Pike-gibson Water, Inc.
EPA ID: IN5263003 · 10,000 people served · 1 ZIP code
ZipCheckup's reading of EPA records for Pike-gibson Water, Inc. (IN5263003): 1 health-based violation recorded since 2021. Every entry among the 3 violations in EPA records for Pike-gibson Water, Inc. has a resolved status in the data; this utility delivers water to about 10,000 people.
Data: EPA SDWIS
Service Area Map
Coverage area for Pike-gibson Water, Inc. Source: EPA SDWIS service area boundaries.
Service area boundary
Demographics of ZIP Codes Served
The ZIP codes associated with Pike-gibson Water, Inc. have a median household income of $65,893 and about 2,908 residents live in those ZIP codes (Census; not the number of people this system supplies). Approximately 67% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
🌊 Where Does Your Water Come From?
Pike-gibson Water, Inc.'s water is drawn from rivers, lakes, or reservoirs. Surface water sources are more exposed to agricultural runoff, stormwater, and upstream discharges, but they typically receive more intensive treatment before reaching your tap.
Wastewater Proximity Note: This service area ranks in the 60th percentile nationally for proximity to wastewater discharge points. Surface water sources near wastewater outfalls may face additional treatment challenges.
Infrastructure Risk
PFAS in ZIP Codes This System Serves
PFAS ("forever chemicals") have been reported in samples from water systems associated with the ZIP codes in this system's area. These results can come from other water systems serving the same ZIP codes; check the UCMR5 section for any results reported for this system. 5 detections recorded. 1 detection is above the level of a federal PFAS MCL (4 ppt for PFOA and PFOS), with compliance required from 2029.
Comparable Water Systems
Similar-sized systems in Indiana
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
Pike-gibson Water, Inc. (EPA ID: IN5263003) is a community water system in Indiana that serves approximately 10,000 people from surface water sources.
This system serves ZIP code 47598 in Winslow.
Violation History
Status breakdown for accepted records with record years 2021-2026: 3 resolved, 0 archived, 0 addressed, and 0 unaddressed. Under this source contract, current noncompliance is the sum of addressed and unaddressed records. Archived and resolved records are excluded from current noncompliance.
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| January 1, 2025 | Public Notice | Non-health-based | Resolved |
| October 17, 2024 | LEAD AND COPPER RULE REVISIONS | Health-based | Resolved |
| October 17, 2024 | LEAD AND COPPER RULE REVISIONS | Non-health-based | Resolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| LEAD AND COPPER RULE REVISIONS | Treatment Technique, Monitoring & Reporting | 2 | Yes |
| Public Notice | Other (notice or report rule) | 1 | No |
Lead & Copper
EPA Lead and Copper Rule evidence attributed directly to this water system:
| Lead Level | Exceeds Action Level | Sample Date |
|---|---|---|
| 0.0069 mg/L | No | 2025-12-31 |
No copper action-level exceedance record appears for this PWSID in the accepted LCR snapshot. This does not establish a clean copper measurement.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Ask your water utility whether running cold water for 2 minutes is enough to flush your plumbing before drinking.
ZIP Codes Served
Coverage: Service area ZIP codes sourced from EPA Community Water System Service Area Boundaries v3 (March 2026 release). These ZIPs reflect the actual deployment footprint recorded by IN or modeled from parcel and building-footprint data.
- 47598 - Winslow
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View available EPA compliance records for Pike-gibson Water, Inc. (IN5263003) on EPA.gov.
Frequently Asked Questions
Is Pike-gibson Water, Inc. water safe to drink?
The accepted 2026Q2 ECHO snapshot shows no current noncompliance for Pike-gibson Water, Inc.; its 3 accepted 2021-2026 records are resolved or archived. Historical compliance status does not establish conditions at a specific tap.
How many people does Pike-gibson Water, Inc. serve?
Pike-gibson Water, Inc. serves approximately 10,000 people across 1 ZIP code in Indiana.
Where does Pike-gibson Water, Inc. get its water?
The primary water source is surface water.
Federal UCMR5 PFAS Monitoring: Sample Above an EPA MCL Value or State Standard
This water system was tested under the federal EPA Unregulated Contaminant Monitoring Rule (UCMR5). One or more PFAS measurements were above the level of the EPA MCL for that compound (April 2024 rule, which takes effect in 2029) or above an applicable state drinking-water standard; a monitoring result above that level is not by itself a violation.
EPA's April 2024 PFAS rule sets MCLs of 4 ppt for PFOA and PFOS and 10 ppt for PFHxS, PFNA and HFPO-DA (GenX); water systems must comply from 2029. Other PFAS compounds have no individual federal MCL. A state standard is shown only where this system's state has its own enforceable PFAS limit. Detection results are EPA UCMR5 samples, not a measurement at your tap.
Source: U.S. EPA UCMR5 (Unregulated Contaminant Monitoring Rule, 5th cycle) — per-system federal sampling, 2023–2025. EPA UCMR5 monitoring program →
Frequently Asked Questions
How to cite this page
ZipCheckup. (n.d.). Pike-gibson Water, Inc. (IN): 1 Health Violation. https://zipcheckup.com/water-system/in5263003/
@misc{zipcheckup-water-system-in5263003,
author = {{ZipCheckup}},
title = {{Pike-gibson Water, Inc. (IN): 1 Health Violation}},
year = {n.d.},
url = {https://zipcheckup.com/water-system/in5263003/}
}
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
Pike-gibson Water, Inc. (EPA ID: IN5263003) - request the latest Consumer Confidence Report or ask about specific contaminants.