Monitoring Violations MS

City of Water Valley

EPA ID: MS0810011 · 3,380 people served · 2 ZIP codes

Tallying the federal enforcement file for City of Water Valley yields 2 open violations that have not been formally closed — each finding sits in the EPA database while the utility continues to deliver water to approximately 3,380 residents and works through the required corrective action process.

Data: EPA SDWIS Last verified: 2026-04-02

B · 76
Avg Safety Score
3,380
People Served
2
ZIP Codes Served
4
Violations (5yr)
Groundwater
Water Source
0.0017 mg/L
Max Lead Level
Zone 3
Radon Risk · Low
1
Contaminants Flagged
$177K
Median Home Value in Service Area

Service Area Map

Coverage area for City of Water Valley Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$61,884
Median Household Income
8,992
Service Area Population
65%
Disadvantaged Population
60th
Poverty Percentile
70th
Energy Burden Percentile
54%
Pre-1986 Housing

The City of Water Valley serves a community with a median household income of $61,884 and an estimated 8,992 residents across its service area. Approximately 54% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 65% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

💧 Where Does Your Water Come From?

Groundwater

City of Water Valley's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Moderate Risk
Source Contamination Risk
25th
Wastewater Discharge Proximity
20th
Superfund Site Proximity

About 1% of homes in Lafayette County, Mississippi rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

41 yr
Avg Pipe Age
Copper
Pipe Material
29 yr
Est. Remaining Life
Stable
Decay Status
Installed 59% of expected lifespan used End of life

Detected Contaminants

How City of Water Valley compares to EPA limits

Total Trihalomethanes (TTHM) 3 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.08 mg/L
Bladder & rectal cancer risk; reproductive concerns

What This Means For You

Total Trihalomethanes (TTHM) at 3 mg/L exceeds the EPA maximum of 0.08 mg/L. Bladder & rectal cancer risk; reproductive concerns. Consider granular activated carbon (GAC) filtration.

Total Trihalomethanes (TTHM) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Mississippi

City of Newton
3,373 people
B 6 violations
City of Morton
3,400 people
B 24 violations
A 2 violations
0 violations
Mooreville Richmond #3
3,419 people
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance
Flood Insurance $1,200
Total Estimated Cost $1,200

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$2,500
10 years
$5,000
20 years
$10,000

Compare: Estimated remediation cost is $1,200 (one-time) vs. $5,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

CITY OF WATER VALLEY (EPA ID: MS0810011) is a community water system in Mississippi that serves approximately 3,380 people from groundwater sources.

This system provides water to 2 ZIP codes across 2 communities.

Average Home Safety Score: B (76/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

4 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
January 1, 2024 Total Trihalomethanes (TTHM) Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Total Trihalomethanes (TTHM) Disinfection Byproducts 3 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
38965 0.0017 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 1 ZIP code confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Water Valley (MS0810011) on EPA.gov.

Frequently Asked Questions

Is City of Water Valley water safe to drink?

City of Water Valley has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does City of Water Valley serve?

City of Water Valley serves approximately 3,380 people across 2 ZIP codes in Mississippi.

Where does City of Water Valley get its water?

The primary water source is groundwater.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
6624733244
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Address
PO Box 888, Water Valley, MS 38965

Contact information from City of Water Valley Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Groundwater
Drawn from underground aquifers via wells.
Disinfectant used
Chlorine
Treatment chemicals reported
chlorine

Source: City of Water Valley Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from City of Water Valley Consumer Confidence Report:
All six wells are relatively shallow and classified as a 'Higher Risk' for contamination. The source water assessment indicates that the wells are vulnerable to contamination from surface activities, and the city encourages environmentally responsible disposal of hazardous waste.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine

Watershed exposure sources reported

Land-use and natural conditions identified in the utility's source-water assessment as potential contamination sources upstream of treatment.

AgricultureUrban stormwater runoffSeptic systemsIndustrial activityDomestic wastewater dischargesOil and gas productionMiningFarming

Treatment classification and chemical list sourced from City of Water Valley Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
174

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

1,378
Confirmed Lead
0
Galvanized — Replacement Required
33
Unknown Material
497
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2023-01-01 did not exceed the federal lead action level.
Population served: 3,380
Reported to Mississippi

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Notable events and violations

This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.

Federal compliance violations on record

These entries are taken verbatim from the utility's CCR violations section. EPA defines four broad violation categories: Maximum Contaminant Level (MCL), Treatment Technique (TT), Monitoring & Reporting (M&R), and Public Notification (PN).

  • record keeping
    2022-12-31
    Annual Report was due by 12/31/2022, but was submitted on 1/2/2023.

Violations record from City of Water Valley Consumer Confidence Report.

Notable events from the utility's CCR

These bullet entries are the utility's own narration of operational, regulatory, or infrastructure events during the reporting period.

Notable events from City of Water Valley Consumer Confidence Report:
  • Record keeping violation: Annual Report was submitted on 1/2/2023, one day after the December 31, 2022, deadline.

ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.

Frequently Asked Questions

Is water from City of Water Valley safe to drink?
City of Water Valley earns a B safety grade with 4 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in City of Water Valley's water?
Detected contaminants include Total Trihalomethanes (TTHM). Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does City of Water Valley serve?
City of Water Valley serves approximately 3,380 people with drinking water across 2 ZIP codes.
What is City of Water Valley's water source?
City of Water Valley draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in City of Water Valley's water?
The maximum detected lead level is 0.0017 mg/L. This is within EPA action level guidelines.
What is the demographic profile of City of Water Valley's service area?
The City of Water Valley service area has a median household income of $61,884. EPA EJScreen data classifies 65% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does City of Water Valley get its water?
City of Water Valley's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

City of Water Valley (EPA ID: MS0810011) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Mississippi City of Water Valley

Get safety alerts for City of Water Valley, Mississippi

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.