Health Violations Found NH 2 HEALTH VIOLATIONS

Tamworth Water Works

EPA ID: NH2311010 · 265 people served · 5 ZIP codes

Over the past five years, Tamworth Water Works recorded 7 violations, all subsequently resolved through the EPA enforcement process — the supplier currently operates in good standing, with no active actions on file for its 265 residents.

Data: EPA SDWIS Last verified: 2026-04-02

D · 44
Avg Safety Score
265
People Served
5
ZIP Codes Served
7
Violations (5yr)
Groundwater
Water Source
0.018 mg/L
Max Lead Level — Exceeds Limit
Zone 1
Radon Risk · High
5
Contaminants Flagged
$367K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 1 (2021) to 1 (2024). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for Tamworth Water Works Source: EPA SDWIS service area boundaries.

Service area boundary — Grade D

Service Area Demographics

$79,990
Median Household Income
7,212
Service Area Population
0%
Disadvantaged Population
50th
Poverty Percentile
90th
Energy Burden Percentile
72%
Pre-1986 Housing

The Tamworth Water Works serves a community with a median household income of $79,990 and an estimated 7,212 residents across its service area. Approximately 72% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

💧 Where Does Your Water Come From?

Groundwater

Tamworth Water Works's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Moderate Risk
Source Contamination Risk
0th
Wastewater Discharge Proximity
50th
Superfund Site Proximity

About 2% of homes in Carroll County, New Hampshire rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

46 yr
Avg Pipe Age
Copper
Pipe Material
24 yr
Est. Remaining Life
Stable
Decay Status
Installed 66% of expected lifespan used End of life

Detected Contaminants

How Tamworth Water Works compares to EPA limits

Nickel 1 mg/L (secondary standard: 2.0 mg/L) (25% of limit)
0 EPA Limit: 4 mg/L (secondary standard: 2.0 mg/L)
Tooth & bone damage at high levels

What This Means For You

Stage 1 DBP Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Consumer Confidence Report Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Total Coliform at 1 presence exceeds the EPA maximum of presence.

Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Nickel was detected in this water system. reverse osmosis filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in New Hampshire

Merrymeeting Mhp
265 people
0 violations
0 violations
0 violations
0 violations
Eagle Ridge Resort
270 people
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Lead Pipe Replacement Radon Mitigation Flood Insurance Water Filtration
Lead Pipe Replacement $1,476
Radon Mitigation $1,200
Flood Insurance $720
Water Filtration $180
Total Estimated Cost $3,576

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,000

Annual per household (CDC est.)

Lead Exposure — Child Lifetime Cost $10,000

Per affected child (EPA est.)

Estimated Cumulative Cost Per Household

5 years
$7,780
10 years
$15,560
20 years
$31,120

Compare: Estimated remediation cost is $3,576 (one-time) vs. $15,560 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Tamworth Water Works (EPA ID: NH2311010) is a community water system in New Hampshire that serves approximately 265 people from groundwater sources.

This system provides water to 5 ZIP codes across 5 communities.

Average Home Safety Score: D (44/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

2 health-based violations recorded in the past 5 years. All violations have been resolved.

Recent Violations

Date Contaminant Type Status
January 1, 2025 Stage 1 DBP Rule Monitoring Resolved
August 11, 2024 Total Coliform Monitoring Resolved
February 12, 2024 Consumer Confidence Report Rule Health-based Resolved
February 12, 2024 Consumer Confidence Report Rule Monitoring Resolved
July 1, 2023 Surface Water Treatment Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Stage 1 DBP Rule Treatment Failure 2 No
Consumer Confidence Report Rule Reporting Failure 2 Yes
Nickel Inorganic 1 Yes
Total Coliform Microbiological 1 No
Surface Water Treatment Rule Treatment Failure 1 No

Health Risk Details

Fluoride (EPA limit: 4 mg/L (secondary standard: 2.0 mg/L))

Tooth & bone damage at high levels At-risk groups: children under 8 during tooth development, elderly with compromised bone density, people with kidney disease.

Removal methods: reverse osmosis, activated alumina, distillation. Find the right filter →

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
03886 0.018 mg/L Yes N/A
Lead exceeds EPA action level in at least one sampling location. Consider using a certified NSF/ANSI 53 or NSF/ANSI 58 filter rated for lead removal.

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Tamworth Water Works (NH2311010) on EPA.gov.

Frequently Asked Questions

Is Tamworth Water Works water safe to drink?

Tamworth Water Works has recorded 2 health-based violations in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.

How many people does Tamworth Water Works serve?

Tamworth Water Works serves approximately 265 people across 5 ZIP codes in New Hampshire.

Where does Tamworth Water Works get its water?

The primary water source is groundwater.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
108
Unknown Material
0
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported some but not all service line types
Latest tap sample on 2013-01-01 exceeded the federal lead action level (0.015 mg/L).
Population served: 265
Reported to New Hampshire

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Tamworth Water Works safe to drink?
Tamworth Water Works has a D safety grade based on 7 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Tamworth Water Works's water?
Detected contaminants include Stage 1 DBP Rule, Consumer Confidence Report Rule, Total Coliform, Surface Water Treatment Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 4 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Tamworth Water Works serve?
Tamworth Water Works serves approximately 265 people with drinking water across 5 ZIP codes.
What is Tamworth Water Works's water source?
Tamworth Water Works draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Tamworth Water Works's water?
The maximum detected lead level is 0.018 mg/L. This exceeds the EPA action level of 0.015 mg/L. A lead-certified filter is recommended, especially for homes with young children.
What is the demographic profile of Tamworth Water Works's service area?
The Tamworth Water Works service area has a median household income of $79,990. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Tamworth Water Works get its water?
Tamworth Water Works's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Tamworth Water Works (EPA ID: NH2311010) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems New Hampshire Tamworth Water Works

Get safety alerts for Tamworth Water Works, New Hampshire

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Concerned about lead? Check your risk Free tool — no phone call required.