Town of Melville Water System
EPA ID: LA1097007 · 1,314 people served · 1 ZIP code
Per EPA records, Town of Melville Water System: 29 unresolved violations, 1,314 people in service area.
Data: EPA SDWIS Last verified: 2026-04-02
Compliance Trajectory
Worsening · Risk tier: High · 95% chance of violation in next 12 months
Violations went from 2 (2021) to 1 (2025). The pattern suggests growing compliance challenges.
Service Area Map
Coverage area for Town of Melville Water System Source: EPA SDWIS service area boundaries.
Service area boundary — Grade B
Service Area Demographics
The Town of Melville Water System serves a community with a median household income of $41,875 and an estimated 1,609 residents across its service area. Approximately 64% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
Environmental Justice Note: 84% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.
💧 Where Does Your Water Come From?
Town of Melville Water System's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
About 1% of homes in St. Landry Parish, Louisiana rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Wastewater Proximity Note: This service area ranks in the 60th percentile nationally for proximity to wastewater discharge points.
Infrastructure Risk
Detected Contaminants
How Town of Melville Water System compares to EPA limits
What This Means For You
Lead and Copper Rule at 11 mg/L exceeds the EPA maximum of mg/L.
Stage 1 DBP Rule at 7 mg/L exceeds the EPA maximum of mg/L.
Surface Water Treatment Rule at 7 mg/L exceeds the EPA maximum of mg/L.
Stage 2 DBP Rule at 3 mg/L exceeds the EPA maximum of mg/L.
Contaminant 0700 at 3 mg/L exceeds the EPA maximum of mg/L.
Comparable Water Systems
Similar-sized systems in Louisiana
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Town of Melville Water System (EPA ID: LA1097007) is a community water system in Louisiana that serves approximately 1,314 people from groundwater sources.
This system serves ZIP code 71353 in Melville.
Average Home Safety Score: B (75/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| September 10, 2025 | Contaminant 0700 | Health-based | Unresolved |
| July 2, 2025 | Stage 2 DBP Rule | Monitoring | Unresolved |
| February 22, 2025 | Lead and Copper Rule | Monitoring | Unresolved |
| February 8, 2025 | Lead and Copper Rule | Monitoring | Unresolved |
| December 22, 2024 | Consumer Confidence Report Rule | Health-based | Unresolved |
| October 17, 2024 | Stage 2 DBP Rule | Monitoring | Unresolved |
| October 17, 2024 | Stage 2 DBP Rule | Health-based | Unresolved |
| October 1, 2024 | Stage 1 DBP Rule | Monitoring | Unresolved |
| July 1, 2024 | Surface Water Treatment Rule | Monitoring | Unresolved |
| February 11, 2024 | Lead and Copper Rule | Monitoring | Unresolved |
| October 1, 2023 | Stage 1 DBP Rule | Monitoring | Unresolved |
| July 1, 2023 | Surface Water Treatment Rule | Monitoring | Resolved |
| February 21, 2023 | Lead and Copper Rule | Monitoring | Unresolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Lead and Copper Rule | Treatment Failure | 11 | No |
| Stage 1 DBP Rule | Treatment Failure | 7 | No |
| Surface Water Treatment Rule | Treatment Failure | 7 | No |
| Stage 2 DBP Rule | Treatment Failure | 3 | Yes |
| Contaminant 0700 | Other Violation | 3 | Yes |
| Consumer Confidence Report Rule | Reporting Failure | 1 | Yes |
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
| ZIP Code | Lead Level | Exceeds Limit | Sample Date |
|---|---|---|---|
| 71353 | 0.002 mg/L | No | N/A |
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
- 71353 — Melville
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Town of Melville Water System (LA1097007) on EPA.gov.
Frequently Asked Questions
Is Town of Melville Water System water safe to drink?
Town of Melville Water System has recorded 5 health-based violations in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.
How many people does Town of Melville Water System serve?
Town of Melville Water System serves approximately 1,314 people across 1 ZIP code in Louisiana.
Where does Town of Melville Water System get its water?
The primary water source is groundwater.
Contact Your Water Utility
Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.
Contact information from Town of Melville Water System Consumer Confidence Report.
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Water Source & Treatment
Where this water originates and how it's treated before reaching your tap.
Source: Town of Melville Water System Consumer Confidence Report.
ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.
According to the Source Water Assessment Plan, our water system had a susceptibility rating of 'MEDIUM'.
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Aesthetic water quality
These measurements describe the look, taste, and feel of the water this utility delivers. They are not contaminant violations — they sit alongside federal Secondary Maximum Contaminant Levels (SMCLs) which the EPA publishes as non-enforceable guidance.
Aesthetic measurements from Town of Melville Water System Consumer Confidence Report.
Aesthetic measurements are reported by the utility from its annual sampling. EPA Secondary MCLs are advisory thresholds — values outside them indicate aesthetic concerns such as taste or appearance, not health violations. Federal contaminant testing is shown in the sections above.
Notable events and violations
This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.
Federal compliance violations on record
These entries are taken verbatim from the utility's CCR violations section. EPA defines four broad violation categories: Maximum Contaminant Level (MCL), Treatment Technique (TT), Monitoring & Reporting (M&R), and Public Notification (PN).
-
CCR_REPORT2023 - 2024
CCR Report violation
-
MONITORING_REPORTING · LEAD AND COPPERDate not published
LCR Follow-Up/Routine Tap M/R (outstanding)
Violations record from Town of Melville Water System Consumer Confidence Report.
ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Town of Melville Water System (EPA ID: LA1097007) — request the latest Consumer Confidence Report or ask about specific contaminants.