Town of Walkersville
EPA ID: MD0100025 · 8,440 people served · 2 ZIP codes
ZipCheckup's reading of EPA records for Town of Walkersville (MD0100025): 1 violation on record since 2021. Past violations at Town of Walkersville total 1, all marked resolved; it supplies 8,440 residents.
Data: EPA SDWIS
Service Area Map
Coverage area for Town of Walkersville Source: EPA SDWIS service area boundaries.
Service area boundary - average Home Safety grade of mapped ZIPs: C
Demographics of ZIP Codes Served
The ZIP codes associated with Town of Walkersville have a median household income of $115,405 and about 52,254 residents live in those ZIP codes (Census; not the number of people this system supplies). Approximately 58% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
🌊 Where Does Your Water Come From?
Town of Walkersville's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.
Superfund Proximity Note: This service area ranks in the 70th percentile nationally for proximity to Superfund (NPL) sites.
Infrastructure Risk
PFAS in ZIP Codes This System Serves
PFAS ("forever chemicals") have been reported in samples from water systems associated with the ZIP codes in this system's area. These results can come from other water systems serving the same ZIP codes; check the UCMR5 section for any results reported for this system. 1 detection recorded.
Comparable Water Systems
Similar-sized systems in Maryland
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Town of Walkersville (EPA ID: MD0100025) is a community water system in Maryland that serves approximately 8,440 people from surface water sources.
This system provides water to 2 ZIP codes across 2 communities.
ZIP-Area Home Safety Context: C (64/100)
This is the average Home Safety Score for 1 of 2 service-area ZIP codes with all required score domains observed. It is not a grade for the water utility.
Model 4.0.0 uses SDWIS identity plus accepted ECHO SDWA lifecycle-based water compliance, the UCMR 5 PFAS MCL screen, EPA radon zone, and annual EPA AirData AQI across three equally weighted domains. Missing required evidence suppresses the score.
Violation History
Status breakdown for accepted records with record years 2021-2026: 1 resolved, 0 archived, 0 addressed, and 0 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| July 2, 2025 | LEAD AND COPPER RULE REVISIONS | Non-health-based | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| LEAD AND COPPER RULE REVISIONS | Monitoring & Reporting | 1 | No |
Lead & Copper
EPA Lead and Copper Rule evidence attributed directly to this water system:
| Lead Level | Exceeds Action Level | Sample Date |
|---|---|---|
| Below the reporting limit | No | 2018-12-31 |
No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.
Radon Risk in Service Area
2 of 2 ZIP records with known zones are in EPA Radon Zone 1.
The EPA recommends testing all homes regardless of radon zone. County radon zones cannot replace an in-home radon test.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by MD or modeled from parcel and building-footprint data.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View available EPA compliance records for Town of Walkersville (MD0100025) on EPA.gov.
Frequently Asked Questions
Is Town of Walkersville water safe to drink?
The accepted 2026Q2 ECHO snapshot shows no current noncompliance for Town of Walkersville; its 1 accepted 2021-2026 record are resolved or archived. Historical compliance status does not establish conditions at a specific tap.
How many people does Town of Walkersville serve?
Town of Walkersville serves approximately 8,440 people across 2 ZIP codes in Maryland.
Where does Town of Walkersville get its water?
The primary water source is surface water.
Federal UCMR5 PFAS Monitoring: No PFAS Reported Above Reporting Levels
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were reported above UCMR5 minimum reporting levels.
EPA's April 2024 PFAS rule sets MCLs of 4 ppt for PFOA and PFOS and 10 ppt for PFHxS, PFNA and HFPO-DA (GenX); water systems must comply from 2029. Other PFAS compounds have no individual federal MCL. A state standard is shown only where this system's state has its own enforceable PFAS limit. Detection results are EPA UCMR5 samples, not a measurement at your tap.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
How Water Systems Appear in Rankings
Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.
Frequently Asked Questions
How to cite this page
ZipCheckup. (n.d.). Town of Walkersville (MD): 1 EPA Violation. https://zipcheckup.com/water-system/md0100025/
@misc{zipcheckup-water-system-md0100025,
author = {{ZipCheckup}},
title = {{Town of Walkersville (MD): 1 EPA Violation}},
year = {n.d.},
url = {https://zipcheckup.com/water-system/md0100025/}
}
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Town of Walkersville (EPA ID: MD0100025) - request the latest Consumer Confidence Report or ask about specific contaminants.