Monitoring Violations MA

Beverly Water Department

EPA ID: MA3030000 · 47,461 people served · 3 ZIP codes

Right now, Beverly Water Department shows 1 EPA violation marked active and unresolved — the provider continues to supply approximately 47,461 residents while each finding awaits closure.

Data: EPA SDWIS Last verified: 2026-04-02

C · 56
Avg Safety Score
47,461
People Served
3
ZIP Codes Served
1
Violations (5yr)
Surface Water
Water Source
0.0017 mg/L
Max Lead Level
Zone 1
Radon Risk · High
1
Contaminants Flagged
$620K
Median Home Value in Service Area

Service Area Map

Coverage area for Beverly Water Department Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$102,347
Median Household Income
86,523
Service Area Population
27%
Disadvantaged Population
30th
Poverty Percentile
60th
Energy Burden Percentile
76%
Pre-1986 Housing

The Beverly Water Department serves a community with a median household income of $102,347 and an estimated 86,523 residents across its service area. Approximately 76% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

🌊 Where Does Your Water Come From?

Surface Water

Beverly Water Department's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Elevated Risk
Source Contamination Risk
40th
Wastewater Discharge Proximity
70th
Superfund Site Proximity

About 1% of homes in Essex County, Massachusetts rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Superfund Proximity Note: This service area ranks in the 70th percentile nationally for proximity to Superfund (NPL) sites.

Infrastructure Risk

80 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
10 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 89% of expected lifespan used End of life

Detected Contaminants

How Beverly Water Department compares to EPA limits

Mercury 1 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.002 mg/L
Kidney damage, neurological impairment

What This Means For You

Mercury at 1 mg/L exceeds the EPA maximum of 0.002 mg/L. Kidney damage, neurological impairment. Consider activated carbon (GAC) filtration.

PFAS Detected in Service Area

PFAS ("forever chemicals") have been detected in water serving this system's area. 4 detections recorded.

State limits: PFAS6: 0.02 ppt
Health concern: PFAS are linked to cancer, thyroid disease, immune suppression, and developmental effects. They do not break down naturally.
Recommended filter: Reverse osmosis (RO) or activated carbon filters certified for PFAS removal. Find the right filter →

Mercury was detected in this water system. activated carbon (GAC) filtration can reduce exposure.

Find a certified water filter →

Comparable Water Systems

Similar-sized systems in Massachusetts

C 4 violations
C 23 violations
D 0 violations
C 1 violation
0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Flood Insurance PFAS Treatment
Radon Mitigation $1,200
Flood Insurance $1,200
PFAS Treatment $333
Total Estimated Cost $2,733

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

PFAS Exposure — Lifetime Cost $1,000

Per person (emerging research est.)

Estimated Cumulative Cost Per Household

5 years
$2,665
10 years
$5,330
20 years
$10,660

Compare: Estimated remediation cost is $2,733 (one-time) vs. $5,330 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Beverly Water Department (EPA ID: MA3030000) is a community water system in Massachusetts that serves approximately 47,461 people from surface water sources.

This system provides water to 3 ZIP codes across 3 communities.

Average Home Safety Score: C (56/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

1 monitoring/reporting violation recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Mercury Inorganic 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
01915 0.0017 mg/L No N/A

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by MA or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Beverly Water Department (MA3030000) on EPA.gov.

Frequently Asked Questions

Is Beverly Water Department water safe to drink?

Beverly Water Department has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Beverly Water Department serve?

Beverly Water Department serves approximately 47,461 people across 3 ZIP codes in Massachusetts.

Where does Beverly Water Department get its water?

The primary water source is surface water.

Federal UCMR5 PFAS Monitoring: Detected

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.

Samples collected
116
Detections
4
Latest sample
1/14/2025
Highest analyte
PFPeA: 4.1 ppt
Analyte Max detected Current MCL Status
PFPeA 4.1 ppt
PFHxA 3.6 ppt

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →

Understand PFAS health context and filtration →

Lead Service Line Inventory

Utility-reported lead service line presence and tap-sample lead level under federal LCRI requirements:

None reported
Lead Service Lines Reported
Non-detect
Tap Sample Lead Level

Below federal action level (0.015 mg/L)

MassDEP reports utility-level presence flag and tap-sampling without per-line breakdown. Customers should inquire with the utility about service line material at a specific address.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Did not report any required service line types
Latest tap sample on 2007-01-01 did not exceed the federal lead action level.
Population served: 47,461
Reported to Massachusetts

Source: MassDEP LCRR Service Line Inventory · Submitted 2024

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Beverly Water Department safe to drink?
Beverly Water Department has a C safety grade based on 1 recorded violation. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Beverly Water Department's water?
Detected contaminants include Mercury. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Beverly Water Department serve?
Beverly Water Department serves approximately 47,461 people with drinking water across 3 ZIP codes.
What is Beverly Water Department's water source?
Beverly Water Department draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Beverly Water Department's water?
The maximum detected lead level is 0.0017 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Beverly Water Department's service area?
The Beverly Water Department service area has a median household income of $102,347. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Beverly Water Department get its water?
Beverly Water Department's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on violation history and environmental factors, the source contamination risk is currently elevated.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Beverly Water Department (EPA ID: MA3030000) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Massachusetts Beverly Water Department

Get safety alerts for Beverly Water Department, Massachusetts

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.