Water System Report OK

Watts

EPA ID: OK3000108 · 316 people served · 3 ZIP codes

In every reporting cycle over the past five years, Watts has come through without a single EPA violation — a consistent performance across the full service population of approximately 316 residents that reflects both well-maintained infrastructure and reliable operational oversight.

Data: EPA SDWIS Last verified: 2026-04-02

C · 66
Avg Safety Score
316
People Served
3
ZIP Codes Served
0
Violations (5yr)
Surface Water
Water Source
0.01 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
0
Contaminants Flagged
$114K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 2 (2022) to 4 (2025). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for Watts Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$43,375
Median Household Income
7,315
Service Area Population
100%
Disadvantaged Population
80th
Poverty Percentile
80th
Energy Burden Percentile
54%
Pre-1986 Housing

The Watts serves a community with a median household income of $43,375 and an estimated 7,315 residents across its service area. Approximately 54% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 100% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

Watts's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
27th
Wastewater Discharge Proximity
3th
Superfund Site Proximity

About 2% of homes in Cherokee County, Oklahoma rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

47 yr
Avg Pipe Age
Copper
Pipe Material
23 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 67% of expected lifespan used End of life

Comparable Water Systems

Similar-sized systems in Oklahoma

0 violations
0 violations
C 16 violations
B 8 violations
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation Water Filtration
Flood Insurance $1,800
Radon Mitigation $400
Water Filtration $200
Total Estimated Cost $2,400

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

System Overview

WATTS (EPA ID: OK3000108) is a community water system in Oklahoma that serves approximately 316 people from surface water sources.

This system provides water to 3 ZIP codes across 3 communities.

Average Home Safety Score: C (66/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

No violations recorded — This water system has no recorded EPA violations in the past 5 years.

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
74964 0.01 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 2 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Watts (OK3000108) on EPA.gov.

Frequently Asked Questions

Is Watts water safe to drink?

Based on EPA records, Watts has no recorded violations in the past 5 years — a positive indicator of water quality management.

How many people does Watts serve?

Watts serves approximately 316 people across 3 ZIP codes in Oklahoma.

Where does Watts get its water?

The primary water source is surface water.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
918-422-5924
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Contact information from WATTS Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Purchased from another utility
Treated water purchased wholesale from another water system.
Disinfectant used
Chlorine

Source: WATTS Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment classification and chemical list sourced from WATTS Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
443
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2021-01-01 did not exceed the federal lead action level.
Population served: 316
Reported to Oklahoma

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Watts safe to drink?
Watts has a C safety grade based on 0 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
Should I use a water filter?
Watts meets EPA standards, but a water filter can reduce trace contaminants below detectable levels for added peace of mind.
How many people does Watts serve?
Watts serves approximately 316 people with drinking water across 3 ZIP codes.
What is Watts's water source?
Watts draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Watts's water?
The maximum detected lead level is 0.01 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Watts's service area?
The Watts service area has a median household income of $43,375. EPA EJScreen data classifies 100% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Watts get its water?
Watts's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Watts (EPA ID: OK3000108) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Oklahoma Watts

Get safety alerts for Watts, Oklahoma

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool — no phone call required.