Water System Report MI

Berkley

EPA ID: MI0000630 · 14,970 people served · 2 ZIP codes

In the most recent five-year monitoring window, Berkley posted zero EPA violations serving 14,970 residents.

Data: EPA SDWIS Last verified: 2026-04-02

B · 79
Avg Safety Score
14,970
People Served
2
ZIP Codes Served
0
Violations (5yr)
Surface Water
Water Source
0.0067 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
0
Contaminants Flagged
$296K
Median Home Value in Service Area

Service Area Map

Coverage area for Berkley Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$99,765
Median Household Income
48,511
Service Area Population
10%
Disadvantaged Population
30th
Poverty Percentile
30th
Energy Burden Percentile
91%
Pre-1986 Housing

The Berkley serves a community with a median household income of $99,765 and an estimated 48,511 residents across its service area. Approximately 91% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

🌊 Where Does Your Water Come From?

Surface Water

Berkley's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
20th
Wastewater Discharge Proximity
50th
Superfund Site Proximity

About 1% of homes in Oakland County, Michigan rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

80 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
0 yr
Est. Remaining Life
Stable
Decay Status
Installed 100% of expected lifespan used End of life

Comparable Water Systems

Similar-sized systems in Michigan

Grand Haven Township
15,051 people
A 4 violations
Traverse City
14,532 people
B 1 violation
City of Fraser
14,297 people
A 2 violations
Harper Woods
14,236 people
B 4 violations
Niles
14,215 people
A 7 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation
Flood Insurance $1,200
Radon Mitigation $200
Total Estimated Cost $1,400

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

System Overview

Berkley (EPA ID: MI0000630) is a community water system in Michigan that serves approximately 14,970 people from surface water sources.

This system provides water to 2 ZIP codes across 2 communities.

Average Home Safety Score: B (79/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

No violations recorded — This water system has no recorded EPA violations in the past 5 years.

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
48072 0.0067 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by MI or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Berkley (MI0000630) on EPA.gov.

Frequently Asked Questions

Is Berkley water safe to drink?

Based on EPA records, Berkley has no recorded violations in the past 5 years — a positive indicator of water quality management.

How many people does Berkley serve?

Berkley serves approximately 14,970 people across 2 ZIP codes in Michigan.

Where does Berkley get its water?

The primary water source is surface water.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
(248) 658-3490
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Contact information from City of Berkley Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Surface water
Drawn from rivers, lakes, or reservoirs.
Disinfectant used
Chlorine
Treatment chemicals reported
chlorine

Source: City of Berkley Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Source water assessment from City of Berkley Consumer Confidence Report:
The Detroit River intakes are highly susceptible to potential contamination per a 2004 assessment by Michigan DEQ, USGS, Detroit Water and Sewerage Department, and Michigan Public Health Institute. The Lake Huron source water intake is categorized as having a moderately low susceptibility to potential contaminant sources. GLWA has historically provided satisfactory treatment and meets drinking water standards.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine

Watershed exposure sources reported

Land-use and natural conditions identified in the utility's source-water assessment as potential contamination sources upstream of treatment.

Chemical containment issuesSpillsStormwater runoffAgricultureSewage systemsUrban stormwater runoffIndustrial dischargeMiningOil and gas production

Treatment classification and chemical list sourced from City of Berkley Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
116

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Replacement Tracker

This water utility's lead service line (LSL) replacement program is tracked from public Consumer Confidence Report filings. Email signup notifies subscribers when the utility files an updated replacement plan or progress milestone.

Get notified on replacement progress

Subscribers receive an email when this utility updates its LSL plan, files a milestone report, or adjusts replacement timelines. No marketing, no third-party sharing.

By submitting you agree to Privacy Policy. Unsubscribe anytime via the link in any email.

City of Berkley

ZipCheckup is not affiliated with this water utility. LSL replacement-program data is sourced from public CCR filings published by the utility. Subscription notifications are based on automated parsing of subsequent CCR releases.

Learn more about Lead and Copper Rule replacement requirements →

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

97
Confirmed Lead
2
Galvanized — Replacement Required
5,684
Unknown Material
1,125
Confirmed Non-Lead

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-01-01 did not exceed the federal lead action level.
Population served: 14,970
Reported to Michigan

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Aesthetic water quality

These measurements describe the look, taste, and feel of the water this utility delivers. They are not contaminant violations — they sit alongside federal Secondary Maximum Contaminant Levels (SMCLs) which the EPA publishes as non-enforceable guidance.

pH
7.15
How acidic or basic the water is on a 0-14 scale. Drinking water is typically near neutral.
EPA secondary range: 6.5 – 8.5
Fluoride
0.54 ppm
Utility adds fluoride
Measured fluoride concentration in parts per million.
EPA secondary MCL: 2.0 ppm
Alkalinity
73 ppm CaCO₃
Capacity of the water to neutralize acids, expressed as calcium carbonate equivalent.
Total dissolved solids
136 ppm
Mineral content remaining after evaporation, including calcium, magnesium, sodium, and other dissolved substances.
EPA secondary MCL: 500 ppm

Aesthetic measurements from City of Berkley Consumer Confidence Report.

Aesthetic measurements are reported by the utility from its annual sampling. EPA Secondary MCLs are advisory thresholds — values outside them indicate aesthetic concerns such as taste or appearance, not health violations. Federal contaminant testing is shown in the sections above.

Notable events and violations

This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.

Federal compliance violations on record

These entries are taken verbatim from the utility's CCR violations section. EPA defines four broad violation categories: Maximum Contaminant Level (MCL), Treatment Technique (TT), Monitoring & Reporting (M&R), and Public Notification (PN).

  • monitoring · turbidity (filter monitoring)
    2024-09-02
    GLWA did not monitor individual filter turbidity for five hours due to power interruption at Springwells Water Treatment Plant on 2024-09-02.

Violations record from City of Berkley Consumer Confidence Report.

Notable events from the utility's CCR

These bullet entries are the utility's own narration of operational, regulatory, or infrastructure events during the reporting period.

Notable events from City of Berkley Consumer Confidence Report:
  • Individual filter turbidity monitoring not performed for 5 hours on 2024-09-02 due to power interruption at GLWA Springwells Water Treatment Plant

ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.

Frequently Asked Questions

Is water from Berkley safe to drink?
Berkley earns a B safety grade with 0 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
Should I use a water filter?
Berkley meets EPA standards, but a water filter can reduce trace contaminants below detectable levels for added peace of mind.
How many people does Berkley serve?
Berkley serves approximately 14,970 people with drinking water across 2 ZIP codes.
What is Berkley's water source?
Berkley draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Berkley's water?
The maximum detected lead level is 0.0067 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Berkley's service area?
The Berkley service area has a median household income of $99,765. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Berkley get its water?
Berkley's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.
Home Water Systems Michigan Berkley

Get safety alerts for Berkley, Michigan

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool — no phone call required.