St. Paul Municipal Water
EPA ID: IN5216004 · 1,096 people served · 3 ZIP codes
Right now, St. Paul Municipal Water shows 5 EPA violations marked active and unresolved — the provider continues to supply approximately 1,096 residents while each finding awaits closure.
Data: EPA SDWIS Last verified: 2026-04-02
Compliance Trajectory
Worsening · Risk tier: High · 95% chance of violation in next 12 months
Violations went from 3 (2024) to 3 (2025). The pattern suggests growing compliance challenges.
Service Area Map
Coverage area for St. Paul Municipal Water Source: EPA SDWIS service area boundaries.
Service area boundary — Grade D
Service Area Demographics
The St. Paul Municipal Water serves a community with a median household income of $58,154 and an estimated 2,064 residents across its service area. Approximately 69% of housing stock was built before 1986, which increases the likelihood of lead service lines and older plumbing.
💧 Where Does Your Water Come From?
St. Paul Municipal Water's water is pumped from underground aquifers. Groundwater is naturally filtered through rock and soil, but it can be vulnerable to PFAS contamination, nitrates from agriculture, and industrial chemicals that seep into the water table.
About 3% of homes in Rush County, Indiana rely on private wells rather than public water systems. Private well owners are responsible for their own water testing and treatment.
Infrastructure Risk
Detected Contaminants
How St. Paul Municipal Water compares to EPA limits
What This Means For You
Total Trihalomethanes (TTHM) at 1 mg/L exceeds the EPA maximum of 0.08 mg/L. Bladder & rectal cancer risk; reproductive concerns. Consider granular activated carbon (GAC) filtration.
Consumer Confidence Report Rule at 4 mg/L exceeds the EPA maximum of mg/L.
Surface Water Treatment Rule at 3 mg/L exceeds the EPA maximum of mg/L.
Stage 1 DBP Rule at 2 mg/L exceeds the EPA maximum of mg/L.
Contaminant 1045 at 1 mg/L exceeds the EPA maximum of mg/L.
Total Trihalomethanes (TTHM) was detected in this water system. granular activated carbon (GAC) filtration can reduce exposure.
Find a certified water filter →Comparable Water Systems
Similar-sized systems in Indiana
Estimated Remediation Costs
Average estimated costs across ZIP codes served by this system
Based on national averages for common remediation projects. Actual costs vary by property. Only issues flagged by EPA, FEMA, or state data for each ZIP code are included.
System Overview
St. Paul Municipal Water (EPA ID: IN5216004) is a community water system in Indiana that serves approximately 1,096 people from groundwater sources.
This system provides water to 3 ZIP codes across 3 communities.
Average Home Safety Score: D (51/100)
Based on water quality violations, lead levels, and radon risk across all ZIP codes served by this system.
Violation History
Recent Violations
| Date | Contaminant | Type | Status |
|---|---|---|---|
| July 31, 2025 | Contaminant 0700 | Health-based | Unresolved |
| July 1, 2025 | Surface Water Treatment Rule | Monitoring | Unresolved |
| July 1, 2024 | Surface Water Treatment Rule | Monitoring | Resolved |
| June 1, 2024 | Consumer Confidence Report Rule | Monitoring | Resolved |
| May 1, 2024 | Consumer Confidence Report Rule | Monitoring | Resolved |
| April 26, 2024 | Chlorine residual | Health-based | Resolved |
| April 1, 2024 | Consumer Confidence Report Rule | Monitoring | Resolved |
| January 1, 2024 | Contaminant 1045 | Monitoring | Resolved |
| January 1, 2024 | Stage 1 DBP Rule | Monitoring | Unresolved |
Contaminants Detected
The following contaminants have been flagged in EPA records for this water system:
| Contaminant | Category | Violations | Health-Based |
|---|---|---|---|
| Consumer Confidence Report Rule | Reporting Failure | 4 | No |
| Surface Water Treatment Rule | Treatment Failure | 3 | No |
| Stage 1 DBP Rule | Treatment Failure | 2 | No |
| Contaminant 1045 | Other Violation | 1 | No |
| Total Trihalomethanes (TTHM) | Disinfection Byproducts | 1 | No |
| Chlorine residual | Disinfectant | 1 | Yes |
| Contaminant 0700 | Other Violation | 1 | Yes |
Health Risk Details
Chlorine (Residual Disinfectant) (EPA limit: 4 mg/L (MRDL — Maximum Residual Disinfectant Level))
Irritation & DBP formation at high levels; protective at normal treatment levels At-risk groups: people with asthma or chemical sensitivities, kidney dialysis patients (water must be dechlorinated).
Removal methods: granular activated carbon (GAC), KDF media filter, carbon block filter. Find the right filter →
Lead & Copper
EPA Lead and Copper Rule sampling data for ZIP codes served by this system:
| ZIP Code | Lead Level | Exceeds Limit | Sample Date |
|---|---|---|---|
| 46104 | 0.00148 mg/L | No | N/A |
Radon Risk in Service Area
Dominant radon zone for ZIP codes served by this system: Zone 1 (High Risk)
The EPA recommends testing homes in Zone 1 and Zone 2 areas for radon.
Need help with your water quality?
Typical cost: Water test: typically $20–$50 (DIY kit) · Professional inspection: $150–$400
Find the Right Water FilterFree tip: Let cold water run for 2 minutes before drinking — this helps flush lead from your pipes.
ZIP Codes Served
Data Sources
This report uses public data from the EPA Safe Drinking Water Information System (SDWIS). View the full compliance record for St. Paul Municipal Water (IN5216004) on EPA.gov.
Frequently Asked Questions
Is St. Paul Municipal Water water safe to drink?
St. Paul Municipal Water has recorded 2 health-based violations in the past 5 years. While the system is required to treat water to meet federal standards, you may want to consider additional precautions such as a certified water filter.
How many people does St. Paul Municipal Water serve?
St. Paul Municipal Water serves approximately 1,096 people across 3 ZIP codes in Indiana.
Where does St. Paul Municipal Water get its water?
The primary water source is groundwater.
Lead Service Line Inventory
Service line breakdown reported under the federal Lead and Copper Rule Improvements (LCRI) inventory requirement:
This system reports zero confirmed lead service lines in its inventory. Unknown-material counts may still warrant verification.
Federal LCRI rule (effective October 2024) requires every public water system to inventory its service lines and complete lead-line replacement within 10 years.
Source: EPA SDWIS Federal Service Line Inventory (Phase 2) · Submitted 2026
ZipCheckup is not affiliated with the utility or state agency. Inventory figures render verbatim from the public LCRI submission cited above; ZipCheckup does not perform inspections or replacements.
Frequently Asked Questions
What You Can Do
Test your water
Home test kits can detect lead, bacteria, and other contaminants at your tap. Find the right filter →
Check your specific ZIP code
Water quality can vary within a system. View nearest ZIP report →
Contact your utility
St. Paul Municipal Water (EPA ID: IN5216004) — request the latest Consumer Confidence Report or ask about specific contaminants.