City of Wellington
EPA ID: KS2019119 · 7,664 people served · 1 ZIP code
City of Wellington shows 3 open EPA violations in current federal records for approximately 7,664 people.
Data: EPA SDWIS Last verified: 2026-04-02
Service Area Map
Coverage area for City of Wellington Source: EPA SDWIS service area boundaries.
Service area boundary — Grade C
Service Area Demographics
The City of Wellington serves a community with a median household income of $50,836 and an estimated 9,199 residents across its service area. Approximately 79% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
Environmental Justice Note: 50% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.
🌊 Where Does Your Water Come From?
City of Wellington's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.
About 1% of homes in Sumner County, Kansas rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Infrastructure Risk
Detected Contaminants
How City of Wellington compares to EPA limits
What This Means For You
Consumer Confidence Report Rule at 4 mg/L exceeds the EPA maximum of mg/L.
Stage 1 DBP Rule at 3 mg/L exceeds the EPA maximum of mg/L.
Revised Total Coliform Rule at 3 presence exceeds the EPA maximum of presence.
Stage 2 DBP Rule at 2 mg/L exceeds the EPA maximum of mg/L.
PFAS Detected in Service Area
PFAS ("forever chemicals") have been detected in water serving this system's area. 1 detection recorded.
Comparable Water Systems
Similar-sized systems in Kansas
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
City of Wellington, (EPA ID: KS2019119) is a community water system in Kansas that serves approximately 7,664 people from surface water sources.
This system serves ZIP code 67152 in Wellington.
Average Home Safety Score: C (66/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| July 2, 2025 | Stage 2 DBP Rule | Monitoring | Unresolved |
| January 1, 2025 | Stage 1 DBP Rule | Monitoring | Resolved |
| January 1, 2025 | Consumer Confidence Report Rule | Monitoring | Resolved |
| January 1, 2025 | Revised Total Coliform Rule | Monitoring | Resolved |
| October 17, 2024 | Stage 2 DBP Rule | Monitoring | Unresolved |
| October 1, 2024 | Consumer Confidence Report Rule | Monitoring | Resolved |
| October 1, 2024 | Revised Total Coliform Rule | Monitoring | Resolved |
| October 1, 2023 | Consumer Confidence Report Rule | Monitoring | Resolved |
| October 1, 2023 | Revised Total Coliform Rule | Monitoring | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Consumer Confidence Report Rule | Reporting Failure | 4 | No |
| Stage 1 DBP Rule | Treatment Failure | 3 | No |
| Revised Total Coliform Rule | Microbiological | 3 | No |
| Stage 2 DBP Rule | Treatment Failure | 2 | No |
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
| ZIP Code | Lead Level | Exceeds Limit | Sample Date |
|---|---|---|---|
| 67152 | 0.0079 mg/L | No | N/A |
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by KS or modeled from parcel and building-footprint data.
- 67152 — Wellington
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Wellington (KS2019119) on EPA.gov.
Frequently Asked Questions
Is City of Wellington water safe to drink?
City of Wellington has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.
How many people does City of Wellington serve?
City of Wellington serves approximately 7,664 people across 1 ZIP code in Kansas.
Where does City of Wellington get its water?
The primary water source is surface water.
Federal UCMR5 PFAS Monitoring: Detected
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
How Water Systems Appear in Rankings
Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
City of Wellington (EPA ID: KS2019119) — request the latest Consumer Confidence Report or ask about specific contaminants.