Water System Report NY

Massapequa Water District

EPA ID: NY2902837 · 43,000 people served · 3 ZIP codes

Zero violations in five consecutive years of EPA monitoring — Massapequa Water District has held a clean track record across every reporting cycle in that span, with no enforcement activity of any kind on file for the full service population of 43,000 residents.

Data: EPA SDWIS Last verified: 2026-04-02

C · 61
Avg Safety Score
43,000
People Served
3
ZIP Codes Served
0
Violations (5yr)
Groundwater
Water Source
Zone 3
Radon Risk · Low
0
Contaminants Flagged
$625K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 3 (2023) to 6 (2024). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for Massapequa Water District Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$164,128
Median Household Income
98,776
Service Area Population
11%
Disadvantaged Population
20th
Poverty Percentile
40th
Energy Burden Percentile
93%
Pre-1986 Housing

The Massapequa Water District serves a community with a median household income of $164,128 and an estimated 98,776 residents across its service area. Approximately 93% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

💧 Where Does Your Water Come From?

Groundwater

Massapequa Water District's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Low Risk
Source Contamination Risk
10th
Wastewater Discharge Proximity
90th
Superfund Site Proximity

About 1% of homes in Nassau County, New York rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Superfund Proximity Note: This service area ranks in the 90th percentile nationally for proximity to Superfund (NPL) sites. Groundwater sources near contaminated sites may face elevated risk from industrial chemicals.

Infrastructure Risk

73 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
0 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 100% of expected lifespan used End of life

Comparable Water Systems

Similar-sized systems in New York

B 1 violation
C 3 violations
Greenlawn Water District
42,000 people
C 6 violations
A 0 violations
Freeport (v)
45,000 people
B 0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance
Flood Insurance $1,833
Total Estimated Cost $1,833

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

System Overview

Massapequa Water District (EPA ID: NY2902837) is a community water system in New York that serves approximately 43,000 people from groundwater sources.

This system provides water to 3 ZIP codes across 3 communities.

Average Home Safety Score: C (61/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

No violations recorded — This water system has no recorded EPA violations in the past 5 years.

Lead & Copper

No Lead and Copper Rule sampling data available for this water system.

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 2 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Massapequa Water District (NY2902837) on EPA.gov.

Frequently Asked Questions

Is Massapequa Water District water safe to drink?

Based on EPA records, Massapequa Water District has no recorded violations in the past 5 years — a positive indicator of water quality management.

How many people does Massapequa Water District serve?

Massapequa Water District serves approximately 43,000 people across 3 ZIP codes in New York.

Where does Massapequa Water District get its water?

The primary water source is groundwater.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
(516) 798-5266
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Address
84 Grand Avenue, Massapequa, New York 11758

Contact information from Massapequa Water District Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Groundwater
Drawn from underground aquifers via wells.
Disinfectant used
Chlorine
Treatment chemicals reported
sodium hydroxideblended polyphosphateschlorine

Source: Massapequa Water District Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from Massapequa Water District Consumer Confidence Report:
The source water assessment has rated most of the wells as having a medium high to very high susceptibility to industrial solvents and a high susceptibility to nitrates. The elevated susceptibility to industrial solvents is due primarily to point sources of contamination related to transportation routes and commercial/industrial facilities and related activities in the assessment area. The high susceptibility to nitrate contamination is attributable to residential, commercial and institutional land use and related practices in the assessment area, such as fertilizing lawns.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Multi-stage
Multiple treatment stages — typically coagulation, filtration, and disinfection. Common for surface-water systems requiring removal of particulates, microorganisms, and dissolved organic compounds before disinfection.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine
pH adjustment
Raises or lowers water acidity to protect pipes and improve treatment performance.
sodium hydroxide
Other reported chemicals
Reported by the utility but not in our annotation dictionary.
blended polyphosphates

Watershed exposure sources reported

Land-use and natural conditions identified in the utility's source-water assessment as potential contamination sources upstream of treatment.

Industrial solventsNitrates

Treatment classification and chemical list sourced from Massapequa Water District Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
522

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

1
Confirmed Lead
4
Galvanized — Replacement Required
1,600
Unknown Material
11,921
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2021-01-01 did not exceed the federal lead action level.
Population served: 43,000
Reported to New York

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Aesthetic water quality

These measurements describe the look, taste, and feel of the water this utility delivers. They are not contaminant violations — they sit alongside federal Secondary Maximum Contaminant Levels (SMCLs) which the EPA publishes as non-enforceable guidance.

pH
7.6
How acidic or basic the water is on a 0-14 scale. Drinking water is typically near neutral.
EPA secondary range: 6.5 – 8.5
Alkalinity
30.9 ppm CaCO₃
Capacity of the water to neutralize acids, expressed as calcium carbonate equivalent.
Total dissolved solids
55 ppm
Mineral content remaining after evaporation, including calcium, magnesium, sodium, and other dissolved substances.
EPA secondary MCL: 500 ppm

Aesthetic measurements from Massapequa Water District Consumer Confidence Report.

Aesthetic measurements are reported by the utility from its annual sampling. EPA Secondary MCLs are advisory thresholds — values outside them indicate aesthetic concerns such as taste or appearance, not health violations. Federal contaminant testing is shown in the sections above.

Frequently Asked Questions

Is water from Massapequa Water District safe to drink?
Massapequa Water District has a C safety grade based on 0 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
Should I use a water filter?
Massapequa Water District meets EPA standards, but a water filter can reduce trace contaminants below detectable levels for added peace of mind.
How many people does Massapequa Water District serve?
Massapequa Water District serves approximately 43,000 people with drinking water across 3 ZIP codes.
What is Massapequa Water District's water source?
Massapequa Water District draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
What is the demographic profile of Massapequa Water District's service area?
The Massapequa Water District service area has a median household income of $164,128. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Massapequa Water District get its water?
Massapequa Water District's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Massapequa Water District (EPA ID: NY2902837) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems New York Massapequa Water District

Get safety alerts for Massapequa Water District, New York

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool — no phone call required.