Health Violations Found ME 1 HEALTH VIOLATION

Guilford-sangerville Utilities District

EPA ID: ME0090640 · 1,535 people served · 3 ZIP codes

Unlike fully compliant utilities, Guilford-sangerville Utilities District has 3 outstanding EPA violations for approximately 1,535 residents.

Data: EPA SDWIS Last verified: 2026-04-02

C · 59
Avg Safety Score
1,535
People Served
3
ZIP Codes Served
8
Violations (5yr)
Groundwater
Water Source
0.0025 mg/L
Max Lead Level
Zone 1
Radon Risk · High
7
Contaminants Flagged
$146K
Median Home Value in Service Area

Service Area Map

Coverage area for Guilford-sangerville Utilities District Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$49,432
Median Household Income
8,230
Service Area Population
88%
Disadvantaged Population
70th
Poverty Percentile
100th
Energy Burden Percentile
69%
Pre-1986 Housing

The Guilford-sangerville Utilities District serves a community with a median household income of $49,432 and an estimated 8,230 residents across its service area. Approximately 69% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 88% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

💧 Where Does Your Water Come From?

Groundwater

Guilford-sangerville Utilities District's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Elevated Risk
Source Contamination Risk
0th
Wastewater Discharge Proximity
30th
Superfund Site Proximity

About 2% of homes in Piscataquis County, Maine rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

51 yr
Avg Pipe Age
Copper
Pipe Material
19 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 73% of expected lifespan used End of life

Detected Contaminants

How Guilford-sangerville Utilities District compares to EPA limits

Total Trihalomethanes (TTHM) 1 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.08 mg/L
Bladder & rectal cancer risk; reproductive concerns

What This Means For You

Total Trihalomethanes (TTHM) at 1 mg/L exceeds the EPA maximum of 0.08 mg/L. Bladder & rectal cancer risk; reproductive concerns. Consider granular activated carbon (GAC) filtration.

Stage 1 DBP Rule at 3 mg/L exceeds the EPA maximum of mg/L.

Contaminant 1927 at 1 mg/L exceeds the EPA maximum of mg/L.

Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Lead and Copper Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Total Trihalomethanes (TTHM) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Maine

C 11 violations
D 16 violations
D 20 violations
C 10 violations
C 10 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Flood Insurance Water Filtration
Radon Mitigation $1,200
Flood Insurance $1,000
Water Filtration $100
Total Estimated Cost $2,300

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,000

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$5,000
10 years
$10,000
20 years
$20,000

Compare: Estimated remediation cost is $2,300 (one-time) vs. $10,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

GUILFORD-SANGERVILLE UTILITIES DISTRICT (EPA ID: ME0090640) is a community water system in Maine that serves approximately 1,535 people from groundwater sources.

This system provides water to 3 ZIP codes across 3 communities.

Average Home Safety Score: C (59/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

1 health-based violation recorded in the past 5 years. 3 remain unresolved.

Recent Violations

Date Contaminant Type Status
April 23, 2025 Lead and Copper Rule Monitoring Resolved
January 1, 2025 Consumer Confidence Report Rule Monitoring Resolved
January 1, 2025 Barium Monitoring Resolved
July 1, 2024 Contaminant 1927 Monitoring Unresolved
January 1, 2024 Stage 1 DBP Rule Health-based Resolved
December 30, 2023 Stage 1 DBP Rule Monitoring Resolved
July 1, 2023 Stage 1 DBP Rule Monitoring Resolved
January 1, 2023 Total Trihalomethanes (TTHM) Monitoring Unresolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Stage 1 DBP Rule Treatment Failure 3 Yes
Barium Inorganic 1 No
Contaminant 1927 Other Violation 1 No
Total Trihalomethanes (TTHM) Disinfection Byproducts 1 No
Surface Water Treatment Rule Treatment Failure 1 No
Lead and Copper Rule Treatment Failure 1 No
Consumer Confidence Report Rule Reporting Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
04479 0.0025 mg/L No N/A
04443 0.0013 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 2 ZIP codes confirmed via EPA Community Water System Service Area Boundaries v3 plus 1 additional ZIP inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Guilford-sangerville Utilities District (ME0090640) on EPA.gov.

Frequently Asked Questions

Is Guilford-sangerville Utilities District water safe to drink?

Guilford-sangerville Utilities District has recorded 1 health-based violation in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.

How many people does Guilford-sangerville Utilities District serve?

Guilford-sangerville Utilities District serves approximately 1,535 people across 3 ZIP codes in Maine.

Where does Guilford-sangerville Utilities District get its water?

The primary water source is groundwater.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
121
Unknown Material
500
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-01-01 did not exceed the federal lead action level.
Population served: 1,535
Reported to Maine

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Guilford-sangerville Utilities District safe to drink?
Guilford-sangerville Utilities District has a C safety grade based on 8 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Guilford-sangerville Utilities District's water?
Detected contaminants include Total Trihalomethanes (TTHM), Stage 1 DBP Rule, Contaminant 1927, Surface Water Treatment Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 5 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Guilford-sangerville Utilities District serve?
Guilford-sangerville Utilities District serves approximately 1,535 people with drinking water across 3 ZIP codes.
What is Guilford-sangerville Utilities District's water source?
Guilford-sangerville Utilities District draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Guilford-sangerville Utilities District's water?
The maximum detected lead level is 0.0025 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Guilford-sangerville Utilities District's service area?
The Guilford-sangerville Utilities District service area has a median household income of $49,432. EPA EJScreen data classifies 88% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Guilford-sangerville Utilities District get its water?
Guilford-sangerville Utilities District's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Guilford-sangerville Utilities District (EPA ID: ME0090640) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Maine Guilford-sangerville Utilities District

Get safety alerts for Guilford-sangerville Utilities District, Maine

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.