Williamsport Water Utility
EPA ID: IN5286004 · 1,800 people served · 2 ZIP codes
Compliance tracking for Williamsport Water Utility shows 6 pending violations logged in the EPA system — the supplier delivers water to approximately 1,800 residents while those findings remain open.
Data: EPA SDWIS Last verified: 2026-04-02
Compliance Trajectory
Stable · Risk tier: High · 95% chance of violation in next 12 months
Violations went from 1 (2023) to 1 (2025). Violation counts have remained relatively steady.
Service Area Map
Coverage area for Williamsport Water Utility Source: EPA SDWIS service area boundaries.
Service area boundary — Grade C
Service Area Demographics
The Williamsport Water Utility serves a community with a median household income of $66,621 and an estimated 8,826 residents across its service area. Approximately 74% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
💧 Where Does Your Water Come From?
Williamsport Water Utility's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
About 1% of homes in Fountain County, Indiana rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Wastewater Proximity Note: This service area ranks in the 60th percentile nationally for proximity to wastewater discharge points.
Infrastructure Risk
Detected Contaminants
How Williamsport Water Utility compares to EPA limits
What This Means For You
Total Trihalomethanes (TTHM) at 4 mg/L exceeds the EPA maximum of 0.08 mg/L. Bladder & rectal cancer risk; reproductive concerns. Consider granular activated carbon (GAC) filtration.
Surface Water Treatment Rule at 6 mg/L exceeds the EPA maximum of mg/L.
Consumer Confidence Report Rule at 2 mg/L exceeds the EPA maximum of mg/L.
Radium-228 at 1 pCi/L (combined Radium-226 & 228 ≤ 5 pCi/L) exceeds the EPA maximum of pCi/L (combined Radium-226 & 228 ≤ 5 pCi/L). Bone cancer and leukemia (known carcinogen). Consider ion exchange (water softener) filtration.
Stage 1 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.
Total Trihalomethanes (TTHM) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.
Find a certified water filter →Comparable Water Systems
Similar-sized systems in Indiana
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Williamsport Water Utility (EPA ID: IN5286004) is a community water system in Indiana that serves approximately 1,800 people from groundwater sources.
This system provides water to 2 ZIP codes across 2 communities.
Average Home Safety Score: C (68/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| September 5, 2025 | Chlorine residual | Health-based | Resolved |
| July 1, 2025 | Surface Water Treatment Rule | Monitoring | Unresolved |
| January 1, 2025 | Total Trihalomethanes (TTHM) | Monitoring | Unresolved |
| October 1, 2023 | Surface Water Treatment Rule | Monitoring | Resolved |
| July 1, 2023 | Surface Water Treatment Rule | Monitoring | Resolved |
| February 3, 2023 | Chlorine residual | Health-based | Resolved |
| January 1, 2023 | Stage 1 DBP Rule | Monitoring | Resolved |
| January 1, 2023 | Total Trihalomethanes (TTHM) | Monitoring | Unresolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Surface Water Treatment Rule | Treatment Failure | 6 | No |
| Total Trihalomethanes (TTHM) | Disinfection Byproducts | 4 | No |
| Consumer Confidence Report Rule | Reporting Failure | 2 | No |
| Chlorine residual | Disinfectant | 2 | Yes |
| Radium-228 | Radionuclides | 1 | No |
| Stage 1 DBP Rule | Treatment Failure | 1 | No |
Health Risk Details
Chlorine (Residual Disinfectant) (EPA limit: 4 mg/L (MRDL — Maximum Residual Disinfectant Level))
Irritation & DBP formation at high levels; protective at normal treatment levels At-risk groups: people with asthma or chemical sensitivities, kidney dialysis patients (water must be dechlorinated).
Removal methods: granular activated carbon (GAC), KDF media filter, carbon block filter. Find the right filter →
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
| ZIP Code | Lead Level | Exceeds Limit | Sample Date |
|---|---|---|---|
| 47993 | 0.0047 mg/L | No | N/A |
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by IN or modeled from parcel and building-footprint data.
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Williamsport Water Utility (IN5286004) on EPA.gov.
Frequently Asked Questions
Is Williamsport Water Utility water safe to drink?
Williamsport Water Utility has recorded 2 health-based violations in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.
How many people does Williamsport Water Utility serve?
Williamsport Water Utility serves approximately 1,800 people across 2 ZIP codes in Indiana.
Where does Williamsport Water Utility get its water?
The primary water source is groundwater.
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Williamsport Water Utility (EPA ID: IN5286004) — request the latest Consumer Confidence Report or ask about specific contaminants.