City of Annapolis
EPA ID: MD0020001 · 35,000 people served · 3 ZIP codes
ZipCheckup's reading of EPA records for City of Annapolis (MD0020001): 1 violation on record since 2021. Within the EPA violation records on file, City of Annapolis accumulated 1 violation, and every finding is recorded as resolved; the utility supplies water to approximately 35,000 people. Resolution of past violations is not a statement about current water quality.
Data: EPA SDWIS
Service Area Map
Coverage area for City of Annapolis Source: EPA SDWIS service area boundaries.
Service area boundary - average Home Safety grade of mapped ZIPs: B
Demographics of ZIP Codes Served
The ZIP codes associated with City of Annapolis have a median household income of $119,296 and about 92,726 residents live in those ZIP codes (Census; not the number of people this system supplies). Approximately 58% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
💧 Where Does Your Water Come From?
City of Annapolis's water is classified in EPA records as a groundwater source. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
Superfund Proximity Note: This service area ranks in the 70th percentile nationally for proximity to Superfund (NPL) sites. Groundwater sources near contaminated sites may face elevated risk from industrial chemicals.
Infrastructure Risk
Comparable Water Systems
Similar-sized systems in Maryland
System Overview
City of Annapolis (EPA ID: MD0020001) is a community water system in Maryland that serves approximately 35,000 people from groundwater sources.
This system provides water to 3 ZIP codes across 2 communities.
ZIP-Area Home Safety Context: B (82/100)
This is the average Home Safety Score for 2 of 3 service-area ZIP codes with all required score domains observed. It is not a grade for the water utility.
Model 4.0.0 uses SDWIS identity plus accepted ECHO SDWA lifecycle-based water compliance, the UCMR 5 PFAS MCL screen, EPA radon zone, and annual EPA AirData AQI across three equally weighted domains. Missing required evidence suppresses the score.
Violation History
Status breakdown for accepted records with record years 2021-2026: 1 resolved, 0 archived, 0 addressed, and 0 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| January 1, 2021 | Fluoride | Non-health-based | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Fluoride | Monitoring & Reporting | 1 | No |
Lead & Copper
EPA Lead and Copper Rule evidence attributed directly to this water system:
| Lead Level | Exceeds Action Level | Sample Date |
|---|---|---|
| 0.0063 mg/L | No | 2023-12-31 |
No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.
Radon Risk in Service Area
3 of 3 ZIP records with known zones are in EPA Radon Zone 2.
The EPA recommends testing all homes regardless of radon zone. County radon zones cannot replace an in-home radon test.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by MD or modeled from parcel and building-footprint data.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View available EPA compliance records for City of Annapolis (MD0020001) on EPA.gov.
Frequently Asked Questions
Is City of Annapolis water safe to drink?
The accepted 2026Q2 ECHO snapshot shows no current noncompliance for City of Annapolis; its 1 accepted 2021-2026 record are resolved or archived. Historical compliance status does not establish conditions at a specific tap.
How many people does City of Annapolis serve?
City of Annapolis serves approximately 35,000 people across 3 ZIP codes in Maryland.
Where does City of Annapolis get its water?
The primary water source is groundwater.
Federal UCMR5 PFAS Monitoring: No PFAS Reported Above Reporting Levels
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were reported above UCMR5 minimum reporting levels.
EPA's April 2024 PFAS rule sets MCLs of 4 ppt for PFOA and PFOS and 10 ppt for PFHxS, PFNA and HFPO-DA (GenX); water systems must comply from 2029. Other PFAS compounds have no individual federal MCL. A state standard is shown only where this system's state has its own enforceable PFAS limit. Detection results are EPA UCMR5 samples, not a measurement at your tap.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
How Water Systems Appear in Rankings
Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.
Frequently Asked Questions
How to cite this page
ZipCheckup. (n.d.). City of Annapolis (MD): 1 EPA Violation. https://zipcheckup.com/water-system/md0020001/
@misc{zipcheckup-water-system-md0020001,
author = {{ZipCheckup}},
title = {{City of Annapolis (MD): 1 EPA Violation}},
year = {n.d.},
url = {https://zipcheckup.com/water-system/md0020001/}
}
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
City of Annapolis (EPA ID: MD0020001) - request the latest Consumer Confidence Report or ask about specific contaminants.