Bellaire Public Water System
EPA ID: OH0700114 · 4,278 people served · 3 ZIP codes
Unlike fully compliant utilities, Bellaire Public Water System has 2 outstanding EPA violations for approximately 4,278 residents.
Data: EPA SDWIS Last verified: 2026-04-02
Service Area Map
Coverage area for Bellaire Public Water System Source: EPA SDWIS service area boundaries.
Service area boundary — Grade D
Service Area Demographics
The Bellaire Public Water System serves a community with a median household income of $49,447 and an estimated 13,160 residents across its service area. Approximately 82% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
Environmental Justice Note: 45% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.
🌊 Where Does Your Water Come From?
Bellaire Public Water System's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.
About 1% of homes in Belmont County, Ohio rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Wastewater Proximity Note: This service area ranks in the 80th percentile nationally for proximity to wastewater discharge points. Surface water sources near wastewater outfalls may face additional treatment challenges.
Superfund Proximity Note: This service area ranks in the 70th percentile nationally for proximity to Superfund (NPL) sites.
Infrastructure Risk
Detected Contaminants
How Bellaire Public Water System compares to EPA limits
What This Means For You
Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.
E. coli at 1 Zero tolerance (any positive sample triggers immediate action) exceeds the EPA maximum of Zero tolerance (any positive sample triggers immediate action). Severe GI illness; potentially fatal kidney failure in children. Consider UV disinfection (99.99%) filtration.
PFAS Detected in Service Area
PFAS ("forever chemicals") have been detected in water serving this system's area. 7 detections recorded. 2 exceed federal EPA limits (4 ppt for PFOA/PFOS).
E. coli was detected in this water system. UV disinfection (99.99%) filtration can reduce exposure.
Find a certified water filter →Comparable Water Systems
Similar-sized systems in Ohio
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Bellaire Public Water System (EPA ID: OH0700114) is a community water system in Ohio that serves approximately 4,278 people from surface water sources.
This system provides water to 3 ZIP codes across 3 communities.
Average Home Safety Score: D (47/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| April 1, 2025 | E. coli | Monitoring | Unresolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Surface Water Treatment Rule | Treatment Failure | 1 | No |
| E. coli | Microbiological | 1 | No |
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
| ZIP Code | Lead Level | Exceeds Limit | Sample Date |
|---|---|---|---|
| 43906 | 0.0007 mg/L | No | N/A |
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: 2 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Bellaire Public Water System (OH0700114) on EPA.gov.
Frequently Asked Questions
Is Bellaire Public Water System water safe to drink?
Bellaire Public Water System has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.
How many people does Bellaire Public Water System serve?
Bellaire Public Water System serves approximately 4,278 people across 3 ZIP codes in Ohio.
Where does Bellaire Public Water System get its water?
The primary water source is surface water.
Federal UCMR5 PFAS Monitoring: Detected
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Bellaire Public Water System (EPA ID: OH0700114) — request the latest Consumer Confidence Report or ask about specific contaminants.