City of Ripley
EPA ID: MS0700008 · 11,351 people served · 6 ZIP codes
ZipCheckup's reading of EPA SDWIS for City of Ripley (MS0700008): 4 EPA violations in the last five years. Looking at the EPA enforcement file for City of Ripley, 4 violations appear in the five-year dataset, but none remain open - the utility has addressed each finding and is in current compliance, with no pending enforcement affecting the 11,351 people in its service area.
Data: EPA SDWIS
Service Area Map
Coverage area for City of Ripley Source: EPA SDWIS service area boundaries.
Service area boundary
Service Area Demographics
The City of Ripley serves a community with a median household income of $48,512 and an estimated 22,330 residents across its service area. Approximately 51% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
Environmental Justice Note: 95% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.
💧 Where Does Your Water Come From?
City of Ripley's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
Infrastructure Risk
Detected Contaminants
How City of Ripley compares to EPA limits
What This Means For You
Total Trihalomethanes (TTHM) at 1 mg/L exceeds the EPA maximum of 0.08 mg/L. Bladder & rectal cancer risk; reproductive concerns. Consider granular activated carbon (GAC) filtration.
Revised Total Coliform Rule at 2 presence exceeds the EPA maximum of presence.
Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Total Trihalomethanes (TTHM) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.
Find a certified water filter →Comparable Water Systems
Similar-sized systems in Mississippi
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
City of Ripley (EPA ID: MS0700008) is a community water system in Mississippi that serves approximately 11,351 people from groundwater sources.
This system provides water to 6 ZIP codes across 6 communities.
Violation History
Status breakdown for accepted records with record years 2021-2026: 3 resolved, 1 archived, 0 addressed, and 0 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| May 1, 2024 | Consumer Confidence Report Rule | Non-health-based | Resolved |
| April 1, 2024 | Revised Total Coliform Rule | Non-health-based | Resolved |
| April 1, 2023 | Revised Total Coliform Rule | Non-health-based | Resolved |
| January 1, 2023 | Total Trihalomethanes (TTHM) | Non-health-based | Archived |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Revised Total Coliform Rule | Microbiological | 2 | No |
| Total Trihalomethanes (TTHM) | Disinfection Byproducts | 1 | No |
| Consumer Confidence Report Rule | Reporting Failure | 1 | No |
Lead & Copper
EPA Lead and Copper Rule evidence attributed directly to this water system:
| Lead Level | Exceeds Action Level | Sample Date |
|---|---|---|
| 0.0009 mg/L | No | N/A |
No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by MS or modeled from parcel and building-footprint data.
- 38603 - Ashland
- 38610 - Blue Mountain
- 38625 - Dumas
- 38629 - Falkner
- 38663 - Ripley
- 38674 - Tiplersville
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Ripley (MS0700008) on EPA.gov.
Frequently Asked Questions
Is City of Ripley water safe to drink?
The accepted 2026Q2 ECHO snapshot shows no current noncompliance for City of Ripley; its 4 accepted 2021-2026 records are resolved or archived. Historical compliance status does not establish conditions at a specific tap.
How many people does City of Ripley serve?
City of Ripley serves approximately 11,351 people across 6 ZIP codes in Mississippi.
Where does City of Ripley get its water?
The primary water source is groundwater.
Federal UCMR5 PFAS Monitoring: Tested Clean
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Frequently Asked Questions
How to cite this page
ZipCheckup. (n.d.). City of Ripley (MS): 4 EPA Violations. https://zipcheckup.com/water-system/ms0700008/
@misc{zipcheckup-water-system-ms0700008,
author = {{ZipCheckup}},
title = {{City of Ripley (MS): 4 EPA Violations}},
year = {n.d.},
url = {https://zipcheckup.com/water-system/ms0700008/}
}
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
City of Ripley (EPA ID: MS0700008) - request the latest Consumer Confidence Report or ask about specific contaminants.