Monitoring Violations NH

Laconia Water Works

EPA ID: NH1281010 · 21,000 people served · 3 ZIP codes

Looking at the EPA enforcement file for Laconia Water Works, 1 violation appear in the five-year dataset, but none remain open — the utility has addressed each finding and is in current compliance, with no pending enforcement affecting the 21,000 people in its service area.

Data: EPA SDWIS Last verified: 2026-04-02

B · 81
Avg Safety Score
21,000
People Served
3
ZIP Codes Served
1
Violations (5yr)
Surface Water
Water Source
0.004 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
1
Contaminants Flagged
$348K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 2 (2021) to 1 (2023). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for Laconia Water Works Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$91,915
Median Household Income
24,791
Service Area Population
0%
Disadvantaged Population
40th
Poverty Percentile
80th
Energy Burden Percentile
64%
Pre-1986 Housing

The Laconia Water Works serves a community with a median household income of $91,915 and an estimated 24,791 residents across its service area. Approximately 64% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

🌊 Where Does Your Water Come From?

Surface Water

Laconia Water Works's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
10th
Wastewater Discharge Proximity
30th
Superfund Site Proximity

About 2% of homes in Belknap County, New Hampshire rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

44 yr
Avg Pipe Age
Copper
Pipe Material
24 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 65% of expected lifespan used End of life

Detected Contaminants

How Laconia Water Works compares to EPA limits

What This Means For You

Revised Total Coliform Rule at 1 presence exceeds the EPA maximum of presence.

Comparable Water Systems

Similar-sized systems in New Hampshire

Salem Water Department
21,000 people
C 5 violations
Derry Water Department
17,210 people
C 1 violation
B 14 violations
Hudson Water Department
16,700 people
B 1 violation
B 2 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation Water Filtration
Flood Insurance $1,200
Radon Mitigation $400
Water Filtration $100
Total Estimated Cost $1,700

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$2,500
10 years
$5,000
20 years
$10,000

Compare: Estimated remediation cost is $1,700 (one-time) vs. $5,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Laconia Water Works (EPA ID: NH1281010) is a community water system in New Hampshire that serves approximately 21,000 people from surface water sources.

This system provides water to 3 ZIP codes across 2 communities.

Average Home Safety Score: B (81/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

1 monitoring/reporting violation recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
April 1, 2024 Revised Total Coliform Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Revised Total Coliform Rule Microbiological 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
03246 0.004 mg/L No N/A
03247 0.004 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 2 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Laconia Water Works (NH1281010) on EPA.gov.

Frequently Asked Questions

Is Laconia Water Works water safe to drink?

Laconia Water Works has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Laconia Water Works serve?

Laconia Water Works serves approximately 21,000 people across 3 ZIP codes in New Hampshire.

Where does Laconia Water Works get its water?

The primary water source is surface water.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
524-0901
Address
117 Stark Street

Contact information from Laconia Water Works Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Surface water
Drawn from rivers, lakes, or reservoirs.
Disinfectant used
Chlorine
Treatment chemicals reported
Sodium HypochloriteSodium HydroxideAluminum SulfateSodium FluorideZinc Orthophosphate

Source: Laconia Water Works Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from Laconia Water Works Consumer Confidence Report:
NHDES prepared drinking water source assessment reports for all public water systems between 2000 and 2003 to assess the vulnerability of each of the state's public water supply sources. Included in the report is a map of each source water protection area, a list of potential and known contamination sources which we inspect on a tri annual basis, and a High-Medium-Low susceptibility rating for our raw water source. The ratings were low = 5, and high = 3. The three high susceptibility areas were two for MTBE detection (recreational watercraft within our wellhead protection area) and roadways within 1,000 feet of our intakes (the possibility of accidental spills).

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Multi-stage
Multiple treatment stages — typically coagulation, filtration, and disinfection. Common for surface-water systems requiring removal of particulates, microorganisms, and dissolved organic compounds before disinfection.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
Sodium Hypochlorite
pH adjustment
Raises or lowers water acidity to protect pipes and improve treatment performance.
Sodium Hydroxide
Corrosion inhibitor
Coats pipe interiors to reduce lead and copper leaching from premise plumbing.
Zinc Orthophosphate
Coagulant
Causes suspended particles to clump together so they can be removed by filtration.
Aluminum Sulfate
Fluoridation
Added at low levels per state or local public-health policy for dental health.
Sodium Fluoride

Watershed exposure sources reported

Land-use and natural conditions identified in the utility's source-water assessment as potential contamination sources upstream of treatment.

MTBE detectionRoadways within 1,000 feet of our intakes

Treatment classification and chemical list sourced from Laconia Water Works Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
116

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

PFAS Substances Detected in This System

This water system's Consumer Confidence Report disclosed the following PFAS compounds. Levels are from the utility's most recent reporting cycle.

Substance Detected level EPA limit Status
PFHxS
Perfluorohexanesulfonic acid
EPA-regulated (2024 NPDWR)
0.722 ppt 18 ppt Below EPA limit
PFNA
Perfluorononanoic acid
EPA-regulated (2024 NPDWR)
0.584 ppt 11 ppt Below EPA limit
PFOS
Perfluorooctanesulfonic acid
EPA-regulated (2024 NPDWR)
1.23 ppt 15 ppt Below EPA limit
PFOA
Perfluorooctanoic acid
EPA-regulated (2024 NPDWR)
1.67 ppt 12 ppt Below EPA limit

In April 2024, EPA finalized the first National Primary Drinking Water Regulation for six PFAS. Public water systems have until 2029 to comply. EPA — PFAS regulation overview →

Source: Consumer Confidence Report disclosed by Laconia Water Works.

ZipCheckup is not affiliated with this water utility. PFAS detection data is sourced from public Consumer Confidence Reports filed by the utility itself.

Learn more about PFAS health effects and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
53
Galvanized — Replacement Required
177
Unknown Material
0
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported some but not all service line types
Latest tap sample on 2021-01-01 did not exceed the federal lead action level.
Population served: 17,000
Reported to New Hampshire

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Aesthetic water quality

These measurements describe the look, taste, and feel of the water this utility delivers. They are not contaminant violations — they sit alongside federal Secondary Maximum Contaminant Levels (SMCLs) which the EPA publishes as non-enforceable guidance.

pH
7.98
How acidic or basic the water is on a 0-14 scale. Drinking water is typically near neutral.
EPA secondary range: 6.5 – 8.5
Fluoride
0.7 ppm
Utility adds fluoride
Measured fluoride concentration in parts per million.
EPA secondary MCL: 2.0 ppm

Aesthetic measurements from Laconia Water Works Consumer Confidence Report.

Aesthetic measurements are reported by the utility from its annual sampling. EPA Secondary MCLs are advisory thresholds — values outside them indicate aesthetic concerns such as taste or appearance, not health violations. Federal contaminant testing is shown in the sections above.

How Water Systems Appear in Rankings

Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.

Frequently Asked Questions

Is water from Laconia Water Works safe to drink?
Laconia Water Works earns a B safety grade with 1 violation in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Laconia Water Works's water?
Detected contaminants include Revised Total Coliform Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Laconia Water Works serve?
Laconia Water Works serves approximately 21,000 people with drinking water across 3 ZIP codes.
What is Laconia Water Works's water source?
Laconia Water Works draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Laconia Water Works's water?
The maximum detected lead level is 0.004 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Laconia Water Works's service area?
The Laconia Water Works service area has a median household income of $91,915. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Laconia Water Works get its water?
Laconia Water Works's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Laconia Water Works (EPA ID: NH1281010) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems New Hampshire Laconia Water Works

Get safety alerts for Laconia Water Works, New Hampshire

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.