Historical Compliance Records OH

Marysville City Public Water System

EPA ID: OH8000314 ยท 25,571 people served ยท 6 ZIP codes

ZipCheckup's reading of EPA SDWIS for Marysville City Public Water System (OH8000314): 1 EPA violation in the last five years. Five years tracked: Marysville City Public Water System had 1 violation, all cleared, 25,571 served.

Data: EPA SDWIS

D ยท 42
Avg Safety Score
25,571
People Served
6
ZIP Codes Served
1
Violations (5yr)
Surface Water
Water Source
0.0008 mg/L
Max Lead Level
Zone 1
Radon Risk ยท High
1
Contaminants Flagged
$400K
Median Home Value in Service Area

Service Area Map

Coverage area for Marysville City Public Water System Source: EPA SDWIS service area boundaries.

Service area boundary - Grade D

Service Area Demographics

$119,857
Median Household Income
205,572
Service Area Population
16%
Disadvantaged Population
28th
Poverty Percentile
38th
Energy Burden Percentile
38%
Pre-1986 Housing

The Marysville City Public Water System serves a community with a median household income of $119,857 and an estimated 205,572 residents across its service area.

๐ŸŒŠ Where Does Your Water Come From?

Surface Water

Marysville City Public Water System's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
40th
Wastewater Discharge Proximity
38th
Superfund Site Proximity

Infrastructure Risk

34 yr
Avg Pipe Age
Copper
Pipe Material
36 yr
Est. Remaining Life
Stable
Decay Status
Installed 49% of expected lifespan used End of life

Detected Contaminants

How Marysville City Public Water System compares to EPA limits

What This Means For You

Stage 2 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 33 detections recorded. 6 exceed federal EPA limits (4 ppt for PFOA/PFOS).

State limits: PFOA: 0.012 ppt, PFOS: 0.012 ppt, PFBS: 2.1 ppt, PFHxS: 0.14 ppt, HFPO-DA: 0.7 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter โ†’

Comparable Water Systems

Similar-sized systems in Ohio

Sandusky City
25,793 people
1 violation
0 violations
C 0 violations
C 0 violations
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Flood Insurance PFAS Treatment
Radon Mitigation $1,200
Flood Insurance $1,200
PFAS Treatment $600
Total Estimated Cost $3,000

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure - Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $3,000 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Marysville City Public Water System (EPA ID: OH8000314) is a community water system in Ohio that serves approximately 25,571 people from surface water sources.

This system provides water to 6 ZIP codes across 5 communities.

ZIP-Area Home Safety Context: D (42/100)

This is the average Home Safety Score for 1 of 6 service-area ZIP codes with all required score domains observed. It is not a grade for the water utility.

Model 4.0.0 uses SDWIS identity plus accepted ECHO SDWA lifecycle-based water compliance, the UCMR 5 PFAS MCL screen, EPA radon zone, and annual EPA AirData AQI across three equally weighted domains. Missing required evidence suppresses the score.

Violation History

No current noncompliance in the accepted 2026Q2 snapshot. The 1 record in the 2021-2026 window are classified as resolved or archived, not current.

Status breakdown for accepted records with record years 2021-2026: 1 resolved, 0 archived, 0 addressed, and 0 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.

Recent Violations

Date Contaminant Type Status
July 2, 2025 Stage 2 DBP Rule Non-health-based Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Stage 2 DBP Rule Treatment Failure 1 No

Lead & Copper

EPA Lead and Copper Rule evidence attributed directly to this water system:

Lead Level Exceeds Action Level Sample Date
0.0008 mg/L No N/A

No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20โ€“$50 (DIY kit) ยท Professional inspection: $150โ€“$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking โ€” this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by OH or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Marysville City Public Water System (OH8000314) on EPA.gov.

Frequently Asked Questions

Is Marysville City Public Water System water safe to drink?

The accepted 2026Q2 ECHO snapshot shows no current noncompliance for Marysville City Public Water System; its 1 accepted 2021-2026 record are resolved or archived. Historical compliance status does not establish conditions at a specific tap.

How many people does Marysville City Public Water System serve?

Marysville City Public Water System serves approximately 25,571 people across 6 ZIP codes in Ohio.

Where does Marysville City Public Water System get its water?

The primary water source is surface water.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
87

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) โ€” per-system federal sampling, 2023โ€“2025. EPA UCMR5 monitoring program โ†’

Understand PFAS health context and filtration โ†’

Frequently Asked Questions

Is water from Marysville City Public Water System safe to drink?
Marysville City Public Water System has a D safety grade based on 1 recorded violation. Some contaminants may exceed EPA limits - independent testing is recommended.
What contaminants are in Marysville City Public Water System's water?
Detected contaminants include Stage 2 DBP Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Marysville City Public Water System serve?
Marysville City Public Water System serves approximately 25,571 people with drinking water across 6 ZIP codes.
What is Marysville City Public Water System's water source?
Marysville City Public Water System draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Marysville City Public Water System's water?
The maximum detected lead level is 0.0008 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Marysville City Public Water System's service area?
The Marysville City Public Water System service area has a median household income of $119,857. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Marysville City Public Water System get its water?
Marysville City Public Water System's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

How to cite this page

APA ZipCheckup. (n.d.). Marysville City Public Water System (OH): 1 EPA Violation. https://zipcheckup.com/water-system/oh8000314/
BibTeX
@misc{zipcheckup-water-system-oh8000314,
  author = {{ZipCheckup}},
  title  = {{Marysville City Public Water System (OH): 1 EPA Violation}},
  year   = {n.d.},
  url    = {https://zipcheckup.com/water-system/oh8000314/}
}

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter โ†’

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report โ†’

3

Contact your utility

Marysville City Public Water System (EPA ID: OH8000314) - request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Ohio Marysville City Public Water System

Get safety alerts for Marysville City Public Water System, Ohio

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found - check filter options Free tool - no phone call required.