Meeker Public Works Authority
EPA ID: OK3004108 · 1,044 people served · 2 ZIP codes
Right now, Meeker Public Works Authority shows 1 EPA violation marked active and unresolved — the provider continues to supply approximately 1,044 residents while each finding awaits closure.
Data: EPA SDWIS Last verified: 2026-04-02
Compliance Trajectory
Worsening · Risk tier: High · 95% chance of violation in next 12 months
Violations went from 8 (2023) to 3 (2025). The pattern suggests growing compliance challenges.
Service Area Map
Coverage area for Meeker Public Works Authority Source: EPA SDWIS service area boundaries.
Service area boundary — Grade B
Service Area Demographics
The Meeker Public Works Authority serves a community with a median household income of $57,649 and an estimated 11,843 residents across its service area. Approximately 56% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
Environmental Justice Note: 100% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.
🌊 Where Does Your Water Come From?
Meeker Public Works Authority's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.
About 2% of homes in Lincoln County, Oklahoma rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Infrastructure Risk
Detected Contaminants
How Meeker Public Works Authority compares to EPA limits
What This Means For You
Total Trihalomethanes (TTHM) at 1 mg/L exceeds the EPA maximum of 0.08 mg/L. Bladder & rectal cancer risk; reproductive concerns. Consider granular activated carbon (GAC) filtration.
Consumer Confidence Report Rule at 2 mg/L exceeds the EPA maximum of mg/L.
Revised Total Coliform Rule at 2 presence exceeds the EPA maximum of presence.
Total Trihalomethanes (TTHM) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.
Find a certified water filter →Comparable Water Systems
Similar-sized systems in Oklahoma
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Meeker Public Works Authority (EPA ID: OK3004108) is a community water system in Oklahoma that serves approximately 1,044 people from surface water sources.
This system provides water to 2 ZIP codes across 2 communities.
Average Home Safety Score: B (83/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| March 1, 2025 | Revised Total Coliform Rule | Monitoring | Resolved |
| March 1, 2025 | Consumer Confidence Report Rule | Monitoring | Resolved |
| January 1, 2024 | Total Trihalomethanes (TTHM) | Monitoring | Unresolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Consumer Confidence Report Rule | Reporting Failure | 2 | No |
| Revised Total Coliform Rule | Microbiological | 2 | No |
| Total Trihalomethanes (TTHM) | Disinfection Byproducts | 1 | No |
Lead & Copper
No Lead and Copper Rule sampling data available for this water system.
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by OK or modeled from parcel and building-footprint data.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Meeker Public Works Authority (OK3004108) on EPA.gov.
Frequently Asked Questions
Is Meeker Public Works Authority water safe to drink?
Meeker Public Works Authority has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.
How many people does Meeker Public Works Authority serve?
Meeker Public Works Authority serves approximately 1,044 people across 2 ZIP codes in Oklahoma.
Where does Meeker Public Works Authority get its water?
The primary water source is surface water.
Contact Your Water Utility
Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.
Contact information from MEEKER PUBLIC WORKS AUTHORITY Consumer Confidence Report.
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Water Source & Treatment
Where this water originates and how it's treated before reaching your tap.
Source: MEEKER PUBLIC WORKS AUTHORITY Consumer Confidence Report.
ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.
Treatment regime
How this utility classifies its treatment process and what each reported treatment chemical does.
Treatment chemicals and what each one does
Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.
Treatment classification and chemical list sourced from MEEKER PUBLIC WORKS AUTHORITY Consumer Confidence Report.
Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Notable events and violations
This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.
Federal compliance violations on record
These entries are taken verbatim from the utility's CCR violations section. EPA defines four broad violation categories: Maximum Contaminant Level (MCL), Treatment Technique (TT), Monitoring & Reporting (M&R), and Public Notification (PN).
-
monitoring · DBP STAGE 22024-01-01
MONITORING, ROUTINE (DBP), MAJOR violation for failed monitoring of disinfectant by-products.
-
monitoring · DISINFECTANT BY-PRODUCT2024-01-01 to 2024-12-31
Missed one required sample for Disinfectant By-Products, 1 sample missing.
-
monitoring · ALKALINITY, TOTAL2024-09-01 to 2024-09-30
Routine monitoring for TOTAL ALKALINITY not completed by purchaser SHAWNEE MUNICIPAL AUTHORITY.
-
monitoring · CARBON, TOTAL2024-09-01 to 2024-09-30
Routine monitoring for TOTAL CARBON not completed by purchaser SHAWNEE MUNICIPAL AUTHORITY.
-
monitoring · SODIUM2024-01-01 to 2024-12-31
Routine monitoring for SODIUM not completed by purchaser SHAWNEE MUNICIPAL AUTHORITY.
Violations record from MEEKER PUBLIC WORKS AUTHORITY Consumer Confidence Report.
ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Meeker Public Works Authority (EPA ID: OK3004108) — request the latest Consumer Confidence Report or ask about specific contaminants.