Monitoring Violations MA

Swansea Water District

EPA ID: MA4292000 · 17,375 people served · 1 ZIP code

The EPA enforcement database lists 1 active violation for Swansea Water District — a provider that delivers drinking water to approximately 17,375 people and has not yet formally resolved those findings.

Data: EPA SDWIS Last verified: 2026-04-02

B · 71
Avg Safety Score
17,375
People Served
1
ZIP Code Served
2
Violations (5yr)
Surface Water
Water Source
0.002 mg/L
Max Lead Level
Zone 2
Radon Risk · Moderate
2
Contaminants Flagged
$415K
Median Home Value in Service Area

Service Area Map

Coverage area for Swansea Water District Source: EPA SDWIS service area boundaries.

Service area boundary — Grade B

Service Area Demographics

$116,627
Median Household Income
17,231
Service Area Population
36%
Disadvantaged Population
40th
Poverty Percentile
60th
Energy Burden Percentile
75%
Pre-1986 Housing

The Swansea Water District serves a community with a median household income of $116,627 and an estimated 17,231 residents across its service area. Approximately 75% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 36% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

🌊 Where Does Your Water Come From?

Surface Water

Swansea Water District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
40th
Wastewater Discharge Proximity
70th
Superfund Site Proximity

About 1% of homes in Bristol County, Massachusetts rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Superfund Proximity Note: This service area ranks in the 70th percentile nationally for proximity to Superfund (NPL) sites.

Infrastructure Risk

65 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
0 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 100% of expected lifespan used End of life

Detected Contaminants

How Swansea Water District compares to EPA limits

What This Means For You

Contaminant 4044 at 1 mg/L exceeds the EPA maximum of mg/L.

Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 6 detections recorded. 1 exceeds federal EPA limits (4 ppt for PFOA/PFOS).

State limits: PFAS6: 0.02 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Comparable Water Systems

Similar-sized systems in Massachusetts

Amesbury Dpw Water Div.
17,366 people
C 1 violation
B 0 violations
Sharon Water Department
16,991 people
B 0 violations
Webster Water Department
17,776 people
C 2 violations
C 0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance PFAS Treatment Radon Mitigation
Flood Insurance $1,200
PFAS Treatment $600
Radon Mitigation $400
Total Estimated Cost $2,200

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $2,200 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Swansea Water District (EPA ID: MA4292000) is a community water system in Massachusetts that serves approximately 17,375 people from surface water sources.

This system serves ZIP code 02777 in Swansea.

Average Home Safety Score: B (71/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

2 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
April 1, 2024 Contaminant 4044 Monitoring Unresolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Contaminant 4044 Other Violation 1 No
Surface Water Treatment Rule Treatment Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
02777 0.002 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by MA or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Swansea Water District (MA4292000) on EPA.gov.

Frequently Asked Questions

Is Swansea Water District water safe to drink?

Swansea Water District has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Swansea Water District serve?

Swansea Water District serves approximately 17,375 people across 1 ZIP code in Massachusetts.

Where does Swansea Water District get its water?

The primary water source is surface water.

Contact Your Water Utility

Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.

Phone
508-676-9097
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Address
700 Wilbur Avenue, Swansea, MA

Contact information from Swansea Water District Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.

Water Source & Treatment

Where this water originates and how it's treated before reaching your tap.

Source
Groundwater
Drawn from underground aquifers via wells.
Disinfectant used
Chlorine
Treatment chemicals reported
Sodium HypochloriteSodium HydroxideSodium CarbonateFluoride (discontinued by vote)

Source: Swansea Water District Consumer Confidence Report.

ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.

Treatment regime

How this utility classifies its treatment process and what each reported treatment chemical does.

Treatment classification
Multi-stage
Multiple treatment stages — typically coagulation, filtration, and disinfection. Common for surface-water systems requiring removal of particulates, microorganisms, and dissolved organic compounds before disinfection.

Treatment chemicals and what each one does

Chemical names are reported verbatim by the utility. Purpose categories are ZipCheckup annotations based on standard drinking-water treatment practice.

Disinfectant
Inactivates bacteria, viruses, and parasites in the treated water.
Sodium Hypochlorite
pH adjustment
Raises or lowers water acidity to protect pipes and improve treatment performance.
Sodium HydroxideSodium Carbonate
Other reported chemicals
Reported by the utility but not in our annotation dictionary.
Fluoride (discontinued by vote)

Treatment classification and chemical list sourced from Swansea Water District Consumer Confidence Report.

Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
348
Detections
13
Latest sample
8/5/2024
Highest analyte
PFBA: 10.9 ppt
Analyte Max detected Current MCL Status
PFBA 10.9 ppt
PFHxS 7.7 ppt 10 ppt Below current MCL
PFOA 5.1 ppt 10 ppt Above 2029 federal MCL
PFPeA 4.9 ppt
PFHxA 4 ppt
PFBS 3.5 ppt

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

PFAS Substances Detected in This System

This water system's Consumer Confidence Report disclosed the following PFAS compounds. Levels are from the utility's most recent reporting cycle.

Substance Detected level EPA limit Status
PFAS6
Not yet EPA-regulated
Not disclosed No federal limit set
PFOA
Perfluorooctanoic acid
EPA-regulated (2024 NPDWR)
Not disclosed 4 ppt
PFBA
Not yet EPA-regulated
Not disclosed No federal limit set
PFPeA
Not yet EPA-regulated
Not disclosed No federal limit set
PFHxA
Not yet EPA-regulated
Not disclosed No federal limit set
PFHxS
Perfluorohexanesulfonic acid
EPA-regulated (2024 NPDWR)
Not disclosed 10 ppt
PFBS
Perfluorobutanesulfonic acid
EPA-regulated (2024 NPDWR)
Component of EPA Hazard Index — combined exposure assessed against unitless threshold of 1.0.
Not disclosed No federal limit set

In April 2024, EPA finalized the first National Primary Drinking Water Regulation for six PFAS. Public water systems have until 2029 to comply. EPA — PFAS regulation overview →

Source: Consumer Confidence Report disclosed by Swansea Water District.

ZipCheckup is not affiliated with this water utility. PFAS detection data is sourced from public Consumer Confidence Reports filed by the utility itself.

Learn more about PFAS health effects and filtration →

Lead Service Line Inventory

Utility-reported lead service line presence and tap-sample lead level under federal LCRI requirements:

None reported
Lead Service Lines Reported
0.003 mg/L
Tap Sample Lead Level

Below federal action level (0.015 mg/L)

MassDEP reports utility-level presence flag and tap-sampling without per-line breakdown. Customers should inquire with the utility about service line material at a specific address.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Did not report any required service line types
Latest tap sample on 2025-01-01 did not exceed the federal lead action level.
Population served: 17,375
Reported to Massachusetts

Source: MassDEP LCRR Service Line Inventory · Submitted 2024

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Notable events and violations

This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.

Federal compliance violations on record

These entries are taken verbatim from the utility's CCR violations section. EPA defines four broad violation categories: Maximum Contaminant Level (MCL), Treatment Technique (TT), Monitoring & Reporting (M&R), and Public Notification (PN).

  • MCL violation
    Date not published
    HAA5 LRAA at Standpipe/Sharps Lot Road location was 65.43 ppb, exceeding MCL of 60 ppb

Violations record from Swansea Water District Consumer Confidence Report.

Notable events from the utility's CCR

These bullet entries are the utility's own narration of operational, regulatory, or infrastructure events during the reporting period.

Notable events from Swansea Water District Consumer Confidence Report:
  • Level 1 and Level 2 assessments completed for total coliform findings; 3 corrective actions completed
  • HAA5 MCL exceedance noted in public notice dated May 28, 2024

ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.

Frequently Asked Questions

Is water from Swansea Water District safe to drink?
Swansea Water District earns a B safety grade with 2 violations in the past 5 years. Tap water meets EPA standards for most contaminants.
What contaminants are in Swansea Water District's water?
Detected contaminants include Contaminant 4044, Surface Water Treatment Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 2 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Swansea Water District serve?
Swansea Water District serves approximately 17,375 people with drinking water across 1 ZIP code.
What is Swansea Water District's water source?
Swansea Water District draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Swansea Water District's water?
The maximum detected lead level is 0.002 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Swansea Water District's service area?
The Swansea Water District service area has a median household income of $116,627. EPA EJScreen data classifies 36% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does Swansea Water District get its water?
Swansea Water District's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Swansea Water District (EPA ID: MA4292000) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Massachusetts Swansea Water District

Get safety alerts for Swansea Water District, Massachusetts

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.