Beaverhead Jackson Water and Sewer District
EPA ID: MT0002590 · 58 people served · 3 ZIP codes
Despite the 3 historical violations in its record, Beaverhead Jackson Water and Sewer District has cleared every one and now meets EPA standards serving 58 residents.
Data: EPA SDWIS Last verified: 2026-04-02
Service Area Map
Coverage area for Beaverhead Jackson Water and Sewer District Source: EPA SDWIS service area boundaries.
Service area boundary — Grade D
Service Area Demographics
The Beaverhead Jackson Water and Sewer District serves a community with a median household income of $72,106 and an estimated 536 residents across its service area. Approximately 56% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
💧 Where Does Your Water Come From?
Beaverhead Jackson Water and Sewer District's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
About 2% of homes in Beaverhead County, Montana rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Infrastructure Risk
Detected Contaminants
How Beaverhead Jackson Water and Sewer District compares to EPA limits
What This Means For You
Stage 1 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Comparable Water Systems
Similar-sized systems in Montana
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Beaverhead Jackson Water and Sewer District (EPA ID: MT0002590) is a community water system in Montana that serves approximately 58 people from groundwater sources.
This system provides water to 3 ZIP codes across 3 communities.
Average Home Safety Score: D (46/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Stage 1 DBP Rule | Treatment Failure | 1 | No |
| Surface Water Treatment Rule | Treatment Failure | 1 | No |
| Consumer Confidence Report Rule | Reporting Failure | 1 | No |
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
| ZIP Code | Lead Level | Exceeds Limit | Sample Date |
|---|---|---|---|
| 59736 | 0.007 mg/L | No | N/A |
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Beaverhead Jackson Water and Sewer District (MT0002590) on EPA.gov.
Frequently Asked Questions
Is Beaverhead Jackson Water and Sewer District water safe to drink?
Beaverhead Jackson Water and Sewer District has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.
How many people does Beaverhead Jackson Water and Sewer District serve?
Beaverhead Jackson Water and Sewer District serves approximately 58 people across 3 ZIP codes in Montana.
Where does Beaverhead Jackson Water and Sewer District get its water?
The primary water source is groundwater.
Water Source & Treatment
Where this water originates and how it's treated before reaching your tap.
Source: BEAVERHEAD JACKSON WATER AND SEWER DIST Consumer Confidence Report.
ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Beaverhead Jackson Water and Sewer District (EPA ID: MT0002590) — request the latest Consumer Confidence Report or ask about specific contaminants.