Monitoring Violations OK

Beaver

EPA ID: OK2000404 · 1,570 people served · 2 ZIP codes

Looking at the EPA enforcement file for Beaver, 3 violations are listed as unresolved — those findings cover the utility's service area of approximately 1,570 people and remain open in the federal compliance system, awaiting formal corrective action documentation.

Data: EPA SDWIS Last verified: 2026-04-02

C · 65
Avg Safety Score
1,570
People Served
2
ZIP Codes Served
5
Violations (5yr)
Groundwater
Water Source
0.0016 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
4
Contaminants Flagged
$108K
Median Home Value in Service Area

Service Area Map

Coverage area for Beaver Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$53,045
Median Household Income
2,466
Service Area Population
67%
Disadvantaged Population
70th
Poverty Percentile
80th
Energy Burden Percentile
91%
Pre-1986 Housing

The Beaver serves a community with a median household income of $53,045 and an estimated 2,466 residents across its service area. Approximately 91% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 67% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

💧 Where Does Your Water Come From?

Groundwater

Beaver's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Moderate Risk
Source Contamination Risk
50th
Wastewater Discharge Proximity
20th
Superfund Site Proximity

About 0% of homes in Beaver County, Oklahoma rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

64 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
3 yr
Est. Remaining Life
Stable
Decay Status
Installed 96% of expected lifespan used End of life

Detected Contaminants

How Beaver compares to EPA limits

What This Means For You

Revised Total Coliform Rule at 2 presence exceeds the EPA maximum of presence.

Total Organic Carbon at 1 mg/L exceeds the EPA maximum of mg/L.

Total Coliform at 1 presence exceeds the EPA maximum of presence.

Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Comparable Water Systems

Similar-sized systems in Oklahoma

Garvin Company Rwd #2
1,570 people
0 violations
Stratford
1,575 people
0 violations
Rogers Company Rwd # 6
1,560 people
0 violations
Fairfax
1,555 people
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation
Flood Insurance $900
Radon Mitigation $400
Total Estimated Cost $1,300

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,000

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$5,000
10 years
$10,000
20 years
$20,000

Compare: Estimated remediation cost is $1,300 (one-time) vs. $10,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

BEAVER (EPA ID: OK2000404) is a community water system in Oklahoma that serves approximately 1,570 people from groundwater sources.

This system provides water to 2 ZIP codes across 2 communities.

Average Home Safety Score: C (65/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

5 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
February 1, 2025 Revised Total Coliform Rule Monitoring Unresolved
February 1, 2025 Consumer Confidence Report Rule Monitoring Unresolved
April 1, 2024 Total Organic Carbon Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Revised Total Coliform Rule Microbiological 2 No
Total Organic Carbon Disinfection Byproducts 1 No
Total Coliform Microbiological 1 No
Consumer Confidence Report Rule Reporting Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
73932 0.0016 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 1 ZIP code confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Beaver (OK2000404) on EPA.gov.

Frequently Asked Questions

Is Beaver water safe to drink?

Beaver has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Beaver serve?

Beaver serves approximately 1,570 people across 2 ZIP codes in Oklahoma.

Where does Beaver get its water?

The primary water source is groundwater.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
580-625-3331
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Contact information from BEAVER Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Groundwater
Drawn from underground aquifers via wells.
Disinfectant used
Chlorine
Treatment chemicals reported
chlorinechloramines

Source: BEAVER Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorinechloramines

Treatment classification and chemical list sourced from BEAVER Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
888
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2021-01-01 did not exceed the federal lead action level.
Population served: 1,570
Reported to Oklahoma

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Notable events and violations

This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.

Federal compliance violations on record

These entries are taken verbatim from the utility's CCR violations section. EPA defines four broad violation categories: Maximum Contaminant Level (MCL), Treatment Technique (TT), Monitoring & Reporting (M&R), and Public Notification (PN).

  • monitoring · VOC
    2024-04-01 to 2024-06-30
    MONITORING, ROUTINE MAJOR

Violations record from BEAVER Consumer Confidence Report.

ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.

Frequently Asked Questions

Is water from Beaver safe to drink?
Beaver has a C safety grade based on 5 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Beaver's water?
Detected contaminants include Revised Total Coliform Rule, Total Organic Carbon, Total Coliform, Consumer Confidence Report Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 4 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Beaver serve?
Beaver serves approximately 1,570 people with drinking water across 2 ZIP codes.
What is Beaver's water source?
Beaver draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Beaver's water?
The maximum detected lead level is 0.0016 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Beaver's service area?
The Beaver service area has a median household income of $53,045. EPA EJScreen data classifies 67% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Beaver get its water?
Beaver's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Beaver (EPA ID: OK2000404) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Oklahoma Beaver

Get safety alerts for Beaver, Oklahoma

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.