Water System Report MS

J P Utility District

EPA ID: MS0340007 · 3,839 people served · 5 ZIP codes

Unlike many utilities its size, J P Utility District carries a violation-free five-year record — no EPA notices, no MCL exceedances, serving 3,839 people.

Data: EPA SDWIS Last verified: 2026-04-02

B · 73
Avg Safety Score
3,839
People Served
5
ZIP Codes Served
0
Violations (5yr)
Groundwater
Water Source
Zone 3
Radon Risk · Low
0
Contaminants Flagged
$142K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 2 (2022) to 8 (2024). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for J P Utility District Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$59,070
Median Household Income
48,892
Service Area Population
75%
Disadvantaged Population
70th
Poverty Percentile
80th
Energy Burden Percentile
47%
Pre-1986 Housing

The J P Utility District serves a community with a median household income of $59,070 and an estimated 48,892 residents across its service area. Approximately 47% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 75% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

💧 Where Does Your Water Come From?

Groundwater

J P Utility District's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Moderate Risk
Source Contamination Risk
34th
Wastewater Discharge Proximity
2th
Superfund Site Proximity

About 2% of homes in Jones County, Mississippi rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

37 yr
Avg Pipe Age
Copper
Pipe Material
33 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 53% of expected lifespan used End of life

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 1 detection recorded. 1 exceeds federal EPA limits (4 ppt for PFOA/PFOS).

Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Mississippi

A 9 violations
A 6 violations
0 violations
Town of Byhalia
3,820 people
0 violations
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance PFAS Treatment
Flood Insurance $1,560
PFAS Treatment $120
Total Estimated Cost $1,680

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$165
10 years
$330
20 years
$660

Compare: Estimated remediation cost is $1,680 (one-time) vs. $330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

J P Utility District (EPA ID: MS0340007) is a community water system in Mississippi that serves approximately 3,839 people from groundwater sources.

This system provides water to 5 ZIP codes across 5 communities.

Average Home Safety Score: B (73/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

No violations recorded — This water system has no recorded EPA violations in the past 5 years.

Lead & Copper

No Lead and Copper Rule sampling data available for this water system.

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by MS or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for J P Utility District (MS0340007) on EPA.gov.

Frequently Asked Questions

Is J P Utility District water safe to drink?

Based on EPA records, J P Utility District has no recorded violations in the past 5 years — a positive indicator of water quality management.

How many people does J P Utility District serve?

J P Utility District serves approximately 3,839 people across 5 ZIP codes in Mississippi.

Where does J P Utility District get its water?

The primary water source is groundwater.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
601.477.3215
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Address
2280 Hwy 29 South, Ellisville, MS

Contact information from JP Utility District Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Groundwater
Drawn from underground aquifers via wells.
Disinfectant used
Chlorine
Treatment chemicals reported
chlorine

Source: JP Utility District Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from JP Utility District Consumer Confidence Report:
The source water assessment has been completed for our public water system to determine the overall susceptibility of its drinking water supply to identify potential sources of contamination. The wells for the JP Utility District have received moderate to higher rankings in terms of susceptibility to contamination.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine

Watershed exposure sources reported

Land-use and natural conditions identified in the utility's source-water assessment as potential contamination sources upstream of treatment.

AgricultureIndustrial activitySeptic systemsUrban stormwater runoffMiningFarming

Treatment classification and chemical list sourced from JP Utility District Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
290

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
1,540
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2023-01-01 did not exceed the federal lead action level.
Population served: 3,839
Reported to Mississippi

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Notable events and violations

This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.

Notable events from the utility's CCR

These bullet entries are the utility's own narration of operational, regulatory, or infrastructure events during the reporting period.

Notable events from JP Utility District Consumer Confidence Report:
  • On system #0340036, one sample tested positive for total coliform/E.coli in May 2023. Resamples were clear.

ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.

Frequently Asked Questions

Is water from J P Utility District safe to drink?
J P Utility District earns a B safety grade with 0 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
Should I use a water filter?
J P Utility District meets EPA standards, but a water filter can reduce trace contaminants below detectable levels for added peace of mind.
How many people does J P Utility District serve?
J P Utility District serves approximately 3,839 people with drinking water across 5 ZIP codes.
What is J P Utility District's water source?
J P Utility District draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
What is the demographic profile of J P Utility District's service area?
The J P Utility District service area has a median household income of $59,070. EPA EJScreen data classifies 75% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does J P Utility District get its water?
J P Utility District's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on available data, the source contamination risk is moderate.
Home Water Systems Mississippi J P Utility District

Get safety alerts for J P Utility District, Mississippi

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool — no phone call required.