Monitoring Violations MI

Taylor

EPA ID: MI0006545 · 63,409 people served · 1 ZIP code

Looking at the EPA enforcement file for Taylor, 6 violations appear in the five-year dataset, but none remain open — the utility has addressed each finding and is in current compliance, with no pending enforcement affecting the 63,409 people in its service area.

Data: EPA SDWIS Last verified: 2026-04-02

C · 57
Avg Safety Score
63,409
People Served
1
ZIP Code Served
6
Violations (5yr)
Surface Water
Water Source
0.0163 mg/L
Max Lead Level — Exceeds Limit
Zone 3
Radon Risk · Low
3
Contaminants Flagged
$141K
Median Home Value in Service Area

Service Area Map

Coverage area for Taylor Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$59,537
Median Household Income
62,405
Service Area Population
60%
Disadvantaged Population
60th
Poverty Percentile
70th
Energy Burden Percentile
86%
Pre-1986 Housing

The Taylor serves a community with a median household income of $59,537 and an estimated 62,405 residents across its service area. Approximately 86% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 60% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

Taylor's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
40th
Wastewater Discharge Proximity
50th
Superfund Site Proximity

About 1% of homes in Wayne County, Michigan rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

60 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
5 yr
Est. Remaining Life
Stable
Decay Status
Installed 92% of expected lifespan used End of life

Detected Contaminants

How Taylor compares to EPA limits

What This Means For You

Surface Water Treatment Rule at 3 mg/L exceeds the EPA maximum of mg/L.

Consumer Confidence Report Rule at 2 mg/L exceeds the EPA maximum of mg/L.

Lead and Copper Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Comparable Water Systems

Similar-sized systems in Michigan

Pontiac
63,600 people
B 0 violations
Dearborn Heights
57,774 people
B 12 violations
City of Royal Oak
57,236 people
B 3 violations
City of Novi
56,780 people
B 0 violations
Southfield
71,739 people
B 5 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Lead Pipe Replacement Flood Insurance
Lead Pipe Replacement $5,160
Flood Insurance $1,200
Total Estimated Cost $6,360

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,000

Annual per household (CDC est.)

Lead Exposure — Child Lifetime Cost $10,000

Per affected child (EPA est.)

Estimated Cumulative Cost Per Household

5 years
$7,780
10 years
$15,560
20 years
$31,120

Compare: Estimated remediation cost is $6,360 (one-time) vs. $15,560 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Taylor (EPA ID: MI0006545) is a community water system in Michigan that serves approximately 63,409 people from surface water sources.

This system serves ZIP code 48180 in Taylor.

Average Home Safety Score: C (57/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

6 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
August 26, 2023 Lead and Copper Rule Monitoring Resolved
July 1, 2023 Surface Water Treatment Rule Monitoring Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Surface Water Treatment Rule Treatment Failure 3 No
Consumer Confidence Report Rule Reporting Failure 2 No
Lead and Copper Rule Treatment Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
48180 0.0163 mg/L Yes N/A
Lead exceeds EPA action level in at least one sampling location. Consider using a certified NSF/ANSI 53 or NSF/ANSI 58 filter rated for lead removal.

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by MI or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Taylor (MI0006545) on EPA.gov.

Frequently Asked Questions

Is Taylor water safe to drink?

Taylor has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Taylor serve?

Taylor serves approximately 63,409 people across 1 ZIP code in Michigan.

Where does Taylor get its water?

The primary water source is surface water.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
(734) 374-1373
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Contact information from City of Taylor Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Surface water
Drawn from rivers, lakes, or reservoirs.
Disinfectant used
Chlorine
Treatment chemicals reported
orthophosphateschlorine

Source: City of Taylor Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from City of Taylor Consumer Confidence Report:
GLWA's Detroit River intakes are highly susceptible to potential contamination. The Southwest water treatment plant that draws water from the Detroit River has historically provided satisfactory treatment and meets drinking water standards.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine
Other reported chemicals
Reported by the utility but not in our annotation dictionary.
orthophosphates

Treatment classification and chemical list sourced from City of Taylor Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
116

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Replacement Tracker

This water utility's lead service line (LSL) replacement program is tracked from public Consumer Confidence Report filings. Email signup notifies subscribers when the utility files an updated replacement plan or progress milestone.

Get notified on replacement progress

Subscribers receive an email when this utility updates its LSL plan, files a milestone report, or adjusts replacement timelines. No marketing, no third-party sharing.

By submitting you agree to Privacy Policy. Unsubscribe anytime via the link in any email.

City of Taylor

ZipCheckup is not affiliated with this water utility. LSL replacement-program data is sourced from public CCR filings published by the utility. Subscription notifications are based on automated parsing of subsequent CCR releases.

Learn more about Lead and Copper Rule replacement requirements →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

124
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
19,381
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-01-01 exceeded the federal lead action level (0.015 mg/L).
Population served: 63,409
Reported to Michigan

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

How Water Systems Appear in Rankings

Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.

Frequently Asked Questions

Is water from Taylor safe to drink?
Taylor has a C safety grade based on 6 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Taylor's water?
Detected contaminants include Surface Water Treatment Rule, Consumer Confidence Report Rule, Lead and Copper Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 3 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Taylor serve?
Taylor serves approximately 63,409 people with drinking water across 1 ZIP code.
What is Taylor's water source?
Taylor draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Taylor's water?
The maximum detected lead level is 0.0163 mg/L. This exceeds the EPA action level of 0.015 mg/L. A lead-certified filter is recommended, especially for homes with young children.
What is the demographic profile of Taylor's service area?
The Taylor service area has a median household income of $59,537. EPA EJScreen data classifies 60% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Taylor get its water?
Taylor's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Taylor (EPA ID: MI0006545) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Michigan Taylor

Get safety alerts for Taylor, Michigan

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Concerned about lead? Check your risk Free tool — no phone call required.