Historical Compliance Records KS

City of Independence

EPA ID: KS2012508 ยท 8,464 people served ยท 1 ZIP code

ZipCheckup's reading of EPA SDWIS for City of Independence (KS2012508): 5 EPA violations in the last five years. Looking at the EPA enforcement file for City of Independence, 5 violations appear in the five-year dataset, but none remain open - the utility has addressed each finding and is in current compliance, with no pending enforcement affecting the 8,464 people in its service area.

Data: EPA SDWIS

8,464
People Served
1
ZIP Code Served
5
Violations (5yr)
Surface Water
Water Source
0.0019 mg/L
Max Lead Level
Zone 2
Radon Risk ยท Moderate
2
Contaminants Flagged
$110K
Median Home Value in Service Area

Service Area Map

Coverage area for City of Independence Source: EPA SDWIS service area boundaries.

Service area boundary

Service Area Demographics

$54,905
Median Household Income
12,996
Service Area Population
69%
Disadvantaged Population
70th
Poverty Percentile
80th
Energy Burden Percentile
83%
Pre-1986 Housing

The City of Independence serves a community with a median household income of $54,905 and an estimated 12,996 residents across its service area. Approximately 83% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

Environmental Justice Note: 69% of the population in this service area is classified as disadvantaged under EPA's EJScreen criteria. Communities with higher disadvantaged populations often face disproportionate environmental and health burdens, including aging water infrastructure and limited resources for remediation.

๐ŸŒŠ Where Does Your Water Come From?

Surface Water

City of Independence's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.

Moderate Risk
Source Contamination Risk
20th
Wastewater Discharge Proximity
20th
Superfund Site Proximity

Infrastructure Risk

75 yr
Avg Pipe Age
Galvanized Steel or Copper
Pipe Material
0 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 100% of expected lifespan used End of life

Detected Contaminants

How City of Independence compares to EPA limits

Contaminant 1009 3 mg/L (EXCEEDS LIMIT)
0 EPA Limit: 0.004 mg/L
Intestinal damage, bone damage

What This Means For You

Contaminant 1009 at 3 mg/L exceeds the EPA maximum of 0.004 mg/L. Intestinal damage, bone damage. Consider reverse osmosis filtration.

E. coli at 2 Zero tolerance (any positive sample triggers immediate action) exceeds the EPA maximum of Zero tolerance (any positive sample triggers immediate action). Severe GI illness; potentially fatal kidney failure in children. Consider UV disinfection (99.99%) filtration.

Contaminant 1009 was detected in this water system. reverse osmosis filtration can reduce exposure.

Find a certified water filter โ†’

Comparable Water Systems

Similar-sized systems in Kansas

City of Bel Aire
8,448 people
2 violations
City of Park City
8,503 people
21 violations
City of Chanute
8,642 people
B 2 violations
City of Coffeyville
8,847 people
1 violation
City of Bonner Springs
7,805 people
C 3 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Radon Mitigation
Flood Insurance $1,200
Radon Mitigation $400
Total Estimated Cost $1,600

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $1,000

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$5,000
10 years
$10,000
20 years
$20,000

Compare: Estimated remediation cost is $1,600 (one-time) vs. $10,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

City of Independence, (EPA ID: KS2012508) is a community water system in Kansas that serves approximately 8,464 people from surface water sources.

This system serves ZIP code 67301 in Independence.

Violation History

No current noncompliance in the accepted 2026Q2 snapshot. The 5 records in the 2021-2026 window are classified as resolved or archived, not current.

Status breakdown for accepted records with record years 2021-2026: 5 resolved, 0 archived, 0 addressed, and 0 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.

Recent Violations

Date Contaminant Type Status
May 1, 2023 E. coli Non-health-based Resolved
January 1, 2023 Contaminant 1009 Non-health-based Resolved
October 1, 2022 Contaminant 1009 Non-health-based Resolved
January 1, 2022 E. coli Non-health-based Resolved
February 1, 2021 Contaminant 1009 Non-health-based Resolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Contaminant 1009 Other Violation 3 No
E. coli Microbiological 2 No

Lead & Copper

EPA Lead and Copper Rule evidence attributed directly to this water system:

Lead Level Exceeds Action Level Sample Date
0.0019 mg/L No N/A

No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.

Radon Risk in Service Area

Dominant radon zone for ZIP codes served by this system: Zone 2 (Moderate Risk)

The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.

Need help with your water quality?

Typical cost: Water test: typically $20โ€“$50 (DIY kit) ยท Professional inspection: $150โ€“$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking โ€” this helps flush lead from your pipes.

ZIP Codes Served

Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by KS or modeled from parcel and building-footprint data.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for City of Independence (KS2012508) on EPA.gov.

Frequently Asked Questions

Is City of Independence water safe to drink?

The accepted 2026Q2 ECHO snapshot shows no current noncompliance for City of Independence; its 5 accepted 2021-2026 records are resolved or archived. Historical compliance status does not establish conditions at a specific tap.

How many people does City of Independence serve?

City of Independence serves approximately 8,464 people across 1 ZIP code in Kansas.

Where does City of Independence get its water?

The primary water source is surface water.

Federal UCMR5 PFAS Monitoring: Tested Clean

This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). No PFAS compounds were detected.

Samples collected
116

Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.

Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) โ€” per-system federal sampling, 2023โ€“2025. EPA UCMR5 monitoring program โ†’

Understand PFAS health context and filtration โ†’

How Water Systems Appear in Rankings

Water systems are evaluated by violation history, contaminant detections, and service population. Larger systems with more service connections appear in more rankings.

Frequently Asked Questions

What contaminants are in City of Independence's water?
Detected contaminants include Contaminant 1009, E. coli. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 2 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does City of Independence serve?
City of Independence serves approximately 8,464 people with drinking water across 1 ZIP code.
What is City of Independence's water source?
City of Independence draws water from surface water sources. Source type affects which contaminants are most likely to be present.
Is there lead in City of Independence's water?
The maximum detected lead level is 0.0019 mg/L. This is within EPA action level guidelines.
What is the demographic profile of City of Independence's service area?
The City of Independence service area has a median household income of $54,905. EPA EJScreen data classifies 69% of the population as disadvantaged, which may indicate greater vulnerability to environmental health risks.
Where does City of Independence get its water?
City of Independence's water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap. Based on available data, the source contamination risk is moderate.

How to cite this page

APA ZipCheckup. (n.d.). City of Independence (KS): 5 EPA Violations. https://zipcheckup.com/water-system/ks2012508/
BibTeX
@misc{zipcheckup-water-system-ks2012508,
  author = {{ZipCheckup}},
  title  = {{City of Independence (KS): 5 EPA Violations}},
  year   = {n.d.},
  url    = {https://zipcheckup.com/water-system/ks2012508/}
}

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter โ†’

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report โ†’

3

Contact your utility

City of Independence (EPA ID: KS2012508) - request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Kansas City of Independence

Get safety alerts for City of Independence, Kansas

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found - check filter options Free tool - no phone call required.