Monitoring Violations MS

Pearlington Water and Sewer District

EPA ID: MS0230067 · 1,412 people served · 4 ZIP codes

Five-year compliance data for Pearlington Water and Sewer District includes 3 violations the EPA has not yet marked resolved — those open findings are part of the utility's current enforcement profile, covering a service population of approximately 1,412 residents across the area it supplies.

Data: EPA SDWIS Last verified: 2026-04-02

B · 74
Avg Safety Score
1,412
People Served
4
ZIP Codes Served
4
Violations (5yr)
Groundwater
Water Source
0.0014 mg/L
Max Lead Level
Zone 3
Radon Risk · Low
2
Contaminants Flagged
$218K
Median Home Value in Service Area

Service Area Map

Coverage area for Pearlington Water and Sewer District Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$64,804
Median Household Income
39,782
Service Area Population
47%
Disadvantaged Population
63th
Poverty Percentile
68th
Energy Burden Percentile
29%
Pre-1986 Housing

The Pearlington Water and Sewer District serves a community with a median household income of $64,804 and an estimated 39,782 residents across its service area.

Environmental Justice Note: 47% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

💧 Where Does Your Water Come From?

Groundwater

Pearlington Water and Sewer District's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Moderate Risk
Source Contamination Risk
20th
Wastewater Discharge Proximity
40th
Superfund Site Proximity

About 1% of homes in Hancock County, Mississippi rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

26 yr
Avg Pipe Age
Copper
Pipe Material
42 yr
Est. Remaining Life
Stable
Decay Status
Installed 38% of expected lifespan used End of life

Detected Contaminants

How Pearlington Water and Sewer District compares to EPA limits

What This Means For You

Consumer Confidence Report Rule at 3 mg/L exceeds the EPA maximum of mg/L.

Revised Total Coliform Rule at 1 presence exceeds the EPA maximum of presence.

Comparable Water Systems

Similar-sized systems in Mississippi

0 violations
Oak Grove Water Assn
1,405 people
0 violations
0 violations
Town of Hickory Flat
1,423 people
A 4 violations
Town of Boyle
1,400 people
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Water Filtration
Flood Insurance $2,500
Water Filtration $75
Total Estimated Cost $2,575

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$2,500
10 years
$5,000
20 years
$10,000

Compare: Estimated remediation cost is $2,575 (one-time) vs. $5,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Pearlington Water and Sewer District (EPA ID: MS0230067) is a community water system in Mississippi that serves approximately 1,412 people from groundwater sources.

This system provides water to 4 ZIP codes across 4 communities.

Average Home Safety Score: B (74/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

4 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
September 1, 2025 Consumer Confidence Report Rule Monitoring Unresolved
August 1, 2025 Consumer Confidence Report Rule Monitoring Unresolved
July 1, 2025 Consumer Confidence Report Rule Monitoring Unresolved
January 1, 2024 Revised Total Coliform Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Consumer Confidence Report Rule Reporting Failure 3 No
Revised Total Coliform Rule Microbiological 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
39572 0.0014 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by MS or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Pearlington Water and Sewer District (MS0230067) on EPA.gov.

Frequently Asked Questions

Is Pearlington Water and Sewer District water safe to drink?

Pearlington Water and Sewer District has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Pearlington Water and Sewer District serve?

Pearlington Water and Sewer District serves approximately 1,412 people across 4 ZIP codes in Mississippi.

Where does Pearlington Water and Sewer District get its water?

The primary water source is groundwater.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
228.533.0037
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Contact information from Pearlington Water and Sewer District Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Groundwater
Drawn from underground aquifers via wells.
Disinfectant used
Chlorine
Treatment chemicals reported
chlorine

Source: Pearlington Water and Sewer District Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from Pearlington Water and Sewer District Consumer Confidence Report:
The well for the Pearlington Water and Sewer District have received lower susceptibility rankings to contamination. A report containing detailed information on how the susceptibility determinations were made has been furnished to our public water system and is available for viewing upon request.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine

Watershed exposure sources reported

Land-use and natural conditions identified in the utility's source-water assessment as potential contamination sources upstream of treatment.

Sewage treatment plantsSeptic systemsLivestock operationsWildlifeUrban stormwater runoffWastewater dischargesOil and gas productionMiningFarming

Treatment classification and chemical list sourced from Pearlington Water and Sewer District Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
1
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2021-01-01 did not exceed the federal lead action level.
Population served: 1,412
Reported to Mississippi

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Pearlington Water and Sewer District safe to drink?
Pearlington Water and Sewer District earns a B safety grade with 4 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Pearlington Water and Sewer District's water?
Detected contaminants include Consumer Confidence Report Rule, Revised Total Coliform Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 2 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Pearlington Water and Sewer District serve?
Pearlington Water and Sewer District serves approximately 1,412 people with drinking water across 4 ZIP codes.
What is Pearlington Water and Sewer District's water source?
Pearlington Water and Sewer District draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Pearlington Water and Sewer District's water?
The maximum detected lead level is 0.0014 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Pearlington Water and Sewer District's service area?
The Pearlington Water and Sewer District service area has a median household income of $64,804. EPA EJScreen data classifies 47% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Pearlington Water and Sewer District get its water?
Pearlington Water and Sewer District's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Pearlington Water and Sewer District (EPA ID: MS0230067) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Mississippi Pearlington Water and Sewer District

Get safety alerts for Pearlington Water and Sewer District, Mississippi

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.