Monitoring Violations IN

Butler Water Department

EPA ID: IN5217003 · 2,700 people served · 3 ZIP codes

Based on the latest federal compliance data, Butler Water Department has 2 violations that the EPA has not yet closed — those outstanding findings are part of the enforcement record for a utility that delivers water to approximately 2,700 people throughout its service territory.

Data: EPA SDWIS Last verified: 2026-04-02

C · 67
Avg Safety Score
2,700
People Served
3
ZIP Codes Served
2
Violations (5yr)
Groundwater
Water Source
0.008 mg/L
Max Lead Level
2
Contaminants Flagged
$178K
Median Home Value in Service Area

Compliance Trajectory

Worsening · Risk tier: High · 95% chance of violation in next 12 months

Violations went from 1 (2023) to 1 (2025). The pattern suggests growing compliance challenges.

Service Area Map

Coverage area for Butler Water Department Source: EPA SDWIS service area boundaries.

Service area boundary — Grade C

Service Area Demographics

$68,958
Median Household Income
10,642
Service Area Population
11%
Disadvantaged Population
50th
Poverty Percentile
40th
Energy Burden Percentile
67%
Pre-1986 Housing

The Butler Water Department serves a community with a median household income of $68,958 and an estimated 10,642 residents across its service area. Approximately 67% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.

💧 Where Does Your Water Come From?

Groundwater

Butler Water Department's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.

Moderate Risk
Source Contamination Risk
50th
Wastewater Discharge Proximity
30th
Superfund Site Proximity

About 0% of homes in DeKalb County, Indiana rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.

Infrastructure Risk

59 yr
Avg Pipe Age
Copper
Pipe Material
12 yr
Est. Remaining Life
Moderate Wear
Decay Status
Installed 83% of expected lifespan used End of life

Detected Contaminants

How Butler Water Department compares to EPA limits

What This Means For You

Stage 1 DBP Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Surface Water Treatment Rule at 1 mg/L exceeds the EPA maximum of mg/L.

Comparable Water Systems

Similar-sized systems in Indiana

C 0 violations
B 1 violation
C 11 violations
0 violations
B 0 violations

Estimated Remediation Costs

Average estimated costs across ZIP codes served by this system

Flood Insurance Water Filtration
Flood Insurance $1,200
Water Filtration $150
Total Estimated Cost $1,350

Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.

Cost of Inaction

If water quality issues in this service area are not addressed, the estimated financial impact per household is:

Estimated Healthcare Costs $500

Annual per household (CDC est.)

Estimated Cumulative Cost Per Household

5 years
$2,500
10 years
$5,000
20 years
$10,000

Compare: Estimated remediation cost is $1,350 (one-time) vs. $5,000 in estimated inaction costs over 10 years.

Estimates based on published EPA, CDC, and peer-reviewed research. Individual costs vary by household size, property, and health factors. These are conservative lower-bound estimates intended for awareness, not financial advice.

System Overview

Butler Water Department (EPA ID: IN5217003) is a community water system in Indiana that serves approximately 2,700 people from groundwater sources.

This system provides water to 3 ZIP codes across 3 communities.

Average Home Safety Score: C (67/100)

Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.

Violation History

2 monitoring/reporting violations recorded. These are procedural violations (missed tests or late reports), not necessarily water safety issues.

Recent Violations

Date Contaminant Type Status
July 1, 2025 Surface Water Treatment Rule Monitoring Unresolved

Contaminants Detected

The following contaminants have been flagged in EPA records for this water system:

Contaminant Category Violations Health-Based
Stage 1 DBP Rule Treatment Failure 1 No
Surface Water Treatment Rule Treatment Failure 1 No

Lead & Copper

EPA Lead and Copper Rule sampling data for ZIP codes served by this system:

ZIP Code Lead Level Exceeds Limit Sample Date
46721 0.008 mg/L No N/A

Need help with your water quality?

Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400

Find the Right Water Filter

Free tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.

ZIP Codes Served

Coverage: 1 ZIP code confirmed via EPA Community Water System Service Area Boundaries v3 plus 2 additional ZIPs inferred from SDWIS registry data. The EPA-confirmed set is the most reliable; SDWIS-inferred entries may be narrower than the real deployment area.

Data Sources

This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for Butler Water Department (IN5217003) on EPA.gov.

Frequently Asked Questions

Is Butler Water Department water safe to drink?

Butler Water Department has only monitoring/reporting violations, which are procedural in nature. The system meets federal health-based standards.

How many people does Butler Water Department serve?

Butler Water Department serves approximately 2,700 people across 3 ZIP codes in Indiana.

Where does Butler Water Department get its water?

The primary water source is groundwater.

Lead Service Line Inventory

Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:

0
Confirmed Lead
0
Galvanized — Replacement Required
0
Unknown Material
1,471
Confirmed Non-Lead

This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.

Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.

Federal Regulatory Status · 2026Q1
LCRR inventory submission: Reported all required service line types
Latest tap sample on 2025-01-01 did not exceed the federal lead action level.
Population served: 2,700
Reported to Indiana

Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026

ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.

Learn about lead in drinking water →

Frequently Asked Questions

Is water from Butler Water Department safe to drink?
Butler Water Department has a C safety grade based on 2 recorded violations. Some contaminants may exceed EPA limits — independent testing is recommended.
What contaminants are in Butler Water Department's water?
Detected contaminants include Stage 1 DBP Rule, Surface Water Treatment Rule. Each is compared against EPA maximum contaminant levels (MCLs) in the detailed breakdown above.
Should I use a water filter?
Given 2 contaminants above EPA limits, a certified water filter can provide an extra layer of protection. The best type depends on specific contaminants in your water.
How many people does Butler Water Department serve?
Butler Water Department serves approximately 2,700 people with drinking water across 3 ZIP codes.
What is Butler Water Department's water source?
Butler Water Department draws water from groundwater sources. Source type affects which contaminants are most likely to be present.
Is there lead in Butler Water Department's water?
The maximum detected lead level is 0.008 mg/L. This is within EPA action level guidelines.
What is the demographic profile of Butler Water Department's service area?
The Butler Water Department service area has a median household income of $68,958. Demographic data is sourced from the U.S. Census Bureau and EPA EJScreen.
Where does Butler Water Department get its water?
Butler Water Department's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table. Based on available data, the source contamination risk is moderate.

What You Can Do

1

Test your water

Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →

2

Check your specific ZIP code

Water quality can vary within a system. View nearest ZIP report →

3

Contact your utility

Butler Water Department (EPA ID: IN5217003) — request the latest Consumer Confidence Report or ask about specific contaminants.

Home Water Systems Indiana Butler Water Department

Get safety alerts for Butler Water Department, Indiana

Free updates when EPA data changes for this area. No spam.

Unsubscribe anytime. Privacy Policy.

Share This Page

X Facebook
Violations found — check filter options Free tool — no phone call required.