Sandy Point 480 Water System
EPA ID: LA1069013 · 654 people served · 2 ZIP codes
Where compliant utilities carry no open actions, Sandy Point 480 Water System shows 2 active EPA violations in the federal database for a service population of approximately 654.
Data: EPA SDWIS Last verified: 2026-04-02
Compliance Trajectory
Worsening · Risk tier: High · 95% chance of violation in next 12 months
Violations went from 4 (2021) to 11 (2025). The pattern suggests growing compliance challenges.
Service Area Map
Coverage area for Sandy Point 480 Water System Source: EPA SDWIS service area boundaries.
Service area boundary — Grade D
Service Area Demographics
The Sandy Point 480 Water System serves a community with a median household income of $43,504 and an estimated 9,833 residents across its service area. Approximately 53% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
Environmental Justice Note: 89% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.
💧 Where Does Your Water Come From?
Sandy Point 480 Water System's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
About 0% of homes in Red River Parish, Louisiana rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Wastewater Proximity Note: This service area ranks in the 65th percentile nationally for proximity to wastewater discharge points.
Infrastructure Risk
Detected Contaminants
How Sandy Point 480 Water System compares to EPA limits
What This Means For You
Total Trihalomethanes (TTHM) at 8 mg/L exceeds the EPA maximum of 0.08 mg/L. Bladder & rectal cancer risk; reproductive concerns. Consider granular activated carbon (GAC) filtration.
Contaminant 0700 at 4 mg/L exceeds the EPA maximum of mg/L.
Lead and Copper Rule at 2 mg/L exceeds the EPA maximum of mg/L.
Stage 1 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Stage 2 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Total Trihalomethanes (TTHM) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.
Find a certified water filter →Comparable Water Systems
Similar-sized systems in Louisiana
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Sandy Point 480 Water System (EPA ID: LA1069013) is a community water system in Louisiana that serves approximately 654 people from groundwater sources.
This system provides water to 2 ZIP codes across 2 communities.
Average Home Safety Score: D (46/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| August 31, 2025 | Contaminant 0700 | Health-based | Unresolved |
| October 17, 2024 | Stage 2 DBP Rule | Health-based | Resolved |
| March 1, 2023 | Lead and Copper Rule | Monitoring | Resolved |
| January 23, 2023 | Contaminant 0700 | Health-based | Unresolved |
| January 14, 2023 | Stage 1 DBP Rule | Monitoring | Resolved |
| January 1, 2023 | Total Trihalomethanes (TTHM) | Health-based | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Total Trihalomethanes (TTHM) | Disinfection Byproducts | 8 | Yes |
| Contaminant 0700 | Other Violation | 4 | Yes |
| Lead and Copper Rule | Treatment Failure | 2 | No |
| Stage 1 DBP Rule | Treatment Failure | 1 | No |
| Stage 2 DBP Rule | Treatment Failure | 1 | Yes |
Health Risk Details
Total Trihalomethanes (TTHM) (EPA limit: 0.08 mg/L)
Bladder & rectal cancer risk; reproductive concerns At-risk groups: pregnant women, long-term consumers of chlorinated water, people who frequently shower in chlorinated water.
Removal methods: granular activated carbon (GAC), carbon block filter, point-of-entry aeration. Find the right filter →
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
| ZIP Code | Lead Level | Exceeds Limit | Sample Date |
|---|---|---|---|
| 71411 | 0.013 mg/L | No | N/A |
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 3 (Low Risk)
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by LA or modeled from parcel and building-footprint data.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Sandy Point 480 Water System (LA1069013) on EPA.gov.
Frequently Asked Questions
Is Sandy Point 480 Water System water safe to drink?
Sandy Point 480 Water System has recorded 13 health-based violations in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.
How many people does Sandy Point 480 Water System serve?
Sandy Point 480 Water System serves approximately 654 people across 2 ZIP codes in Louisiana.
Where does Sandy Point 480 Water System get its water?
The primary water source is groundwater.
Contact Your Water Utility
Public-record contact information for the water utility serving this system. Use these channels to request water quality reports, ask about service, or report issues directly.
Contact information from Sandy Point 480 Water System Consumer Confidence Report.
ZipCheckup is not affiliated with this water utility, does not act as its agent, and does not provide customer support for it. Contact details shown are public-record information from CCR filings. For service issues, contact the utility directly using the information above.
Water Source & Treatment
Where this water originates and how it's treated before reaching your tap.
Source: Sandy Point 480 Water System Consumer Confidence Report.
ZipCheckup is not affiliated with this water utility. Treatment and source data are sourced from the utility's published CCR filings.
According to the Source Water Assessment Plan, our water system had a susceptibility rating of 'HIGH'.
Treatment regime
How this utility classifies its treatment process and what each reported treatment chemical does.
Treatment classification and chemical list sourced from Sandy Point 480 Water System Consumer Confidence Report.
Treatment intensity is a ZipCheckup-derived classification based on the chemicals and processes the utility reports. Chemicals and contamination sources are taken verbatim from the utility's CCR filing. Routine federal monitoring and contaminant testing shown elsewhere on this page determine whether the water meets safety standards, not the treatment classification.
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Notable events and violations
This section summarizes events the utility chose to disclose in its most recent Consumer Confidence Report, plus any federal compliance violations the utility recorded against itself. Both lists are utility-authored — ZipCheckup does not audit, judge, or reorder them.
Notable events from the utility's CCR
These bullet entries are the utility's own narration of operational, regulatory, or infrastructure events during the reporting period.
- Source iron 4.15 mg/L (14× SMCL=0.3); source manganese 0.27 mg/L (5.4× SMCL=0.05)
- Treated iron 1.59 mg/L (5.3× SMCL=0.3); treated manganese 0.18 mg/L (3.6× SMCL=0.05)
- Source pH 5.83 (acidic)
ZipCheckup note: items above reflect what the utility published in its most recent CCR. Federal violation records are also tracked separately by the EPA Safe Drinking Water Information System (SDWIS) — the SDWIS record is the authoritative federal source for any specific regulatory action.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Sandy Point 480 Water System (EPA ID: LA1069013) — request the latest Consumer Confidence Report or ask about specific contaminants.