Health Violations Found MS 11 HEALTH VIOLATIONS

Clarksdale Public Utilities

EPA ID: MS0140002 · 14,903 people served · 3 ZIP codes

Five-year compliance data for Clarksdale Public Utilities includes 8 violations the EPA has not yet marked resolved — those open findings are part of the utility's current enforcement profile, covering a service population of approximately 14,903 residents across the area it supplies.

Data: EPA SDWIS Last verified: 2026-04-02

B · 77
Avg Safety Score
14,903
People Served
3
ZIP Codes Served
24
Violations (5yr)
Groundwater
Water Source
0.0022 mg/L
Max Lead Level
Zone 3
Radon Risk · Low
8
Contaminants Flagged
$90K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 8 (2022) to 5 (2025). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for Clarksdale Public Utilities Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$48,866
Median Household Income
17,215
Service Area Population
71%
Disadvantaged Population
80th
Poverty Percentile
90th
Energy Burden Percentile
66%
Pre-1986 Housing

The Clarksdale Public Utilities serves a community with a median household income of $48,866 and an estimated 17,215 residents across its service area. Approximately 66% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 71% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

💧 Where Does Your Water Come From?

Groundwater

Clarksdale Public Utilities's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Elevated Risk
Source Contamination Risk
40th
Wastewater Discharge Proximity
80th
Superfund Site Proximity

About 1% of homes in Coahoma County, Mississippi rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Superfund Proximity Note: This service area ranks in the 80th percentile nationally for proximity to Superfund (NPL) sites. Groundwater sources near contaminated sites may face elevated risk from industrial chemicals.

Infrastructure Risk

52 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
16 yr
Est. Remaining Life
Accelerating Decay
Decay Status
Installed 76% of expected lifespan used End of life

Detected Contaminants

How Clarksdale Public Utilities compares to EPA limits

Haloacetic Acids (HAA5) 10 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.06 mg/L
Cancer risk; reproductive & developmental effects
Total Trihalomethanes (TTHM) 5 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.08 mg/L
Bladder & rectal cancer risk; reproductive concerns

What This Means For You

Haloacetic Acids (HAA5) at 10 mg/L exceeds the EPA maximum of 0.06 mg/L. Cancer risk; reproductive & developmental effects. Consider granular activated carbon (GAC) filtration.

Total Trihalomethanes (TTHM) at 5 mg/L exceeds the EPA maximum of 0.08 mg/L. Bladder & rectal cancer risk; reproductive concerns. Consider granular activated carbon (GAC) filtration.

Lead and Copper Rule at 5 mg/L exceeds the EPA maximum of mg/L.

Stage 2 DBP Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Surface Water Treatment Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Haloacetic Acids (HAA5) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Mississippi

City of Corinth
15,000 people
B 4 violations
Ms State University
15,000 people
A 6 violations
City of West Point
15,062 people
C 7 violations
City of Natchez
14,520 people
B 3 violations
City of Hernando
14,457 people
A 12 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Water Filtration
Flood Insurance $1,833
Water Filtration $300
Total Estimated Cost $2,133

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,500

Annual per household (CDC est.)

Estimated Property Value Decline $4,485

5% of median home value (EPA est.)

Estimated Cumulative Cost Per Household

5 years
$9,745
10 years
$19,490
20 years
$38,980

Compare: Estimated remediation cost is $2,133 (one-time) vs. $19,490 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Clarksdale Public Utilities (EPA ID: MS0140002) is a community water system in Mississippi that serves approximately 14,903 people from groundwater sources.

This system provides water to 3 ZIP codes across 3 communities.

Average Home Safety Score: B (77/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

11 health-based violations recorded in the past 5 years. 8 remain unresolved.

Recent Violations

Date Contaminant Type Status
July 1, 2025 Revised Total Coliform Rule Monitoring Unresolved
January 1, 2025 Stage 1 DBP Rule Monitoring Unresolved
January 1, 2025 Haloacetic Acids (HAA5) Health-based Resolved
December 19, 2024 Lead and Copper Rule Monitoring Resolved
October 17, 2024 Stage 2 DBP Rule Health-based Resolved
October 17, 2024 Stage 2 DBP Rule Monitoring Resolved
October 1, 2024 Haloacetic Acids (HAA5) Health-based Resolved
October 1, 2024 Surface Water Treatment Rule Monitoring Resolved
July 1, 2024 Haloacetic Acids (HAA5) Health-based Resolved
April 1, 2024 Total Trihalomethanes (TTHM) Monitoring Resolved
February 11, 2024 Lead and Copper Rule Monitoring Resolved
January 1, 2024 Total Trihalomethanes (TTHM) Monitoring Unresolved
January 1, 2024 Copper Monitoring Resolved
October 1, 2023 Haloacetic Acids (HAA5) Health-based Unresolved
October 1, 2023 Lead and Copper Rule Monitoring Resolved
July 1, 2023 Surface Water Treatment Rule Monitoring Resolved
April 1, 2023 Total Trihalomethanes (TTHM) Monitoring Unresolved
March 10, 2023 Lead and Copper Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Haloacetic Acids (HAA5) Disinfection Byproducts 10 Yes
Total Trihalomethanes (TTHM) Disinfection Byproducts 5 No
Lead and Copper Rule Treatment Failure 5 No
Copper Inorganic 2 No
Stage 2 DBP Rule Treatment Failure 2 Yes
Surface Water Treatment Rule Treatment Failure 2 No
Stage 1 DBP Rule Treatment Failure 1 No
Revised Total Coliform Rule Microbiological 1 No

Health Risk Details

Haloacetic Acids (HAA5) (EPA limit: 0.06 mg/L)

Cancer risk; reproductive & developmental effects At-risk groups: pregnant women, infants, long-term consumers of chlorinated municipal water.

Removal methods: granular activated carbon (GAC), carbon block filter, reverse osmosis. Find the right filter →

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
38614 0.0022 mg/L No N/A
38645 0.0019 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 2 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Clarksdale Public Utilities (MS0140002) on EPA.gov.

Frequently Asked Questions

Is Clarksdale Public Utilities water safe to drink?

Clarksdale Public Utilities has recorded 11 health-based violations in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.

How many people does Clarksdale Public Utilities serve?

Clarksdale Public Utilities serves approximately 14,903 people across 3 ZIP codes in Mississippi.

Where does Clarksdale Public Utilities get its water?

The primary water source is groundwater.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
662-627-8499
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Address
416 Third Street, Clarksdale, MS 38614

Contact information from Clarksdale Public Utilities Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Groundwater
Drawn from underground aquifers via wells.
Disinfectant used
Chlorine
Treatment chemicals reported
chlorine

Source: Clarksdale Public Utilities Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from Clarksdale Public Utilities Consumer Confidence Report:
A Source Water Assessment has been completed and copies are available for review at the Clarksdale Public Utilities main office located at 416 Third Street.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine

Watershed exposure sources reported

Land-use and natural conditions identified in the utility's source-water assessment as potential contamination sources upstream of treatment.

AgricultureIndustrial activitySeptic systemsUrban stormwater runoffMiningFarmingOil and gas production

Treatment classification and chemical list sourced from Clarksdale Public Utilities Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
381

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
7,621
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2022-01-01 did not exceed the federal lead action level.
Population served: 14,903
Reported to Mississippi

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Notable events and violations

This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.

Federal compliance violations on record

These entries are taken verbatim from the utility's CCR violations section. EPA defines four broad violation categories: Maximum Contaminant Level (MCL), Treatment Technique (TT), Monitoring & Reporting (M&R), and Public Notification (PN).

  • MCL · TTHMs [Total Trihalomethanes]
    2023
    TTHM sample(s) collected during 10/01/2023 – 12/31/2023 showed our system exceeded the standard, or maximum contaminant level (MCL).
  • public notice
    3/10/2023 – 06/23/2023
    Violation of PUBLIC NOTICE RULE LINKED TO VIOLATION.

Violations record from Clarksdale Public Utilities Consumer Confidence Report.

Notable events from the utility's CCR

These bullet entries are the utility's own narration of operational, regulatory, or infrastructure events during the reporting period.

Notable events from Clarksdale Public Utilities Consumer Confidence Report:
  • Public notice for TTHM violation completed.

ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.

How Water Systems Appear in Rankings

Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.

Frequently Asked Questions

Is water from Clarksdale Public Utilities safe to drink?
Clarksdale Public Utilities earns a B safety grade with 24 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Clarksdale Public Utilities's water?
Detected contaminants include Haloacetic Acids (HAA5), Total Trihalomethanes (TTHM), Lead and Copper Rule, Stage 2 DBP Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 5 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Clarksdale Public Utilities serve?
Clarksdale Public Utilities serves approximately 14,903 people with drinking water across 3 ZIP codes.
What is Clarksdale Public Utilities's water source?
Clarksdale Public Utilities draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Clarksdale Public Utilities's water?
The maximum detected lead level is 0.0022 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Clarksdale Public Utilities's service area?
The Clarksdale Public Utilities service area has a median household income of $48,866. EPA EJScreen data classifies 71% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Clarksdale Public Utilities get its water?
Clarksdale Public Utilities's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Clarksdale Public Utilities (EPA ID: MS0140002) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Mississippi Clarksdale Public Utilities

Get safety alerts for Clarksdale Public Utilities, Mississippi

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.