Williamson Town Water District
EPA ID: NY5801258 · 6,600 people served · 5 ZIP codes
Williamson Town Water District carries 4 open EPA violations that remain unresolved in the federal system — approximately 6,600 people fall within its service area.
Data: EPA SDWIS Last verified: 2026-04-02
Compliance Trajectory
Worsening · Risk tier: High · 95% chance of violation in next 12 months
Violations went from 1 (2021) to 1 (2025). The pattern suggests growing compliance challenges.
Service Area Map
Coverage area for Williamson Town Water District Source: EPA SDWIS service area boundaries.
Service area boundary — Grade C
Service Area Demographics
The Williamson Town Water District serves a community with a median household income of $86,188 and an estimated 25,556 residents across its service area. Approximately 68% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
🌊 Where Does Your Water Come From?
Williamson Town Water District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.
About 2% of homes in Wayne County, New York rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Infrastructure Risk
Detected Contaminants
How Williamson Town Water District compares to EPA limits
What This Means For You
Total Trihalomethanes (TTHM) at 1 mg/L exceeds the EPA maximum of 0.08 mg/L. Bladder & rectal cancer risk; reproductive concerns. Consider granular activated carbon (GAC) filtration.
Chlorite at 2 mg/L exceeds the EPA maximum of 1 mg/L. Anemia and nervous system effects in infants and children. Consider ferrous sulfate reduction filtration.
Contaminant 2806 at 1 mg/L exceeds the EPA maximum of mg/L.
Radium-228 at 1 pCi/L (combined Radium-226 & 228 ≤ 5 pCi/L) exceeds the EPA maximum of pCi/L (combined Radium-226 & 228 ≤ 5 pCi/L). Bone cancer and leukemia (known carcinogen). Consider ion exchange (water softener) filtration.
Stage 2 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Total Trihalomethanes (TTHM) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.
Find a certified water filter →Comparable Water Systems
Similar-sized systems in New York
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
WILLIAMSON TOWN WD (EPA ID: NY5801258) is a community water system in New York that serves approximately 6,600 people from surface water sources.
This system provides water to 5 ZIP codes across 5 communities.
Average Home Safety Score: C (60/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| July 1, 2025 | Total Trihalomethanes (TTHM) | Monitoring | Unresolved |
| February 1, 2025 | Chlorite | Monitoring | Unresolved |
| January 1, 2025 | Chlorite | Monitoring | Unresolved |
| December 6, 2024 | Stage 2 DBP Rule | Monitoring | Unresolved |
| January 1, 2023 | Contaminant 2806 | Monitoring | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Chlorite | Disinfection Byproducts | 2 | No |
| Total Trihalomethanes (TTHM) | Disinfection Byproducts | 1 | No |
| Contaminant 2806 | Other Violation | 1 | No |
| Radium-228 | Radionuclides | 1 | No |
| Stage 2 DBP Rule | Treatment Failure | 1 | No |
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
| ZIP Code | Lead Level | Exceeds Limit | Sample Date |
|---|---|---|---|
| 14589 | 0.0012 mg/L | No | N/A |
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: 3 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 2 additional ZIPs inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Williamson Town Water District (NY5801258) on EPA.gov.
Frequently Asked Questions
Is Williamson Town Water District water safe to drink?
Williamson Town Water District has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.
How many people does Williamson Town Water District serve?
Williamson Town Water District serves approximately 6,600 people across 5 ZIP codes in New York.
Where does Williamson Town Water District get its water?
The primary water source is surface water.
Federal UCMR5 PFAS Monitoring: Tested Clean
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Williamson Town Water District (EPA ID: NY5801258) — request the latest Consumer Confidence Report or ask about specific contaminants.