Monitoring Violations MT

Bynum - Teton Company W & S District

EPA ID: MT0004778 · 100 people served · 1 ZIP code

The EPA enforcement database lists 1 active violation for Bynum - Teton Company W & S District — a provider that delivers drinking water to approximately 100 people and has not yet formally resolved those findings.

Data: EPA SDWIS Last verified: 2026-04-02

C · 62
Avg Safety Score
100
People Served
1
ZIP Code Served
6
Violations (5yr)
Groundwater
Water Source
0.003 mg/L
Max Lead Level
Zone 1
Radon Risk · High
3
Contaminants Flagged

Service Area Map

Coverage area for Bynum - Teton Company W & S District Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$32,083
Median Household Income
51
Service Area Population
33%
Disadvantaged Population
60th
Poverty Percentile
80th
Energy Burden Percentile
97%
Pre-1986 Housing

The Bynum - Teton Company W & S District serves a community with a median household income of $32,083 and an estimated 51 residents across its service area. Approximately 97% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 33% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

💧 Where Does Your Water Come From?

Groundwater

Bynum - Teton Company W & S District's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Moderate Risk
Source Contamination Risk
0th
Wastewater Discharge Proximity
10th
Superfund Site Proximity

About 1% of homes in Teton County, Montana rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

124 yr
Avg Pipe Age
Galvanized Steel or Lead
Pipe Material
0 yr
Est. Remaining Life
Stable
Decay Status
Installed 100% of expected lifespan used End of life

Detected Contaminants

How Bynum - Teton Company W & S District compares to EPA limits

Arsenic 1 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.01 mg/L

What This Means For You

Arsenic at 1 mg/L exceeds the EPA maximum of 0.01 mg/L.

Surface Water Treatment Rule at 3 mg/L exceeds the EPA maximum of mg/L.

Stage 1 DBP Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Comparable Water Systems

Similar-sized systems in Montana

C 10 violations
Springwater Colony
100 people
0 violations
0 violations
B 9 violations
Hilltop Colony
100 people
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation
Radon Mitigation $1,200
Total Estimated Cost $1,200

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,000

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$5,000
10 years
$10,000
20 years
$20,000

Compare: Estimated remediation cost is $1,200 (one-time) vs. $10,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Bynum - Teton Company W & S District (EPA ID: MT0004778) is a community water system in Montana that serves approximately 100 people from groundwater sources.

This system serves ZIP code 59419 in Bynum.

Average Home Safety Score: C (62/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

6 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
July 1, 2025 Surface Water Treatment Rule Monitoring Resolved
December 30, 2024 Stage 1 DBP Rule Monitoring Unresolved
October 1, 2023 Surface Water Treatment Rule Monitoring Resolved
July 1, 2023 Surface Water Treatment Rule Monitoring Resolved
January 1, 2023 Arsenic Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Surface Water Treatment Rule Treatment Failure 3 No
Stage 1 DBP Rule Treatment Failure 2 No
Arsenic Inorganic 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
59419 0.003 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Bynum - Teton Company W & S District (MT0004778) on EPA.gov.

Frequently Asked Questions

Is Bynum - Teton Company W & S District water safe to drink?

Bynum - Teton Company W & S District has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Bynum - Teton Company W & S District serve?

Bynum - Teton Company W & S District serves approximately 100 people across 1 ZIP code in Montana.

Where does Bynum - Teton Company W & S District get its water?

The primary water source is groundwater.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Contact information from BYNUM - TETON CO W & S DISTRICT Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Groundwater
Drawn from underground aquifers via wells.
Disinfectant used
Chlorine

Source: BYNUM - TETON CO W & S DISTRICT Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment classification and chemical list sourced from BYNUM - TETON CO W & S DISTRICT Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
36
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2023-01-01 did not exceed the federal lead action level.
Population served: 100
Reported to Montana

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Notable events and violations

This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.

Federal compliance violations on record

These entries are taken verbatim from the utility's CCR violations section. EPA defines four broad violation categories: Maximum Contaminant Level (MCL), Treatment Technique (TT), Monitoring & Reporting (M&R), and Public Notification (PN).

  • MCL
    2023-10-01/2024-06-28
    Failed to provide to customers an annual report that adequately informed about water quality and risks from contaminants detected.
  • MCL
    2023-07-01/2024-06-28
    Failed to provide to customers an annual report that informs about the quality of drinking water and characterizes risks from contaminants detected.
  • public notice · lead
    2024-12-30
    Failed to provide the results of lead tap water monitoring to consumers at the location water was tested, no later than 30 days after learning the results.

Violations record from BYNUM - TETON CO W & S DISTRICT Consumer Confidence Report.

ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.

Frequently Asked Questions

Is water from Bynum - Teton Company W & S District safe to drink?
Bynum - Teton Company W & S District has a C safety grade based on 6 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Bynum - Teton Company W & S District's water?
Detected contaminants include Arsenic, Surface Water Treatment Rule, Stage 1 DBP Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 3 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Bynum - Teton Company W & S District serve?
Bynum - Teton Company W & S District serves approximately 100 people with drinking water across 1 ZIP code.
What is Bynum - Teton Company W & S District's water source?
Bynum - Teton Company W & S District draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Bynum - Teton Company W & S District's water?
The maximum detected lead level is 0.003 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Bynum - Teton Company W & S District's service area?
The Bynum - Teton Company W & S District service area has a median household income of $32,083. EPA EJScreen data classifies 33% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Bynum - Teton Company W & S District get its water?
Bynum - Teton Company W & S District's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Bynum - Teton Company W & S District (EPA ID: MT0004778) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Montana Bynum - Teton Company W & S District

Get safety alerts for Bynum - Teton Company W & S District, Montana

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.