Water System Report MD

Town of Chesapeake City [formerly South]

EPA ID: MD0070006 · 673 people served · 3 ZIP codes

Over five tracked years, Town of Chesapeake City [formerly South] has stayed completely violation-free for its 673 residents.

Data: EPA SDWIS Last verified: 2026-04-02

C · 62
Avg Safety Score
673
People Served
3
ZIP Codes Served
0
Violations (5yr)
Groundwater
Water Source
Zone 2
Radon Risk · Moderate
0
Contaminants Flagged
$353K
Median Home Value in Service Area

Compliance Trajectory

Stable · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 2 (2021) to 6 (2025). Violation counts have remained relatively steady.

Service Area Map

Coverage area for Town of Chesapeake City [formerly South] Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$84,608
Median Household Income
49,599
Service Area Population
11%
Disadvantaged Population
40th
Poverty Percentile
60th
Energy Burden Percentile
57%
Pre-1986 Housing

The Town of Chesapeake City [formerly South] serves a community with a median household income of $84,608 and an estimated 49,599 residents across its service area. Approximately 57% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

💧 Where Does Your Water Come From?

Groundwater

Town of Chesapeake City [formerly South]'s water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Moderate Risk
Source Contamination Risk
20th
Wastewater Discharge Proximity
90th
Superfund Site Proximity

About 1% of homes in Cecil County, Maryland rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Superfund Proximity Note: This service area ranks in the 90th percentile nationally for proximity to Superfund (NPL) sites. Groundwater sources near contaminated sites may face elevated risk from industrial chemicals.

Infrastructure Risk

51 yr
Avg Pipe Age
Copper
Pipe Material
17 yr
Est. Remaining Life
Stable
Decay Status
Installed 75% of expected lifespan used End of life

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 8 detections recorded. 2 exceed federal EPA limits (4 ppt for PFOA/PFOS). 1 exceeds state limits.

State limits: PFOA: 0.01 ppt, PFOS: 0.01 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Maryland

Mount Aetna
688 people
0 violations
0 violations
Town of Queenstown
705 people
0 violations
Town of Millington
625 people
B 2 violations
Town of Sharptown
625 people
B 3 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation PFAS Treatment Water Filtration
Flood Insurance $1,000
Radon Mitigation $400
PFAS Treatment $200
Water Filtration $100
Total Estimated Cost $1,700

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$165
10 years
$330
20 years
$660

Compare: Estimated remediation cost is $1,700 (one-time) vs. $330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Town of Chesapeake City [formerly South] (EPA ID: MD0070006) is a community water system in Maryland that serves approximately 673 people from groundwater sources.

This system provides water to 3 ZIP codes across 3 communities.

Average Home Safety Score: C (62/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

No violations recorded — This water system has no recorded EPA violations in the past 5 years.

Lead & Copper

No Lead and Copper Rule sampling data available for this water system.

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by MD or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Town of Chesapeake City [formerly South] (MD0070006) on EPA.gov.

Frequently Asked Questions

Is Town of Chesapeake City [formerly South] water safe to drink?

Based on EPA records, Town of Chesapeake City [formerly South] has no recorded violations in the past 5 years — a positive indicator of water quality management.

How many people does Town of Chesapeake City [formerly South] serve?

Town of Chesapeake City [formerly South] serves approximately 673 people across 3 ZIP codes in Maryland.

Where does Town of Chesapeake City [formerly South] get its water?

The primary water source is groundwater.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Purchased from another utility
Treated water purchased wholesale from another water system.
Disinfectant used
Chlorine
Treatment chemicals reported
chlorine

Source: TOWN OF CHESAPEAKE CITY [FORMERLY SOUTH] Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Standard
Disinfection plus one or more treatment additives — typically corrosion control, pH adjustment, or fluoridation. Standard regime for utilities serving treated municipal water.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
chlorine

Treatment classification and chemical list sourced from TOWN OF CHESAPEAKE CITY [FORMERLY SOUTH] Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
389
Unknown Material
0
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2011-01-01 did not exceed the federal lead action level.
Population served: 673
Reported to Maryland

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Town of Chesapeake City [formerly South] safe to drink?
Town of Chesapeake City [formerly South] has a C safety grade based on 0 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
Should I use a water filter?
Town of Chesapeake City [formerly South] meets EPA standards, but a water filter can reduce trace contaminants below detectable levels for added peace of mind.
How many people does Town of Chesapeake City [formerly South] serve?
Town of Chesapeake City [formerly South] serves approximately 673 people with drinking water across 3 ZIP codes.
What is Town of Chesapeake City [formerly South]'s water source?
Town of Chesapeake City [formerly South] draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
What is the demographic profile of Town of Chesapeake City [formerly South]'s service area?
The Town of Chesapeake City [formerly South] service area has a median household income of $84,608. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Town of Chesapeake City [formerly South] get its water?
Town of Chesapeake City [formerly South]'s water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Town of Chesapeake City [formerly South] (EPA ID: MD0070006) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Maryland Town of Chesapeake City [formerly South]

Get safety alerts for Town of Chesapeake City [formerly South], Maryland

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Check your water filter options Free tool — no phone call required.