City of Baker
EPA ID: MT0000021 · 1,858 people served · 2 ZIP codes
Within the five-year EPA monitoring span, City of Baker accumulated 10 violations — every finding has been resolved and the utility operates in full compliance today, supplying water to approximately 1,858 people without any active enforcement proceedings.
Data: EPA SDWIS Last verified: 2026-04-02
Service Area Map
Coverage area for City of Baker Source: EPA SDWIS service area boundaries.
Service area boundary — Grade D
Service Area Demographics
The City of Baker serves a community with a median household income of $67,164 and an estimated 2,411 residents across its service area. Approximately 67% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
💧 Where Does Your Water Come From?
City of Baker's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
About 2% of homes in Fallon County, Montana rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Infrastructure Risk
Detected Contaminants
How City of Baker compares to EPA limits
What This Means For You
Total Trihalomethanes (TTHM) at 1 mg/L exceeds the EPA maximum of 0.08 mg/L. Bladder & rectal cancer risk; reproductive concerns. Consider granular activated carbon (GAC) filtration.
Consumer Confidence Report Rule at 3 mg/L exceeds the EPA maximum of mg/L.
Contaminant 2959 at 2 mg/L exceeds the EPA maximum of mg/L.
Surface Water Treatment Rule at 2 mg/L exceeds the EPA maximum of mg/L.
Stage 1 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Total Trihalomethanes (TTHM) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.
Find a certified water filter →Comparable Water Systems
Similar-sized systems in Montana
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
City of Baker (EPA ID: MT0000021) is a community water system in Montana that serves approximately 1,858 people from groundwater sources.
This system provides water to 2 ZIP codes across 2 communities.
Average Home Safety Score: D (53/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| October 1, 2025 | Surface Water Treatment Rule | Monitoring | Resolved |
| July 1, 2025 | Consumer Confidence Report Rule | Monitoring | Resolved |
| December 30, 2024 | Stage 1 DBP Rule | Monitoring | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Consumer Confidence Report Rule | Reporting Failure | 3 | No |
| Contaminant 2959 | Other Violation | 2 | No |
| Surface Water Treatment Rule | Treatment Failure | 2 | No |
| Total Trihalomethanes (TTHM) | Disinfection Byproducts | 1 | No |
| Gross Beta | Radionuclides | 1 | No |
| Stage 1 DBP Rule | Treatment Failure | 1 | No |
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
| ZIP Code | Lead Level | Exceeds Limit | Sample Date |
|---|---|---|---|
| 59313 | 0.003 mg/L | No | N/A |
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Baker (MT0000021) on EPA.gov.
Frequently Asked Questions
Is City of Baker water safe to drink?
City of Baker has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.
How many people does City of Baker serve?
City of Baker serves approximately 1,858 people across 2 ZIP codes in Montana.
Where does City of Baker get its water?
The primary water source is groundwater.
Water Source & Treatment
Where this water originates and how it's treated before reaching your tap.
Source: BAKER CITY OF Consumer Confidence Report.
ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.
Treatment regime
How this utility classifies its treatment process and what each reported treatment chemical does.
Treatment classification and chemical list sourced from BAKER CITY OF Consumer Confidence Report.
Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Notable events and violations
This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.
Federal compliance violations on record
These entries are taken verbatim from the utility's CCR violations section. EPA defines four broad violation categories: Maximum Contaminant Level (MCL), Treatment Technique (TT), Monitoring & Reporting (M&R), and Public Notification (PN).
-
public notice2024-12-30
Failed to provide the results of lead tap water monitoring to the consumers at the location water was tested. These were supposed to be provided no later than 30 days after learning the results.
Violations record from BAKER CITY OF Consumer Confidence Report.
ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
City of Baker (EPA ID: MT0000021) — request the latest Consumer Confidence Report or ask about specific contaminants.