Clinton Water Utility
EPA ID: IN5283004 · 4,773 people served · 1 ZIP code
Based on the latest federal compliance data, Clinton Water Utility has 3 violations that the EPA has not yet closed — those outstanding findings are part of the enforcement record for a utility that delivers water to approximately 4,773 people throughout its service territory.
Data: EPA SDWIS Last verified: 2026-04-02
Service Area Map
Coverage area for Clinton Water Utility Source: EPA SDWIS service area boundaries.
Service area boundary — Grade D
Service Area Demographics
The Clinton Water Utility serves a community with a median household income of $54,181 and an estimated 9,675 residents across its service area. Approximately 76% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
💧 Where Does Your Water Come From?
Clinton Water Utility's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
About 1% of homes in Vermillion County, Indiana rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Wastewater Proximity Note: This service area ranks in the 80th percentile nationally for proximity to wastewater discharge points.
Infrastructure Risk
Detected Contaminants
How Clinton Water Utility compares to EPA limits
What This Means For You
Total Trihalomethanes (TTHM) at 1 mg/L exceeds the EPA maximum of 0.08 mg/L. Bladder & rectal cancer risk; reproductive concerns. Consider granular activated carbon (GAC) filtration.
Surface Water Treatment Rule at 4 mg/L exceeds the EPA maximum of mg/L.
Radium-228 at 1 pCi/L (combined Radium-226 & 228 ≤ 5 pCi/L) exceeds the EPA maximum of pCi/L (combined Radium-226 & 228 ≤ 5 pCi/L). Bone cancer and leukemia (known carcinogen). Consider ion exchange (water softener) filtration.
Consumer Confidence Report Rule at 1 mg/L exceeds the EPA maximum of mg/L.
PFAS Detected in Service Area
PFAS ("forever chemicals") have been detected in water serving this system's area. 2 detections recorded.
Total Trihalomethanes (TTHM) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.
Find a certified water filter →Comparable Water Systems
Similar-sized systems in Indiana
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Clinton Water Utility (EPA ID: IN5283004) is a community water system in Indiana that serves approximately 4,773 people from groundwater sources.
This system serves ZIP code 47842 in Clinton.
Average Home Safety Score: D (48/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| July 1, 2025 | Surface Water Treatment Rule | Monitoring | Unresolved |
| July 1, 2025 | Radium-228 | Monitoring | Unresolved |
| July 1, 2024 | Surface Water Treatment Rule | Monitoring | Resolved |
| March 1, 2024 | Consumer Confidence Report Rule | Monitoring | Resolved |
| July 1, 2023 | Surface Water Treatment Rule | Monitoring | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Surface Water Treatment Rule | Treatment Failure | 4 | No |
| Total Trihalomethanes (TTHM) | Disinfection Byproducts | 1 | No |
| Radium-228 | Radionuclides | 1 | No |
| Consumer Confidence Report Rule | Reporting Failure | 1 | No |
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
| ZIP Code | Lead Level | Exceeds Limit | Sample Date |
|---|---|---|---|
| 47842 | 0.0068 mg/L | No | N/A |
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by IN or modeled from parcel and building-footprint data.
- 47842 — Clinton
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Clinton Water Utility (IN5283004) on EPA.gov.
Frequently Asked Questions
Is Clinton Water Utility water safe to drink?
Clinton Water Utility has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.
How many people does Clinton Water Utility serve?
Clinton Water Utility serves approximately 4,773 people across 1 ZIP code in Indiana.
Where does Clinton Water Utility get its water?
The primary water source is groundwater.
Federal UCMR5 PFAS Monitoring: Detected
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). PFAS compounds were detected below the current state-enforceable MCL.
Current MCL reflects the lowest state-enforceable limit (NYS 10 ppt for PFOA/PFOS, effective August 2020). The federal final MCL of 4 ppt for PFOA/PFOS (EPA April 2024 rule) is not enforceable until April 2029. Detections above 4 ppt but below 10 ppt are below current MCL but above the future federal limit.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Clinton Water Utility (EPA ID: IN5283004) — request the latest Consumer Confidence Report or ask about specific contaminants.