of $90,134 and an estimated 121,761 residents across its service area.

Environmental Justice Note: 100% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

Bixby Public Works Authority's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
44th
Wastewater Discharge Proximity
36th
Superfund Site Proximity

About 1% of homes in Tulsa County, Oklahoma rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

35 yr
Avg Pipe Age
Copper
Pipe Material
34 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 51% of expected lifespan used End of life

Detected Contaminants

How Bixby Public Works Authority compares to EPA limits

Total Trihalomethanes (TTHM) 1 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.08 mg/L
Bladder & rectal cancer risk; reproductive concerns

What This Means For You

Total Trihalomethanes (TTHM) at 1 mg/L exceeds the EPA maximum of 0.08 mg/L. Bladder & rectal cancer risk; reproductive concerns. Consider granular activated carbon (GAC) filtration.

Stage 1 DBP Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Stage 2 DBP Rule at 2 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 8 detections recorded. 2 exceed federal EPA limits (4 ppt for PFOA/PFOS).

Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Total Trihalomethanes (TTHM) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Oklahoma

Altus
18,717 people
C 55 violations
Mustang
18,576 people
B 10 violations
Mcalester Pwa
18,206 people
C 39 violations
Sapulpa
19,702 people
B 11 violations
B 29 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Water Filtration PFAS Treatment
Flood Insurance $1,440
Water Filtration $360
PFAS Treatment $320
Total Estimated Cost $2,120

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,000

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$5,165
10 years
$10,330
20 years
$20,660

Compare: Estimated remediation cost is $2,120 (one-time) vs. $10,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Bixby Public Works Authority (EPA ID: OK3007243) is a community water system in Oklahoma that serves approximately 18,750 people from surface water sources.

This system provides water to 5 ZIP codes across 5 communities.

Average Home Safety Score: B (76/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

1 health-based violation recorded in the past 5 years. 2 remain unresolved.

Recent Violations

Date Contaminant Type Status
July 1, 2025 Stage 1 DBP Rule Monitoring Unresolved
October 17, 2024 Stage 2 DBP Rule Health-based Resolved
October 17, 2024 Stage 2 DBP Rule Monitoring Resolved
October 1, 2024 Stage 1 DBP Rule Monitoring Unresolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Stage 1 DBP Rule Treatment Failure 2 No
Stage 2 DBP Rule Treatment Failure 2 Yes
Total Trihalomethanes (TTHM) Disinfection Byproducts 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
74008 0.0014 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 4 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Bixby Public Works Authority (OK3007243) on EPA.gov.

Frequently Asked Questions

Is Bixby Public Works Authority water safe to drink?

Bixby Public Works Authority has recorded 1 health-based violation in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.

How many people does Bixby Public Works Authority serve?

Bixby Public Works Authority serves approximately 18,750 people across 5 ZIP codes in Oklahoma.

Where does Bixby Public Works Authority get its water?

The primary water source is surface water.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
918-366-4430
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Address
P.O. BOX 70, BIXBY OK, 74008

Contact information from BIXBY PUBLIC WORKS AUTHORITY Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Purchased from another utility
Treated water purchased wholesale from another water system.
Disinfectant used
Chloramines
Treatment chemicals reported
chloramines

Source: BIXBY PUBLIC WORKS AUTHORITY Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chloramines

Treatment classification and chemical list sourced from BIXBY PUBLIC WORKS AUTHORITY Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
116

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
20
Galvanized — Replacement Required
8
Unknown Material
11,931
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-07-01 did not exceed the federal lead action level.
Reporting compliance issue flagged by EPA under Rule 2E.
Compliance issue flagged by EPA under Rule 4G.
Population served: 18,750
Reported to Oklahoma

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Notable events and violations

This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.

Federal compliance violations on record

These entries are taken verbatim from the utility's CCR violations section. EPA defines four broad violation categories: Maximum Contaminant Level (MCL), Treatment Technique (TT), Monitoring & Reporting (M&R), and Public Notification (PN).

  • monitoring · Lead & Copper Rule
    2022-01-01 - 2024-12-31
    Missed taking samples for Lead & Copper Rule monitoring (30 samples not collected)

Violations record from BIXBY PUBLIC WORKS AUTHORITY Consumer Confidence Report.

Notable events from the utility's CCR

These bullet entries are the utility's own narration of operational, regulatory, or infrastructure events during the reporting period.

Notable events from BIXBY PUBLIC WORKS AUTHORITY Consumer Confidence Report:
  • Monitoring violations for Lead and Copper Rule sampling (30 samples missed)
  • Violation for monitoring requirements (Lead & Copper Rule) 2022-2024

ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.

How Water Systems Appear in Rankings

Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.

Frequently Asked Questions

Is water from Bixby Public Works Authority safe to drink?
Bixby Public Works Authority earns a B safety grade with 5 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Bixby Public Works Authority's water?
Detected contaminants include Total Trihalomethanes (TTHM), Stage 1 DBP Rule, Stage 2 DBP Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 3 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Bixby Public Works Authority serve?
Bixby Public Works Authority serves approximately 18,750 people with drinking water across 5 ZIP codes.
What is Bixby Public Works Authority's water source?
Bixby Public Works Authority draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Bixby Public Works Authority's water?
The maximum detected lead level is 0.0014 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Bixby Public Works Authority's service area?
The Bixby Public Works Authority service area has a median household income of $90,134. EPA EJScreen data classifies 100% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Bixby Public Works Authority get its water?
Bixby Public Works Authority's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Bixby Public Works Authority (EPA ID: OK3007243) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Oklahoma Bixby Public Works Authority

Get safety alerts for Bixby Public Works Authority, Oklahoma

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.