Current Noncompliance MA

Belmont Water Department (mwra)

EPA ID: MA3026000 ยท 27,442 people served ยท 1 ZIP code

ZipCheckup's reading of EPA SDWIS for Belmont Water Department (mwra) (MA3026000): 1 unresolved EPA violation on record. Per EPA records, Belmont Water Department (mwra): 1 unresolved violation, 27,442 people in service area.

Data: EPA SDWIS

C ยท 65
Avg Safety Score
27,442
People Served
1
ZIP Code Served
1
Violations (5yr)
Surface Water
Water Source
0.0015 mg/L
Max Lead Level
Zone 1
Radon Risk ยท High
1
Contaminants Flagged
$1.1M
Median Home Value in Service Area

Service Area Map

Coverage area for Belmont Water Department (mwra) Source: EPA SDWIS service area boundaries.

Service area boundary - Grade C

Service Area Demographics

$177,790
Median Household Income
26,966
Service Area Population
12%
Disadvantaged Population
20th
Poverty Percentile
40th
Energy Burden Percentile
90%
Pre-1986 Housing

The Belmont Water Department (mwra) serves a community with a median household income of $177,790 and an estimated 26,966 residents across its service area. Approximately 90% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

๐ŸŒŠ Where Does Your Water Come From?

Surface Water

Belmont Water Department (mwra)'s water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
50th
Wastewater Discharge Proximity
80th
Superfund Site Proximity

Superfund Proximity Note: This service area ranks in the 80th percentile nationally for proximity to Superfund (NPL) sites.

Infrastructure Risk

125 yr
Avg Pipe Age
Galvanized Steel or Lead
Pipe Material
0 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 100% of expected lifespan used End of life

Detected Contaminants

How Belmont Water Department (mwra) compares to EPA limits

What This Means For You

Stage 1 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Comparable Water Systems

Similar-sized systems in Massachusetts

Wannacomet Water Company
27,703 people
5 violations
D 1 violation
C 0 violations
Danvers Water Department
28,087 people
D 1 violation
C 1 violation

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Radon Mitigation Flood Insurance
Radon Mitigation $1,200
Flood Insurance $1,200
Total Estimated Cost $2,400

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$2,500
10 years
$5,000
20 years
$10,000

Compare: Estimated remediation cost is $2,400 (one-time) vs. $5,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Belmont Water Department (mwra) (EPA ID: MA3026000) is a community water system in Massachusetts that serves approximately 27,442 people from surface water sources.

This system serves ZIP code 02478 in Belmont.

ZIP-Area Home Safety Context: C (65/100)

This is the average Home Safety Score for 1 of 1 service-area ZIP codes with all required score domains observed. It is not a grade for the water utility.

Model 4.0.0 uses SDWIS identity plus accepted ECHO SDWA lifecycle-based water compliance, the UCMR 5 PFAS MCL screen, EPA radon zone, and annual EPA AirData AQI across three equally weighted domains. Missing required evidence suppresses the score.

Violation History

1 current noncompliance record in the accepted 2026Q2 snapshot; none are classified as health-based in this evidence.

Status breakdown for accepted records with record years 2021-2026: 0 resolved, 0 archived, 1 addressed, and 0 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.

Recent Violations

Date Contaminant Type Status
June 1, 2023 Stage 1 DBP Rule Non-health-based Addressed (current)

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Stage 1 DBP Rule Treatment Failure 1 No

Lead & Copper

EPA Lead and Copper Rule evidence attributed directly to this water system:

Lead Level Exceeds Action Level Sample Date
0.0015 mg/L No N/A

No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20โ€“$50 (DIY kit) ยท Professional inspection: $150โ€“$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking โ€” this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by MA or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Belmont Water Department (mwra) (MA3026000) on EPA.gov.

Frequently Asked Questions

Is Belmont Water Department (mwra) water safe to drink?

The accepted 2026Q2 ECHO snapshot shows 1 current noncompliance record and zero current records classified as health-based. That classification is not a property-specific water test or safety guarantee.

How many people does Belmont Water Department (mwra) serve?

Belmont Water Department (mwra) serves approximately 27,442 people across 1 ZIP code in Massachusetts.

Where does Belmont Water Department (mwra) get its water?

The primary water source is surface water.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
116

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) โ€” per-system federal sampling, 2023โ€“2025. EPA UCMR5 monitoring program โ†’

Understand PFAS health context and filtration โ†’

Frequently Asked Questions

Is water from Belmont Water Department (mwra) safe to drink?
Belmont Water Department (mwra) has a C safety grade based on 1 recorded violation. Some contaminants may exceed EPA limits - independent testing is recommended.
What contaminants are in Belmont Water Department (mwra)'s water?
Detected contaminants include Stage 1 DBP Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 1 contaminant above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Belmont Water Department (mwra) serve?
Belmont Water Department (mwra) serves approximately 27,442 people with drinking water across 1 ZIP code.
What is Belmont Water Department (mwra)'s water source?
Belmont Water Department (mwra) draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in Belmont Water Department (mwra)'s water?
The maximum detected lead level is 0.0015 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Belmont Water Department (mwra)'s service area?
The Belmont Water Department (mwra) service area has a median household income of $177,790. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Belmont Water Department (mwra) get its water?
Belmont Water Department (mwra)'s water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

How to cite this page

APA ZipCheckup. (n.d.). Belmont Water Department (mwra) (MA): 1 EPA Violation. https://zipcheckup.com/water-system/ma3026000/
BibTeX
@misc{zipcheckup-water-system-ma3026000,
  author = {{ZipCheckup}},
  title  = {{Belmont Water Department (mwra) (MA): 1 EPA Violation}},
  year   = {n.d.},
  url    = {https://zipcheckup.com/water-system/ma3026000/}
}

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter โ†’

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report โ†’

3

Contact your utility

Belmont Water Department (mwra) (EPA ID: MA3026000) - request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Massachusetts Belmont Water Department (mwra)

Get safety alerts for Belmont Water Department (mwra), Massachusetts

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found - check filter options Free tool - no phone call required.