Monitoring Violations OH

Baltimore Village Public Water System

EPA ID: OH2300112 · 2,995 people served · 1 ZIP code

In the current EPA monitoring period, Baltimore Village Public Water System has 1 violation still listed as unresolved, with the utility supplying water to approximately 2,995 residents.

Data: EPA SDWIS Last verified: 2026-04-02

D · 42
Avg Safety Score
2,995
People Served
1
ZIP Code Served
3
Violations (5yr)
Groundwater
Water Source
0.0128 mg/L
Max Lead Level
Zone 1
Radon Risk · High
1
Contaminants Flagged
$311K
Median Home Value in Service Area

Service Area Map

Coverage area for Baltimore Village Public Water System Source: EPA SDWIS service area boundaries.

Service area boundary — Grade D

Service Area Demographics

$96,824
Median Household Income
9,059
Service Area Population
32%
Disadvantaged Population
40th
Poverty Percentile
50th
Energy Burden Percentile
62%
Pre-1986 Housing

The Baltimore Village Public Water System serves a community with a median household income of $96,824 and an estimated 9,059 residents across its service area. Approximately 62% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 32% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

💧 Where Does Your Water Come From?

Groundwater

Baltimore Village Public Water System's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Moderate Risk
Source Contamination Risk
60th
Wastewater Discharge Proximity
40th
Superfund Site Proximity

About 1% of homes in Fairfield County, Ohio rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Wastewater Proximity Note: This service area ranks in the 60th percentile nationally for proximity to wastewater discharge points.

Infrastructure Risk

54 yr
Avg Pipe Age
Copper
Pipe Material
16 yr
Est. Remaining Life
Stable
Decay Status
Installed 77% of expected lifespan used End of life

Detected Contaminants

How Baltimore Village Public Water System compares to EPA limits

What This Means For You

Surface Water Treatment Rule at 3 mg/L exceeds the EPA maximum of mg/L.

Comparable Water Systems

Similar-sized systems in Ohio

0 violations
C 0 violations
C 0 violations
Minster Village
3,025 people
D 8 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation
Flood Insurance $2,500
Radon Mitigation $1,200
Total Estimated Cost $3,700

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$2,500
10 years
$5,000
20 years
$10,000

Compare: Estimated remediation cost is $3,700 (one-time) vs. $5,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Baltimore Village Public Water System (EPA ID: OH2300112) is a community water system in Ohio that serves approximately 2,995 people from groundwater sources.

This system serves ZIP code 43105 in Baltimore.

Average Home Safety Score: D (42/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

3 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
December 19, 2024 Surface Water Treatment Rule Monitoring Unresolved
July 1, 2024 Surface Water Treatment Rule Monitoring Resolved
July 1, 2023 Surface Water Treatment Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Surface Water Treatment Rule Treatment Failure 3 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
43105 0.0128 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by OH or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Baltimore Village Public Water System (OH2300112) on EPA.gov.

Frequently Asked Questions

Is Baltimore Village Public Water System water safe to drink?

Baltimore Village Public Water System has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Baltimore Village Public Water System serve?

Baltimore Village Public Water System serves approximately 2,995 people across 1 ZIP code in Ohio.

Where does Baltimore Village Public Water System get its water?

The primary water source is groundwater.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

20
Confirmed Lead
66
Galvanized — Replacement Required
775
Unknown Material
365
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-01-01 did not exceed the federal lead action level.
Population served: 2,995
Reported to Ohio

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Baltimore Village Public Water System safe to drink?
Baltimore Village Public Water System has a D safety grade based on 3 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Baltimore Village Public Water System's water?
Detected contaminants include Surface Water Treatment Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Baltimore Village Public Water System serve?
Baltimore Village Public Water System serves approximately 2,995 people with drinking water across 1 ZIP code.
What is Baltimore Village Public Water System's water source?
Baltimore Village Public Water System draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Baltimore Village Public Water System's water?
The maximum detected lead level is 0.0128 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Baltimore Village Public Water System's service area?
The Baltimore Village Public Water System service area has a median household income of $96,824. EPA EJScreen data classifies 32% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Baltimore Village Public Water System get its water?
Baltimore Village Public Water System's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Baltimore Village Public Water System (EPA ID: OH2300112) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Ohio Baltimore Village Public Water System

Get safety alerts for Baltimore Village Public Water System, Ohio

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.